Investigation of Oblique Blast Loading on Trapezoidal Corrugated Core Sandwich Panels; Experimental and Numerical Study
In this work dynamic response of trapezoidal corrugated core sandwich panels subjected to oblique blast loading are studied both numerically and experimentally. The stand-off distance which has been determined from sandwich panel to center of the nearest face of the explosive cylinder is considered 300 mm. the experiments was performed at Four blast tube with different included angles of 0°, 15°, 30° and 45° respect to sandwich target plate. The results of numerical simulation, obtained using coupled Eulerian – Lagrangian (CEL) method at ABAQUS/Explicit software. Maximum mid- point deflection of back and front faces are compared with experiment results. The results show that with increasing angle of tilt of explosive the amount of back face deflection at angles of tilt 15°, 30° and 45° respect to the case of 0°, 4.68%, 5.86% and 9.77% decreases respectively. It is found that at the z direction, deformation profile is completely dome-shaped while the profile in the x direction is almost conical. The achieved results can be used to optimization designing of military vehicles and employed for civil infrastructure.
- حق عضویت دریافتی صرف حمایت از نشریات عضو و نگهداری، تکمیل و توسعه مگیران میشود.
- پرداخت حق اشتراک و دانلود مقالات اجازه بازنشر آن در سایر رسانههای چاپی و دیجیتال را به کاربر نمیدهد.