Journal of Dental Research, Dental Clinics, Dental Prospects
Volume:15 Issue: 1, Winter 2021

This study aimed to evaluate the surface scale changes in the denture base material using different polymerization techniques, such as heat-cure/pressure polymerization system and injection molding technique with the stereophotogrammetric technique. The function of a complete denture is related to the adaptation of its base to the supporting areas. Proper adaptation of the base depends on the stability and retention of dentures. The surface scale changes of dentures during processing and in service are of great importance since they affect the denture base material’s fit.

This study focused on the use of a computer-assisted stereophotogrammetric method for measuring changes in the volume of three different denture base resins of an edentulous maxillary ridge. A stone master model simulating the shape of an edentulous maxillary arch was used to prepare three groups of denture base resins. The stereophotographs were evaluated to determine the surface scale differences of maxillary jaws.

 The results showed no significant differences between the denture borders for three denture base materials (P > 0.05).

In the evaluation made using this technique, no significant difference was found in the different polymerization techniques in terms of surface scale changes for three denture base materials. Stereophotogrammetry, especially the digital stereophotogrammetric technique, has several useful research applications in prosthodontics.

Acid etching and bonding is a routine process in orthodontic treatment. The present study aimed to evaluate enamel discoloration after using different types of acid etching and adhesive agents.

A total of 105 extracted human premolars were divided into six groups regarding the type of acid etching agent: solution and gel of 37% phosphoric acid, and type of selfcured adhesive agent: Unite (3M, fluoride-free), Resilience (Ortho Technology), and Rely-aBond (Reliance, fluoride-releasing adhesive), with each group containing 15 specimens. All the selected teeth were subjected to a staining process, and color parameters were determined using a spectrophotometer.

 The type of phosphoric acid (solution or gel) had no significant effect on the color change of enamel (P>0.05). Resilience significantly changed the enamel color compared to the Unite and Rely-a-Bond (P<0.001). There was no significant difference in color change between the Unite and Rely-a-Bond adhesives (P=0.67). The difference in color change between all the three time intervals (T0-T1, T1-T2, and T0-T2) was significant (P<0.001).

In this study, the type of phosphoric acid (solution or gel) did not result in any significant difference in enamel color. Also, considering the lack of the effect of the orthodontic adhesive type in terms of fluoride release or no fluoride release, it can be concluded that this is most affected by the commercial brand of adhesives.

Background:

 The present study aimed to assess and compare the pain perception and ulcer sizes before and after applying low-level laser therapy (LLLT) and Amlexanox + lidocaine.

Methods:

Twenty-six patients referring to the out-patient department of the institution and diagnosed with recurrent aphthous ulcers (RAU) were assigned to two groups to receive either LLLT or Amlexanox + lidocaine. In group 1, the patients were provided with amlexanox + lidocaine to apply topically four times daily. In group 2, the patients underwent LLLT with no tissue contact in inward circular motions for two cycles for 30 seconds. This study was registered in “the Clinical Trials Registry- India” (CTRI), with the registration number CTRI/2019/09/028222. The data were analyzed with SPSS 16.

Results:

 The intergroup comparison was performed using Mann-Whitney U test, and intragroup comparisons were made using Wilcoxon’s signed-rank test. The level of significance was set at P<0.05. The results showed that pain perception and ulcer size were significantly lower in group 2 subjects than group 1 subjects (P<0.05).

Conclusion:

 LLLT was more effective than amlexanox + lidocaine in the management of RAU. It is a cost-effective therapy for treating RAU.

This study evaluated the incorporation of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), calcium sodium phosphosilicate bioactive glass (BAG), chitosan (CH), and methacryloyloxydodecylpyridinium bromide (MDPB) on the compressive and flexural strength, fluoride (F‒ ) release, and bacterial adhesion of conventional glass-ionomer cement (C-GIC).

 Modifications were implemented by adding CPP-ACP, BAG, and CH to the glass powder, while MDPB-GIC was prepared by incorporating MDPB to the liquid of C-GIC. Custom-made molds were used for specimen preparation. Compressive and flexural strengths were evaluated using a universal testing machine. F‒ release was calculated with Erichrome cyanide reagent, using UV-spectrophotometry, at two time intervals of 24 hours and seven days. For bacterial adhesion, the test specimens were exposed to the bacterial suspension of Streptococcus mutans and Lactobacillus acidophilus for 4 hours, and the adherent bacteria were quantified using colorimetry as the optical density (OD).

The incorporation of MDPB increased the flexural strength of C-GIC, with no effect on its compressive strength. CH significantly improved the compressive and flexural strength; modifications with CPP-ACP, BAG, and MDPB significantly improved the flexural strength of C-GIC. While MDPB-GIC released significantly higher F‒ at 24 hours, CPP-ACP- and BAGmodified GICs were comparable to C-GIC on day 7. C-GIC exhibited the highest bacterial adhesion, and MDPB-GIC showed the least. The data were analyzed with one-way (ANOVA), and pairwise comparisons were made with Tukey HSD tests.

Hence, it can be concluded that the incorporation of CPP-ACP, BAG, and CH improved the mechanical properties of C-GIC, whereas MDPB improved the resistance of C-GIC to bacterial adhesion.

Large mandibular defects are considered difficult reconstructive challenges for oral and maxillofacial surgeons. Cell therapy, as an alternative technique, might increase the speed of bone regeneration. This study aimed to investigate bone regeneration in large defects of dog mandibles using allogenic adipose-derived stem cells on gelatin foam as a cell carrier.

The tissue engineering phase consisted of the sampling of adult dogs’ adipose tissue that can easily be isolated from adipose stem cells (ASCs) of the dogs, ASCs were cultured in Dulbecco’s Modified Eagle’s Medium (DMEM, Gibco, USA) with low glucose, containing 10% fetal bovine serum (FBS) (Sigma, USA) and 1% penicillin-streptomycin (Gibco, USA), with the characterization of dog ASCs and gelatin-transplanted ASCs. Six dogs were included in this experimental study in the next step and randomly assigned to the treatment and control groups. The samples in both groups underwent surgery under general anesthesia to create uniform 3-cm bony defects. The samples in both groups were reconstructed with titanium reconstruction plates and screws. A large bone gap filled with ASCs (5×106 ) was seeded on gelatin (ASCs) in the treatment group. In the control group, bony defects were filled with a cell delivery carrier without ASCs. Six months after transplantation, the animals’ mandibles were evaluated by CT scan imaging, and the results were quantified through the Hounsfield unit (HU). The data were analyzed with t-test.

Before transplantation, the nature of the stem cells was confirmed by the expression of CD44 and CD105 cell markers at 71.9% and 89.3%, respectively, and a lack of the CD45 cell marker expression at 2.2%. Evaluation of CT scan images showed significantly higher bone repair in the ASCs group (920.25±572.92 HU) than in the control group (-94.746± 08.42).

The bone regeneration of the ASCs group was significantly higher than that in the control group

Background:

 This research aimed to investigate and compare the amount of apically extruded debris after root canal preparation using ProTaper Next, ProTaper Gold, and TruNatomy systems.

Methods:

 Forty-five extracted mandibular premolar teeth with single canals with similar lengths were used. The root canals were prepared using ProTaper Next (Dentsply Maillefer, Ballaigues, Switzerland), ProTaper Gold (Dentsply Maillefer, Ballaigues, Switzerland), or TruNatomy (Dentsply Maillefer, Ballaigues, Switzerland) files. Apically extruded debris during preparation was gathered into preweighed Eppendorf tubes. Then the Eppendorf tubes were incubated at 70°C for five days. The Eppendorf tubes were weighed again to determine their final weight plus the extruded debris.

Results:

 The TRN system resulted in significantly less debris extrusion than the PTN system (P<0.05). There was no significant difference between the PTN and PTG groups and between the PTG and TRN groups (P>0.05).

Conclusion:

All the instrumentation systems caused apical extrusion of debris. However, the TRN system resulted in significantly less debris extrusion than the other systems.

 Pediatric endodontics is a field with constant evolution, resulting in the shifting of paradigms from the use of conventional hand files to rotary files for biomechanical preparation in primary teeth. Biomechanical preparation plays a crucial role in the success of root canal treatment. Primary teeth need special attention since they differ from permanent teeth in root canal morphology. Cleaning and shaping of the canals damage the root dentin, leading to dentinal cracks. Newer techniques for root canal preparation, including Ni-Ti rotary files and SAF system, have been developed for use in pediatric endodontics to overcome the drawbacks of conventional methods. The present study compared dentinal defects formed by rotary systems in primary teeth.

Methods:

 Eighty primary teeth were included. The teeth were decoronated with a diamond disc. All the roots were inspected for any pre-existing cracks or craze lines under transmitted light under a stereomicroscope. The specimens were then divided into four groups (n=20): group 1: control, group 2: hand files (HF), group 3: ProTaper files, and group IV: SAF files. The samples were instrumented according to the group they were assigned to.

Results:

The HF and SAF groups exhibited fewer microcracks. Dentinal microcracks were observed in roots prepared with rotary ProTaper files. There were significant differences between HF/SAF and rotary files (P<0.05).

Stainless steel hand K-files and SAF instruments resulted in fewer dentinal damage than the ProTaper Universal files. SAF exhibited satisfactory results with minimal or no crack formation.

 Dental hypersensitivity is due to the exposure of the dentin layer after wear of enamel or cementum, exposing the dentinal tubules and the nerve endings of odontoblasts within these tubules. The present study aimed to assess the factors related to dental hypersensitivity in individuals with cleft lip and palate and the most common therapy received.

 The medical records of 536 patients with cleft lip and/or palate (281 males, 255 females) with a mean age of 18 were analyzed in a single center. The inclusion criterion was patients reporting dental hypersensitivity from May 2015 to October 2019. The origin of dental hypersensitivity was evaluated considering orthodontic movement, periodontal diseases, and reversible and irreversible pulpitis. The therapy indicated by the dental professionals for dental hypersensitivity were recorded. Descriptive statistics were performed.

Of 61 teeth with dental hypersensitivity, 10 were attributed to orthodontic movement, 21 to periodontal problems, 27 to reversible pulpitis, and three to irreversible pulpitis. The most used therapies were the application of fluoride varnish and prophylaxis, dentifrice indication for dental sensitivity, free gingival grafts, pulpectomy, desensitizing agent application, conservative endodontic treatment (direct pulp protection), and restoration of non-carious cervical lesions.

Reversible pulpitis was the most prevalent etiologic factor of dental hypersensitivity in individuals with cleft lip and palate. Dentifrices for dental sensitivity and fluoride varnish application were frequently recommended.

Background:

The main goal of our study was to assess the volume of dentin removed and transportation in root canals using ProTaper Universal (PTU), ProTaper Gold (PTG) and OneCurve (OC). Ni-Ti rotary instruments in extracted human teeth using by micro-CT.

Thirty human upper 1st premolar teeth with two separate root canals and sturdy, mature root tips were used in the present study. Specimens were decoronated and root length was standardized for micro CT scanning before root canal preparation done. The teeth were randomly separated into three categories (n = 10) according to the rotary NiTi system used for canal instrumentation, i.e., PTU (Dentsply, Maillefer), PTG (Dentsply, Maillefer), and OC (Micro-Mega SA). After root canal preparation, samples were scanned again on micro-CT by the same scanning parameters. Surface area, canal volume, structure model index (SMI), percentage of uninstrumented area and transportation parameters were obtained for each sample before and after micro-CT analyse.

No significant differences between the PTG and PTU in terms of the total volume of removed dentin, surface area and percentage of uninstrumented areas were found. However, regarding to parameters above, OC showed a lower efficacy than PTG and PTU in coronal section. Regarding canal transportation, PTG and OC showed lower mean transportation values at all levels.

This paper demonstrated the root canal shaping abilities of the PTU, PTG, and OC NiTi file systems. The PTG and OC systems were associated less canal transportation and a better ability to preserve dentinal walls than PTU. There was no significance different between all rotary file systems for SMI values however, PTU and PTG showed greater canal volume and surface area change than OC file systems in coronal section.

 Post-cured composite resins exhibit improvements in physical and mechanical properties due to additional polymerization conversion. However, the post-curing techniques might influence the color stability of composite resin materials. Thus, this study evaluated the color stability of a nanofilled composite resin (Filtek Z350 XT - 3M ESPE) subjected to different post-curing techniques.

Sixty samples (color A2) were randomly allocated to six experimental groups (n=10): G1: photoactivation (P) (control); G2: P + microwave oven with distilled water; G3: P + microwave oven without distilled water; G4: P + conventional oven; G5: P + dry-heat sterilizer; G6: P + steam autoclave. All the groups were stored in distilled water for 60 days and immersed daily in 5 mL of a coffee solution for 3 minutes. The color readings (CIEL*a*b* system) were performed at two different time intervals, initially and after 60 days, in a reflectance spectrophotometer (UV-2600; Shimadzu). The colorimetric readings were performed using the Color Analysis software (CIEL*a*b* system).

Group G6 exhibited significantly low values of total color change (ΔE=13.16). The control (ΔE=15.32) and G5 (ΔE=15.49) groups exhibited intermediate values, with no difference between them. In turn, the groups in which the resin was heated in a microwave (G2 ΔE=18.55 and G3 ΔE=19.45) exhibited the most significant color changes (one-way ANOVA and Tukey test, P≤0.05).

Steam autoclave post-polymerization increased the color stability of the nanofilled resin subjected to artificial aging and coffee immersion.

Background:

The Flip-Lock Herbst (TP Orthodontics Inc.) is a fixed functional appliance, a variant of the Herbst appliance, introduced by Miller. It is claimed to have better patient tolerance due to its increased freedom for the mandible’s lateral movements. There have been no studies on the flip lock Herbst till date. This study was undertaken to assess the efficiency of the Flip-Lock Herbst appliance in correcting Angle’s class II division 1 malocclusion.

Methods:

 Eight subjects in their active growth period with class II division 1 malocclusion due to a retrognathic mandible were included in the study. Standardized lateral cephalometric radiographs were used to evaluate skeletal and dental changes with the SO analysis. Paired samples t-test was used to assess statistical significance.

Results:

 Statistically significant increases in mandibular length (pg/OLp) and effective mandibular length (ar/OLp + pg/OLp) were observed. There was a significant maxillary restraining effect. Dental effects were significant and exhibited class II correction features except for the position of lower incisors within the mandible (ii/OLp - pg/OLp). Skeletal changes accounted for 61% and dental changes for 39% of the total treatment for molar correction. For overjet correction, skeletal changes contributed to 63% and dental changes to 37% of the total treatment.

Conclusion:

 The Flip-Lock Herbst appliance was efficient in correcting Angle’s class II division 1 malocclusion due to a retrognathic mandible. Both skeletal and dental changes were evident, with the former predominating (60:40).

Ki-67 is a marker of cell proliferation, used as an important diagnostic marker in the pathologic differentiation of various lesions. It is also relevant for developing targeted molecular therapies. We carried out a systematic review to assess the Ki-67 labeling index (LI) in odontogenic cysts and tumors. Databases were searched, including PubMed (MEDLINE), Scopus, CINHAL, PsycoInfo, the Cochrane Library, and Proquest. The meta-analysis was carried out based on the data of 608 lesions. When a 5% cut-off point was set, ki-67 LI of all benign odontogenic tumors dropped below this point. All the malignant tumors demonstrated an LI of over 15.3%; a significantly higher Ki-67 LI in malignant odontogenic lesions (17.59±2.80) was observed. Among benign tumors, the largest and the smallest Ki-67 LIs were seen in ameloblastoma (4.39±0.47) and adenomatoid odontogenic tumor (0.91±1.71). The mean values of Ki-67 LI in tumors and cysts were 4.23 (0.38) and 1.04 (0.07), respectively. Among odontogenic cysts, the highest Ki-67 LI was found in odontogenic keratocyst (OKC) (3.58±0.51), and the lowest in the radicular cyst (1.29±0.62%). Ki-67 LIs in all odontogenic cysts were <3%, except for OKC. This controversial lesion seems to have a profile more similar to a tumor, and a treatment plan similar to tumors might be suggested. We found that odontogenic lesions have diverse proliferative activities that help differentiate between various lesions and suggest therapeutic plans.