Journal of Dental Research, Dental Clinics, Dental Prospects
Volume:17 Issue: 2, Spring 2023

 The purpose of this systematic review was to assess the clinical efficacy (sensitivity reduction) and safety (gum damage) of silver diamine fluoride (SDF) as a tooth desensitizer for adults.

 The search strategy was developed and adapted from 12 databases. Two independent reviewers selected the studies in consensus with a third reviewer. Randomized clinical trials with adult volunteers affected by dentin hypersensitivity (DH), and receiving treatment with SDF were included. Studies with volunteers testing tooth whitening products, using some type of desensitizer, or taking analgesic or anti-inflammatory medication were excluded. The risk of bias was assessed according to the RoB 2 tool, and confidence in cumulative evidence, according to GRADE.

Only 3 articles were included. The average pain assessed using the visual analog scale was lower in the SDF groups than in the short-term control groups (24h to 7 days) (P=0.0134 and P=0.0015) of the two studies. The third study evaluated a combination of SDF and a CO2 laser, compared to using only SDF, and found no statistical difference between the two (P=0.74). Inflammation and gingival staining were also evaluated in two of the three studies. No adverse effects were reported. All the included studies had a high risk of bias, and the certainty of the evidence was very low.

SDF can be used as a safe and effective tooth desensitizer in adults, with good results, as was achieved in a short-term follow-up. However, more studies with longer evaluation periods are required.

 This study assessed the stability of the outcomes after mandibular incisor extraction (MIE) using intercanine width and peer assessment rating (PAR) scores in orthodontic patients.

PubMed, Cochrane Library, Science Direct, Google Scholar, Ovid, and SciELO were systematically searched without restrictions until August 2022. A risk of bias assessment was performed using Newcastle-Ottawa Scale (NOS). The Grading of Recommendations, Assessment, Development, and Evaluation tool was used to assess the quality of evidence. Random effects meta-analysis was performed using RevMan software.

Seven retrospective studies met the inclusion criteria and were included. Meta-analysis identified a statistically significant reduction in intercanine width with MIE after the retention period. The mean difference in post-retention changes concerning intercanine width (MD=0.14, 95% CI: -2.17–1.89; P<0.00001) was significantly higher in premolar extraction (PE) compared to incisor extraction and significantly less in non-extraction compared to incisor extraction (MD=0.72, 95% CI: -0.59–2.03; P<0.00001). Improvements in PAR scores from the start of treatment to the retention period indicated a high outcome standard (>70%) with MIE treatment, with no significant difference in the reduction percentage compared to premolar and non-extraction groups.

 With the existing retrospective studies of limited evidence, treatment outcomes with MIE were found to show good improvements in PAR scores. Some reduction in the intercanine width was evident after the retention period, which was observed even with the other two treatment modalities that were compared. Hence, with careful evaluation, MIE could be considered a valid treatment option.

This systematic review aimed to evaluate the available scientific evidence concerning the effects of topical fluoride treatment on the bond strength of pit and fissure sealants. Prevention of dental caries is one of the crucial issues in pediatric dentistry. Pit and fissure sealant and fluoride therapies are two caries prevention procedures that may be performed in one session. However, fluoride therapy may affect the bond strength of pit and fissure sealants.

 An electronic search for in vitro studies published in English and Persian on topical fluoride therapy and the bond strength of pit and fissure sealants was performed via PubMed/ Medline, Web of Science, Google Scholar, Embase, and Scopus databases until May 2022. The articles were independently reviewed for quality by two reviewers. Textual data were analyzed manually, and the bond strength of sealants placed after fluoride application was compared with control groups.

 A total of 8482 articles were initially identified and reviewed by two independent reviewers, and 13 were selected for full-text evaluation. Finally, six articles were included in the systematic review. A total of 250 teeth were studied, 148 of which were in the case group (fluoride group) and 102 in the control group. Tensile and shear bond strengths were compared between groups in the studies.

  In the studies in which the tooth surfaces were washed after applying fluoride, there was no change in the fissure sealant bond strength. However, in studies in which fluoride was not washed, the bond strength decreased significantly, independent of the fluoride type.

 Considering the limitations of visualization that occur even with the use of radiographs, the cone beam computed tomography (CBCT) becomes more attractive to diagnose and propose an assertive treatment plan. This study aimed to evaluate intra and interobserver reproducibility, and concordance of 31 reference points we described considering visualization tools and the three planes of space in a bimaxillary CBCT.

 Three observers located in triplicate the 31 reference points in the CBCT of six healthy patients. Friedman test was used to compare intraobserver paired samples, and interobserver concordance was determined by the intraclass correlation coefficient (ICC) with ranges>0.75 (excellent), between 0.60 and 0.74 (good), between 0.40 and 0.59 (sufficient) and<0.40 (poor). The P value was set at<0.05.

 A high ICC (>0.75%) was obtained by comparing the x, y, and z values at the location of landmark points. Excellent ICC>0.75 was for 81.7% and poor<0.40 was 7.5% in the interobserver evaluation. Data showed that 25 points had excellent concordance on the x-plane, 25 on the y-plane, and 26 on the z-plane (0.75%).

 Intraobserver concordance analysis indicated that location of anatomical reference points on bimaxillary CBCT is performed with great reproducibility by interpreting their location with a clear description in the three planes of space. Complexity of achieving a good precision degree in the manual marking of reference points caused by convexities of the anatomical structures involved, might explain the variability found. The systematized location of the reference points would contribute to reduce such variability.

 This study aimed to evaluate the efficacy of various filling and retreatment techniques for oval-shaped root canals.

 Sixty distal roots of mandibular molar teeth were included in the study. The roots were prepared using the ProTaper Next (PTN) X4 rotary system and irrigation with 2.5% NaOCl. The roots were then divided into three groups and filled with Total Fill BC Sealer (FKG Dentaire) using three different techniques (n=20): single cone (SC), GuttaCore (GC), and warm vertical condensation (WVC). The retreatment procedure was performed using two different instrumentation techniques: Reciproc 50 (R50) and PTN X5 (n=10). To analyze the remaining filling material, the roots were divided buccolingually in two parts with the help of diamond separators, and photographs were taken at x16 magnification using a dental operating microscope (DOM). The ratio of the remaining filling materials was calculated using image analysis software and statistically evaluated using the Kruskal–Wallis test.

  None of the assessed retreatment procedures completely removed the filling materials from the root canals. For both instrumentation techniques, more root canal filling material remained in the WVC group (P<0.05).

The GC filling technique had a higher cleaning percentage than the WVC and SC techniques in the coronal region. The R50 system was found to be superior to the PTN X5 system for retreatment, and the root canal fillings applied using the WVC technique were more difficult to remove than the fillings applied using the other techniques.

 Indirect restorations have been employed in restorative dentistry to solve some of the drawbacks of direct restorations. The aim of this study was to evaluate the effect of different modes of a universal adhesive resin on the repair capacity of two indirect resin composites and a direct resin composite.

 Indirect composite resins (Ceramage and Gradia Plus) and a direct composite resin (Filtek Z250) were prepared in a plastic mold with a height and diameter of 2-mm and 6-mm, respectively. Composite blocks were thermocycled (5000 cycles, 5°C-55°C). Then, according to their surface treatments, composite blocks were categorized into six-groups: Group 1: ER (etch&rinse), Group 2: SE (self-etch), Group 3: Bur+ER (bur+etch&rinse), Group 4: Bur+SE (bur+self-etch), Group 5: Bur+Silane+ER (bur+silane+etch&rinse), Group 6: Bur+Silane+SE (bur+silane+self-etch), respectively. After surface treatments and adhesive application for bonding with a direct resin composite, all groups were then thermocycled before performing shear-bond-strength-test. Failure modes were evaluated using a stereomicroscope. Data were analyzed by two-way-ANOVA and Bonferroni-test (P<0.05).

The highest bond-strength values were obtained for Bur+Silane+SE groups, while the lowest values were obtained for the Bur+Silane+ER groups for all materials. Statistically significant differences were observed between the Bur+Silane+ER group and ER, Bur+ER and Bur+Silane+SE groups in Gradia Plus (P<0.05).

The self-etch-mode of the universal-adhesive and silane applications led to the increase in the repair-strength of the adhesive in the Filtek Z250 and Ceramage. The self-etch-mode of the universal-adhesive might be used to reduce adhesive-application-steps in the clinical repair procedures.

 Occlusal splints with sensors help in the bruxism diagnosis and monitoring, by recording the patient’s bite force. The aim of this study was to evaluate the accuracy of a pressure sensor when it is covered with different thicknesses of a 3D printing resin (Anycubic 405nm Translucent Green UV Resin, Anycubic, UK).

 In this preliminary study, the evaluated sensor (FlexiForce A201 Sensor, Tekscan) was firstly calibrated without any type of cover material, and later tested with 3D printing resin with different thicknesses (1 mm, 1.15 mm, 1.4 mm and 1.6 mm). The load tests were performed by a force tester (MultiTest 2.5 dV, Mecmesin).

 When the pressure sensor was covered with resin of 1mm and 1.6 mm thick specimens, a higher difference was found between the applied load and the corresponding sensor reading.

  It was concluded that it is possible to use this type of pressure sensor and that it showed better accuracy with the 1.15 mm and 1.4 mm 3D printing resin covering.

 This study evaluated the success and survival rate of sandblasted and acid-etched dental implants according to the patient’s bone quality.

A multicenter retrospective study was conducted in five clinical centers between 2016 and March 2019. A total of 407 implants (KONTACTTM S, Biotech Dental, France) placed in 229 patients (61.5±12.9 years old) were included. Bone quality, classified as types D1 to D4 (Misch classification), maximal insertion torque, and bone loss were measured. The implant survival rate was evaluated after one year for the overall cohort and for each bone quality. The overall survival rate after four years was also estimated with a Kaplan-Meier analysis. Results; After one year (12.8±9.6 months), eight implants were lost out of 407, representing an overall survival rate of 98%. It ranged from 100% for D1 to 89.7% for D4 (n=39), with significantly higher survival rates for D2 (n=93) and D3 (n=165) (98.9% and 98.2%, respectively) compared to D4. According to the Kaplan-Meier analysis, an overall survival rate of 96.5% was estimated after four years. An average maximal insertion torque of 45±12.6 N.cm and bone loss of 0.2±1.2 mm were measured.

 The high overall survival rate (98%), the average maximal insertion torque (45 N.cm), and the low marginal bone loss indicated good clinical results with acid-etched implants. Despite the relatively high survival rate for each bone quality, the significantly lower results in the D4 group highlight the expected benefits of bone quality-based implants and surgical protocols.

 This study aimed to investigate and compare the penetration and durability of two dentin desensitizers, sodium fluoride varnish and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste, using electron microscopy.

 The study was performed on 60 dentin specimens prepared from extracted human premolars. After applying 17% EDTA to remove the smear layer, the specimens were divided into two groups. MI Paste and Bi-fluoride varnish were applied to the specimens. Microscopic images of 20 samples were obtained immediately. Twenty other samples were accessed after 15 days, and the other 20 were accessed after 30 days of toothbrushing and thermal cycling. Both surface and longitudinal cross-sectional images (after sample fracture) were studied. Data were analyzed with two-way ANOVA and Mann-Whitney U test at a significance level of P<0.05.

 The mean depth of material penetration was significantly time-dependent and fluctuated in both groups. There was a significant difference between the mean level of plugs between 0, 15, and 30 days (P<0.001). Penetration increased with time for the MI Paste group, while in the Bi-fluoride group, the increase was significant at 15 and 30 days than immediately after application. The mean thickness of the plugs was significantly different at the three time periods, and MI Paste showed a sudden decrease in plug thickness after 15 days.

  Immediately after application, Bi-fluoride occluded dentinal tubules more effectively, and its durability after abrasion and thermal fatigue were higher than MI Paste.