hossein maleki
-
سبک زندگی به معنای برجسته کردن تمایزهای رفتاری افراد در گروه ها یا جامعه است. وصول عوارض از شهروندان در قبال خدمات، از منابع درآمدی پایدار شهرداری ها محسوب می شود. هدف پژوهش حاضر، مطالعه دلایل عدم تمایل اصناف به پرداخت عوارض شهرداری از دیدگاه کارکنان و اصناف است. تحقیق حاضر به لحاظ هدف، کاربردی و به لحاظ زمانی، مقطعی و از نظر گردآوری داده ها، یک بررسی پیمایشی میدانی است. ابزار گردآوری اطلاعات، پرسش نامه محقق ساخته است که اعتبار آن از طریق اعتبار صوری و توسط متخصصان امر و پایایی آن از آلفای کرونباخ محاسبه و تایید شد. جامعه آماری، کارشناسان شهرداری (37 نفر) با گزینش هدفمند و اصناف مراجعهکننده به شهرداری منطقه 8 (14186 نفر) است که با استفاده از فرمول کوکران، 374 نفر از اصناف به صورت نمونه آماری در دسترس، گزینش شدند. طبق ضریب بتای حاصل از نتایج تحقیق، متغیرهای میزان استفاده از رسانه های جمعی (277/0)، صدور و توزیع فیش عوارض (220/0)، رضایتمندی (172/0)، قدرت بازدارندگی و ضمانت اجرایی(150/0-)، فرهنگ سازی و تبلیغات مناسب رسانه ای (134/0) و قانون گرایی (125/0) بر عدم تمایل اصناف به پرداخت عوارض موثر است. اما تاثیر متغیر اعتماد نهادی بر متغیر وابسته معنی دار نشد. با توجه به نتایج آزمون همبستگی پیرسون، می توان گفت بین عدم تمایل اصناف به پرداخت عوارض و فرهنگ سازی و تبلیغات مناسب رسانه ای، رابطه معنادار و منفی وجود دارد. بدین معنی که با بالا رفتن فرهنگ سازی و تبلیغات مناسب رسانه ای، عدم تمایل اصناف به پرداخت عوارض کمتر می شود.کلید واژگان: سبک زندگی، اصناف، پرداخت عوارض، عوامل سازمانی، شهرداری، کلانشهر تبریزLifestyle highlights behavioral distinctions among individuals within groups or society. Conversely, municipal fee collection from citizens in exchange for services constitutes a stable income source for local governments. This study therefore examines reasons behind guilds' reluctance to pay municipal fees from employee and guild perspectives. The applied, cross-sectional research employed a field survey method. Data were collected using a researcher-designed questionnaire validated through specialists' face validity, with reliability verified by Cronbach's alpha. The statistical population comprised municipal experts (37 purposively sampled) and District 8 guild members (14,186). Cochran's formula determined an accessible sample of 374 guilds. Beta coefficients identified significant predictors of payment reluctance: media use (β = -0.277), fee bill issuance/distribution (β = -0.220), satisfaction (β = -0.172), deterrent enforcement (β = -0.150), effective media culture/advertising (β = -0.134), and legal adherence (β = -0.125). Institutional trust showed no significant impact. Pearson correlation revealed a significant negative relationship between payment reluctance and effective media culture/advertising (p<0.05), indicating reduced reluctance with improved media outreach.Keywords: Businesses, Fees, Internal Factors, External Factors, Municipality, Tabriz Metropolis
-
در این مطالعه با افزودن مقادیر مختلف نانو پودر اکسید آلومینیوم به رزین و تولید نمونه های نانوکامپوزیت رزین/آلومینا با استفاده از فرایند پردازش نور دیجیتال (DLP)، تاثیر محتوای مختلف نانو پودر روی خواص مکانیکی نمونه ها ازجمله استحکام کششی و مقاومت به سایش بررسی شد. سپس مورفولوژی سطوح کشش و سایش نانوکامپوزیت رزین/آلومینا تولیدشده بررسی گردید. با افزایش محتوای آلومینا تا 2 درصد وزنی استحکام کششی به علت اجتماع نانو پودر و ایجاد نقاط تمرکز تنش و شروع شکست، کاهش یافت. ادامه افزایش مقدار ذرات تقویت کننده، سبب پدیده انحراف ترک شد و استحکام کششی بهبود یافت؛ به طوری که در نهایت با 8 درصد وزنی آلومینا استحکام کششی نزدیک به 16 درصد نسبت به نمونه رزین خالص افزایش یافت. کمترین استحکام کششی نانوکامپوزیت آلومینا در نمونه 1.5 درصد وزنی آلومینا مشاهده شد. علاوه بر این، با افزایش درصد وزنی آلومینا در نانوکامپوزیت، ابتدا نیروی ضعیف فصل مشترک بین رزین و نانو پودر، منجر به کاهش مقاومت به سایش شد و سپس با افزایش محتوای تقویت کننده، بهبود یافت. نهایتا در 8 درصد وزنی، نرخ سایش ویژه نزدیک به 62 درصد نسبت به نمونه رزین خالص کاهش یافت.کلید واژگان: پردازش نور دیجیتال، شکل ظاهری، نانوکامپوزیت آلومینا، خواص مکانیکی، رزینIn this study, by adding different amounts of aluminum oxide nano powder to the resin and producing resin / alumina nanocomposite samples using digital light processing (DLP), the effect of different nano powder content on the mechanical properties of the samples, including tensile strength and wear resistance, was investigated. Then, the morphology of the tensile and wear surfaces of the produced resin / alumina nanocomposite was investigated. By increasing the alumina content up to 2% by weight, the tensile strength decreased due to the clustering of nano powders and the creation of stress concentration points and the initiation of failure. Continuing to increase the amount of reinforcing particles caused the phenomenon of crack deviation and the tensile strength improved, so that finally with 8 wt% alumina, the tensile strength increased by nearly 16% compared to the pure resin sample. The lowest tensile strength of alumina nanocomposite was observed in the sample of 1.5% by weight of alumina. In addition, with an increase in the weight percentage of alumina in the nanocomposite, firstly, the weak force of the interface between the resin and the nano powder led to a decrease in wear resistance, and then it improved with the increase of the reinforcing content. finally, at 8 wt%, the specific wear rate was close to It decreased to 62% compared to the pure resin sample.Keywords: Digital Light Processing, Appearance, Alumina Nanocomposite, Mechanical Properties, Resin
-
در این پژوهش آزمایش و اندازه گیری حجم سوخت نازل های سوخت دوگانه سوز توربین GE-F9 با استفاده از انجام آزمایش های تجربی توسط دستگاه ردیف چینی نازل سوخت گازی (طراحی و ساخته شده در شرکت پرداد کامه صنعت) مورد بررسی قرار گرفتند. در ادامه، جهت نصب نازل ها بر روی توربین از الگو فرایند معینی به منظور ردیف چینی آن ها توسط نرم افزار ویژه دستگاه استفاده شد. اختلاف دمایی به عنوان یکی از مهم ترین متغیرهای خروجی تحقیق مورد ارزیابی قرار گرفت. نتایج به دست آمده از این مطالعه نشان داد که کاهش اختلاف جریان گاز مصرفی تا 2% و اختلاف دمایی تا 20 درجه سانتی گراد با انتخاب یک دسته 14 عددی از میان 30 نازل اولیه و همچنین ردیف چینی مناسب توسط نرم افزار امکان پذیر است. همچنین از طرفی در صورت استفاده از 2 دسته نازل از میان 30 نازل اولیه، می توان اختلاف جریان نازل ها را تا 6 و 9% کاهش داد و در عوض با استفاده از نرم افزار ردیف چینی اختلاف دمایی را زیر 28 درجه سانتی گراد حفظ نمود.کلید واژگان: توربین گازی، GE-F9، سوخت رسانی متوازن، ردیف چینی نازل، اختلاف دماییIn this research, fuel nozzles of GE-F9 turbine were tested, and fuel flow was measured using a Nozzle Layout device, which was designed and manufactured by Pardad Kameh Sanat Company. Then, the layout of nozzles was suggested by the special software of the device based on a specific algorithm, and it was installed on the turbine. The temperature spread was evaluated as the most important result of this research. The results show that by selecting a set of 14 out of the 30 initially provided nozzles and then using the layout recommended by the software, it is possible to reduce the gas flow difference by 2% and the temperature spread by 20 ℃. However, using two sets of nozzles out of the 30 provided can reduce the flow difference of the nozzles to 6% and 9%, respectively. In addition, with the help of the Nozzle Layout software, the temperature spread can be maintained below 28 ℃.Keywords: Gas Turbine, GE-F9, Fuel Flow Balancing, Nozzle Layout, Temperature Spread
-
اثر درصد وزنی آلومینا بر خواص مکانیکی نانو کامپوزیت تولید شده به روش ساخت افزایشی پردازش نور دیجیتالدر این مطالعه تولید نمونه های نانوکامپوزیتی با استفاده از فرایند پردازش نور دیجیتال (DLP) مورد بررسی قرار گرفت. ابتدا تاثیر ضخامت لایه چاپ در سه مقدار 50، 75 و 100 میکرومتر روی خواص کششی نمونه های رزینی خالص و کامپوزیتی و نیز مدت زمان چاپ بررسی شد. در ادامه با افزودن مقادیر مختلف نانو پودر آلومینیوم اکسید با اندازه ی ذرات nm 50 به رزین، تاثیر درصدهای مختلف نانو پودر روی خواص مکانیکی نمونه ها ازجمله استحکام کششی و مقاومت به سایش بررسی شد. نتایج نشان داد که نمونه های با ضخامت لایه کمتر استحکام بهتری نسبت به نمونه های با ضخامت لایه بیشتر دارند. با کاهش ضخامت لایه از 100 به 75 و 50 میکرومتر استحکام کششی در نمونه های خالص به ترتیب 4 و 55/8% افزایش می یابد. همچنین با افزایش آلومینا تا 2 درصد وزنی استحکام کششی ابتدا کاهش و سپس با ادامه افزایش مقدار ذرات تقویت کننده، استحکام کششی بهبود می یابد، به طوری که در نهایت با 8 درصد وزنی آلومینا استحکام کششی نزدیک به 16% نسبت به نمونه رزین خالص افزایش نشان می دهد. علاوه بر این، با افزایش درصد وزنی آلومینا در نانوکامپوزیت، مقاومت به سایش ابتدا تضعیف و سپس بهبود می یابد و در نهایت (همانند استحکام کششی) در 8 درصد وزنی ذرات تقویت کننده، نرخ سایش ویژه نزدیک به 67% نسبت به نمونه رزین خالص کاهش می یابد.کلید واژگان: پردازش نور دیجیتال، رزین استاندارد، نانوکامپوزیت، آلومینا، خواص مکانیکیIn this study, the production of nanocomposite samples was investigated using digital light processing (DLP). First, the effect of the thickness of the printing layer in three values of 50, 75, and 100 micrometers on the tensile properties of neat and composite resin samples as well as the printing time was investigated. Next, by adding different amounts of aluminum oxide nanopowder with a particle size of 50 nm to the resin, the effect of different percentages of nanopowder on the mechanical properties of the samples, including tensile strength and wear resistance, was investigated. The results showed that samples with less layer thickness have better strength than samples with more layer thickness. By reducing the thickness of the layer from 100 to 75 and 50 micrometers, the tensile strength in neat samples increases by 4 and 8.55%, respectively. Also, with the increase of alumina up to 2% by weight, the tensile strength first decreases, and then with the continued increase in the number of reinforcing particles, the tensile strength improves, so that finally, with 8% by weight of alumina, the tensile strength shows an increase of nearly 16% compared to the neat resin sample. . In addition, with the increase in the weight percentage of alumina in the nanocomposite, the wear resistance first weakens and then improves, and finally (similar to the tensile strength) at 8 weight percent of reinforcing particles, the specific wear rate decreases by nearly 67% compared to the neat resin sample.Keywords: Digital Light Processing, standard resin, Nanocomposite, Aluminum, Mechanical properties
-
مقدمه
همراهی در رفتگی مفصل آتلانتواکسیال و شکستگی زائده ادنتوئید ،یک آسیب نادر و جدی ستون فقرات است که باعث ایجاد بی ثباتی می شود .فراوانی تخمین زده شده برای این آسیب ترکیبی در میان آسیب های ستون فقرات گردنی فوقانی کمتر از 2 درصد است .موارد بالینی کمی از این نوع آسیب در منابع علمی گزارش شده است . در این مقاله، پیش آگهی یک بیمار با در رفتگی مفصل آتلانتو اکسیال و شکستگی زائده ادنتوئید و نحوه مدیریت این نوع آسیب ترکیبی را، ارائه می کنیم.
گزارش مورد :
یک مرد 19 ساله به دنبال تصادف با وسیله نقلیه موتوری دچار شکستگی محور 2 C در زائده ادنتوئید و جا به جایی مهره اطلس (1 (C نسبت به 2C به سمت خلف شده بود.در این بیمار، جابه جایی خلفی با در رفتگی دو طرفه مفاصل جانبی مشاهده میشد.درمان محافظه کارانه شامل کشش محوری با بریس سر halo برای کاهش در رفتگی آتلانتواکسیال انجام شد ولی موفقیت آمیز نبود. تصمیم به انجام عمل جراحی برای کاهش در رفتگی و ثابت کردن مفصل 2C1-C گرفته شد.عکسبرداری بعد از عمل جراحی رضایت بخش بود.در طول 6 ماه پیگیری، تصاویر بالینی بیمار ثابت و بیمار فاقد مشکل عملکردی ماژور بود .اشعه ایکس داینامیک، دامنه حرکت خوبی را در خم شدن و اکستنشن نشان داد.
بحث/ نتیجه گیریهمراهی در رفتگی مفصل آتلانتواکسیال و شکستگی زائده ادنتوئید، یک آسیب نادر ستون فقرات است که به دلیل ایجاد بی ثباتی ، جدی تلقی می شود. ابتدا اقدام به درمان در رفتگی می کنیم و سپس درمان شکستگی زائده ادنتوئید بر اساس نتایج جا اندازی و پایداری آن تعیین می شود. درمان محافظه کارانه در رفتگی شامل کشش محوری با بریس سر halo است .درصورت شکست درمان محافظه کارانه باید یک جا اندازی باز از طریق روش خلفی با فیکساسیون C1-C2 نوع Magerl انجام شود. اگر این روش امکان پذیر نباشد، فیکساسیون اکسیپیتوسرویکال انجام می شود. این نوع فیکسیشن به ندرت استفاده می شود اما به دلیل قرار گیری عالی مفصل آتلانتواکسیال درآن و امکان انجام فیوژن ترانس آرتیکولار قدامی در این روش، دارای مزیت است.
کلید واژگان: شکستگی ادنتویید، دررفتگی چرخشی آتلنتوآگزیال، پایدارسازی اکسیپیتوسرویکالBackgroundThe combination of atlantoaxial joint dislocation and fracture of the odontoid process is a rare but serious spine injury that causes instability. The estimated frequency of this combined injury is less than 2% among upper cervical spine dameges. Few clinical cases of mentioned damage has been reported in scientific resources. In this article, we present the prognosis of a patient with atlantoaxial joint dislocation along with odontoid fracture and discuss how to manage this type of combined injury.
Case presentationA 19-year-old man presents with a fracture of the C2 axis in the odontoid process and posterior displacement of the atlas vertebra (C1) relative to C2 due to motor vehicle accident. posterior displacement was observed with bilateral dislocation of the lateral joints. Conservative treatment consisted axial traction with a halo head brace was performed to reduce the atlantoaxial dislocation. Because traction failed, we decided to perform surgery to reduce the dislocation and fix the C1-C2 joint.postoperative X-ray and CT scan were satisfactory. At the 6 months follow-up, the clinical picture was stable and the patient had no major functional problems. Dynamic X-ray Showed good range of motion in flexion and extension.
ConclusionThe combination of atlantoaxial joint dislocation and fracture of the odontoid process is a rare spine injury that is considered serious due to causing instability. First, we treat the dislocation, then the treatment of the fracture of the odontoid appendage is determined based on the results of displacement and its stability. Conservative treatment of dislocation includes axial traction with a halo head brace. If traction fails, an open reduction should be performed through the posterior approach with C1-C2 Magerl fixation. If this approach is not possible, occipitocervical fixation is performed. The rarely-used lateral approach has an advantage in this indication, because the atlantoaxial joint exposure is excellent and the option exists to perform anterior transarticular fusion.
Keywords: Odontoid fracture, Atlantoaxial rotational dislocation, Occipitocervical stabilization -
مجله تحقیقات حقوقی، پیاپی 100 (زمستان 1401)، صص 219 -244
اینترنت اشیاء به عنوان یک فناوری جدید، نقش تحول آمیز فناوری های دیجیتال را سرعت داده و استفاده مصرف کنندگان از دستگاه های اینترنت اشیا هر ساله به طور قابل توجهی در حال افزایش است با این حال رشد کاربرد این فناوری، باعث ایجاد سوالاتی در مورد تخصیص مسیولیت در رابطه با خطرات مرتبط با این محصولات می گردد و استفاده از این فناوری ممکن است سبب بروزمشکلات و خساراتی گردد که یکی از این مسایل زیانهایی است که به اشخاص و اموال واردمی شوند و یکی از مهمترین اهداف این است که زیان را به چه شخصی می توان منتسب نمود و وجه مسیولیت چیست؟ مقاله حاضر با روش تحلیلی - توصیفی در تلاش است که با بیان نظریات موجود مبنای مسیولیت با لحاظ وضعیت کنونی و آخرین تحولات در این زمینه، قواعد مبنای مسیولیت مدنی ناشی از تولید محصول را مطالعه کرده به گونه ای که گروه سازندگان دستگاه های iot به دلیل تولید محصول معیوب و موجد خسارت، دارای مسیولیت خواهند بود که مبنای مسیولیت سازندگان دستگاه های اینترنت اشیاء عموما براساس نظریه مسیولیت محصول خواهد بود و نظریه مسیولیت سختگیرانه در مورد کاربران تجاری با ریسک بالا مانند بخش های پزشکی قابل اعمال و نظریه مسیولیت سهل انگاری برای کاربران غیر تجاری مناسب بوده و نظریه مسیولیت نقض ضمانتنامه بین سازندگان دستگاه های اینترنت اشیا و خریداران و کاربران آنها قابل اعمال می باشد.و این موضوع به دلیل تازگی و به دلیل کاربردهای متنوع آن، اهمیتی مضاعف پیدا کرده و با وجود احساس خلاء در قوانین داخلی، تبیین این موضوع ضرورتی انکار ناپذیر است.
کلید واژگان: اینترنت اشیا، مسئولیت مدنی، خسارت، عیب تولید، محصولAs a new technology, the Internet of Things has accelerated the transformative role of digital technologies, and the use of Internet of Things devices by consumers is increasing significantly every year. The relationship between the risks associated with these products and the use of this technology may cause problems and damage. One of these issues is the damage that is caused to people and property, and one of the most important goals is to determine which person can be attributed for the damage. And what is the responsibility? The present article, with the analytical-descriptive method, is trying to study the basic rules of civil liability due to product production by stating the existing theories of the basis of responsibility in terms of the current situation and the latest developments in this field, in such a way that the group of manufacturers of IoT devices due to production The defective and damaging product will have liability, the basis of liability of IoT device manufacturers will generally be based on the product liability theory, and the strict liability theory applies to high-risk commercial users such as the medical sector, and the negligence liability theory is suitable for non-commercial users. And the theory of responsibility for breach of warranty can be applied between the manufacturers of Internet of Things devices and their buyers and users. And this issue has gained double importance due to its novelty and various applications, and despite the feeling of emptiness in domestic laws, the clarification of this issue is an undeniable necessity.
Keywords: IoT, Civil Liability, damages, manufacturing defect, Product -
اجرای پروژه های تونل سازی به دلیل محدود بودن محیط کار، در زمان نسبتا طولانی انجام می شود. در این حالت مدیریت پروژه و بهینه سازی مراحل اجرا از اهمیت زیادی برخوردار است. برای کنترل ومدیریت پروژه می توان از روش های مختلف استفاده کرد. روش های شبکه ای ازجمله روش های کارا می باشد. روش مسیر بحرانی وپرت پرکاربرد ترین ومرسوم ترین آن ها است. روش گرت نیز از جمله روش های شبکه ای است که کارایی بالایی داشته و می تواند برای حالتی که علاوه بر زمان احتمالی، فعالیت های احتمالی نیز وجود داشته باشد، به کار رود. در تونل سازی به دلیل پیچیدگی عملیاتی و همچنین ناشناخته بودن شرایط زمین شناسی، علاوه بر غیر قطعی بودن زمان برخی فعالیت ها، لزوما تمام فعالیت ها قطعی نبوده و بسته به شرایط درهر پروژه، برخی فعالیت ها انجام نخواهند شد. ازاین رو دراین تحقیق کاربرد روش گرت درتونل سازی بررسی شده و مثالی برای کاربرد آن نشان داده شده است. در این مثال ابتدا عملیات مختلف تونل سازی برای پروژه احداث یک تونل بزرگ مقطع مشخص شده است. سپس بر اساس نوع هر فعالیت، احتمال انجام وهمچنین بازه ی زمانی اجرا تعریف شده است. با توجه به شرایط فنی وعملیاتی، ارتباط بین فعالیت ها بر اساس شبکه گرت نشان داده شد. روش تحلیل شبکه به دو صورت دستی و نرم افزاری بیان گردید. به کمک نرم افزار پریماورا مثال عددی اجرا گردید و به ازای درصد احتمال های مختلف برای پروژه، زمان های اتمام مختلفی بدست آمد. همچنین بالعکس برای زمان های پیش بینی شده مختلف نیز می توان زمان های احتمال مربوطه را تعیین کرد. به عنوان مثال زمان اجرای پروژه 2981روزبا احتمال 50%و3082روزبا احتمال 80% امکان پذیر است.کلید واژگان: تونل سازی، مدیریت وکنترل پروژه، روش گرت، Risk Analysis PrimaveraTunneling projects are implemented over a relatively long time due to the limited work environment. In this case, project management and implementation optimization are very important. Various methods can be used to control and manage the project. Network methods are one of the effective methods. . The CPM and PERT methods are the most commonly used. The GERT method is also one of the most efficient networking methods and can be used for situations where there are potential activities in addition to time. Due to the complexity of the operation and also the unknown geological conditions in the tunneling, in addition to the uncertain timing of some activities, not all activities are necessarily definitive and some activities will not be performed depending on the conditions in each project. Therefore, in this study the used of GERT method in tunneling has been investigated and an example is shown for its used. In this example, first different tunneling operations are outlined for the project of constructing a large cross-section tunnel. Then, according to the type of each activity, the likelihood of execution and the time interval of execution are defined. Due to the technical and operational conditions, the relationship between activities based on the GERT network was shown. The method of network analysis was expressed in both manual and software. A numerical example was implemented using Risk Analysis Primavera software and different completion times were obtained for different project percentages. Conversely, the corresponding probability times can also be set for different predicted times. The project execution time is 2981 days with 50% probability and 3082 days with 80% probability.Keywords: tunneling, Project, Management, GERT Method, Risk Analysis Primavera
-
Background and Purpose
After a childhood and following human beings to adolescence, changes have been achieved in him (or her), including the tendency of individuals to gain independence. The aim of this study was to investigate the relationship between metacognitive strategies and attachment styles with the sense of school belonging in high school students in Zahedan.
MethodThe present study was a correlational study; The statistical population of the present study was all high school students in Zahedan, and the sample consisted of 370 people who were selected by simple cluster-random sampling. The questionnaires that were considered to collect information from the sample group were: Barry et al.'s Feeling of Belonging Questionnaire (2004), O'Neill and Abedi Metacognitive State Questionnaire (1996), and Collins and Reid Attachment Questionnaire (1991). For the statistical analysis of data, the Pearson correlation coefficient and structural equation model (SEM) were used using Amos.22 and SPSS.22 software.
ResultsResults showed that metacognitive awareness (β=0.31, p <0.001), cognitive strategy (β=0.24, p=0.045), planning (β=0.23, p=0.003) and self-review (β=0.28, p <0.001) had positive effect on school belonging. Secure attachment style (β=0.17, p=0.021) has positive effect on school belonging. Avoidance attachment style (β=-0.27, p <0.001) and ambivalent attachment style (β=-0.23, p=0.003) had negative effect on school belonging.
ConclusionIt can be concluded that metacognitive strategies components have a positive and direct effect on school belonging to school belonging. A secure attachment style has a positive effect on school belonging. Avoidance attachment style and ambivalent attachment style had a negative effect on school belonging.
Keywords: schools, metacognition, Students -
هدف
کیفیت رابطه به عنوان کلیدی ترین مفهوم روابط خریداران و تامین کنندگان در زنجیره تامین، شناخته می شود. هدف این تحقیق، بررسی و تجزیه و تحلیل کیفیت رابطه خریداران و تامین کنندگان و اولویت بندی مولفه ها آن می باشد.
روشبا استفاده از رویکرد فراترکیب، تحقیقات موجود در حوزه کیفیت رابطه خریداران و تامین کنندگان از سال 1998 تا بهار 2020 میلادی، با استفاده واژگان جست وجو مربوطه، جمع آوری شد. سپس با توجه به عنوان، معیارها ورودی، چکیده، معیارها خروجی و برنامه مهارت ها ارزیابی حیاتی، مقالات نامرتبط حذف و مقالات نهایی انتخاب شدند. با کدگذاری و ترکیب یافته ها مقالات منتخب در نرم افزار مکس کیودی، عناصر و مقوله ها کلیدی کیفیت رابطه شناسایی شدند و در نهایت با به کارگیری فرایند تحلیل سلسله مراتبی، مقوله ها کیفیت رابطه از طریق جمع آوری نظرات خبرگان صنعت و دانشگاه و با استفاده از نرم افزار اکسپرت چویس، بر اساس اهمیت اولویت بندی شدند.
یافته هابر اساس یافته ها پژوهش، کیفیت رابطه خریداران و تامین کنندگان از سه بعد اجتماعی، فنی و رابطه ای تشکیل شده است. بعد اجتماعی، شامل اعتماد، تعهد و رضایت می باشد. بعد فنی از همکاری، مدیریت دانش و انطباق تشکیل شده است و بعد رابطه ای در برگیرنده تعامل و ماهیت رابطه می باشد.
نتیجه گیرینتایج پژوهش نشان می دهد که اعتماد مهم ترین مقوله کیفیت رابطه می باشد و پس از آن به ترتیب، همکاری، تعامل، تعهد، رضایت، مدیریت دانش، انطباق و ماهیت رابطه از مهم ترین مولفه ها کیفیت رابطه شناخته می شوند و طرفین رابطه برای بهبود کیفیت رابطه خود و به دست آوردن مزایا آن، می بایست بر روی تقویت و ارتقا مولفه ها ذکر شده، تمرکز کنند.
کلید واژگان: کیفیت رابطه خریداران و تامین کنندگان، زنجیره تامین، فراترکیب، فرایند تحلیل سلسله مراتبیObjectiveRelationship quality is recognized as the key concept of buyer-supplier relationships in the supply chain. The purpose of this study is to review and analyze the buyer-supplier relationship quality and prioritize its components.
MethodsUsing a Meta-Synthesis Method, existing research on the buyer-supplier relationship quality from 1998 to the spring of 2020 was collected using relevant search terms. Then, due to the title, inclusion criteria, abstract, exclusion criteria and critical appraisal skills program checklist, irrelevant articles were removed and final articles were selected. By coding and synthesizing the findings of selected articles in MAXQDA, key components and categories of relationship quality were identified. Finally, by using an analytic hierarchy process, the components of relationship quality were prioritized by gathering the opinions of industry and academic experts and using Expert Choice software.
ResultsAccording to the research findings, the buyer-supplier relationship quality consists of three dimensions: social, technical and relational. The social dimension includes trust, commitment and satisfaction. The technical dimension consists of cooperation, knowledge management and adaptation, and the relational dimension includes interaction and the nature of the relationship.
ConclusionThe results show that trust is the most important component of relationship quality and then, respectively, cooperation, interaction, commitment, satisfaction, knowledge management, adaptation and the nature of the relationship are recognized as the most important components of relationship quality. In order to improve the quality of their relationship and get its benefits, the parties to the relationship should focus on strengthening and upgrading the mentioned components.
Keywords: Buyer-supplier relationship quality, Supply Chain, Meta-synthesis, Analytic Hierarchy Process -
نشریه رج شمار، پیاپی 2 (پاییز و زمستان 1399)، صص 159 -180
هدف این تحقیق، بررسی وضعیت تجاری سازی فرش دستباف ایران می باشد. با استفاده از روش موردکاوی، شعبه بیرجند شرکت سهامی فرش ایران، به عنوان مورد مطالعاتی پژوهش انتخاب گردید. از طریق مصاحبه ها نیمه ساختاریافته و پرسشنامه، داده ها مربوط به وضعیت کسب وکار و تجاری سازی شرکت، از کارشناسان فروش و تولید آن جمع آوری گردید. داده ها تحقیق با کدگذاری پیشرفته در نرم افزار مکس کیودا، تجزیه و تحلیل شدند. در این پژوهش، یافته ها مربوط به وضعیت کسب وکار شرکت در یک جدول و شرایط تجاری سازی محصولات شرکت در قالب یک مدل، ارایه گردید. برای ارزیابی فرایند تجاری سازی نیز، از سه مفهوم، سطح آمادگی فناوری، سطح آمادگی بازار و سطح آمادگی تجاری سازی استفاده شد. نتایج پژوهش نشان می دهد که شعبه بیرجند شرکت سهامی فرش ایران در ایده پردازی، طراحی محصول، ساخت و تولید انبوه فرش دستباف در وضعیت مناسبی قرار دارد، اما در ارتباط با بازارسنجی، بازاریابی، رقابت در بازار و فروش محصولات نقاط ضعف متعددی دارد. همچنین سطح آمادگی فناوری شرکت، قابل قبول ارزیابی شد؛ اما سطوح آمادگی تجاری سازی و بازار شرکت، وضعیت نامطلوبی داشتند که در انتها پژوهش ، راهکارهایی به منظور بهبود وضعیت شرکت ارایه گردید.
کلید واژگان: تجاری سازی، فرش دستباف، بازاریابی، شرکت سهامی فرش ایرانRajshomar Journal, Volume:1 Issue: 2, 2021, PP 159 -180The purpose of this study is to investigate the commercialization of Persian handmade carpet. Using case study methodology, Birjand branch of Iran Carpet Company was selected as the case of study. Through semi-structured interviews and questionnaires, data on business status and commercialization were collected from the company's sales and production experts. The research data were analyzed with advanced coding in MAXQDA software. In this study, the findings related to the business situation of the company were presented in a table and the commercialization conditions of the company's products in the form of a model. To evaluate the commercialization process, three concepts were used: technology readiness level, market readiness level and commercialization readiness level. The results show that the Birjand branch of Iran Carpet Company is in a good position in idea generation, product design, manufacturing and mass production of handmade carpets, but has several weaknesses in relation to marketing, market research, market competition and product sales. In addition, the technology readiness level of the company was considered acceptable; However, the levels of commercialization and market readiness of the company were in an unfavorable situation, and at the end of the research, solutions were presented to improve the company's situation.
Keywords: Commercialization, Handmade carpet, Marketing, Iran Carpet Company -
باکتری E.coli O157:H7 یک پاتوژن مهم انسان و حیوان است که در انسان موجب بروز اسهال خونریزی دهنده و سندرم اورمی همولتیک (HUS) می شود. اتصال به سلول های میزبان اولین گام در تثبیت این باکتری است که به واسطه سیستم ترشحی نوع III (T3SS) و از طریق میانکش بین پروتئین های ترشحی صورت می گیرد. در این میان EspA به عنوان جزء اصلی تشکیل دهنده سیستم ترشحی است و ارتباط تنگاتنگی با اتصال اولیه باکتری به سلول میزبان و تشکیل بیوفیلم باکتریایی دارد. EspA به سبب ساختار خود و قرارگرفتن در غشاء باکتری، یک ایمنی زای قوی می باشد. Tirنیز پروتئینی است که پس از بیان در باکتری و از طریق T3SS به سلول میزبان منتقل و در غشاء آن مستقر می شود و نقش مهمی در اتصال باکتری به میزبان دارد. هدف از این تحقیق ساخت سازه ژنی که دارای فاکتورهای فوق الذکر (EspA-Tir) بوده و انتقال آن به درون گیاه هدف می باشد. در راستای ساخت واکسن خوراکی کارا بر علیه باکتری اشریشیا کلی O157:H7. پس از بررسی های بیوانفورماتیکی سازه ژنی دو قسمتی و espA-tir توسط رابط جداکننده پپتیدی به یکدیگر متصل و ژن آن ها به طور مصنوعی ساخته شد. پس از بهینه سازی کدون ها براساس گیاه تنباکو، تحت کنترل پروموتر CaMV35S در ناقل بیانی گیاه کلون گردید. سپس تراریختی و باز زایی گیاه تنباکو با آن انجام گرفت. آنالیز های انجام شده مشخص کرد که ژن های مربوطه در گیاه موردنظر وارد و بیان می گرددکلید واژگان: واکسن خوراکی، اشریشیا کلی O157:H7، EspA، TirE. coli O157: H7 is an important zoonotic pathogen that causing severe gastrointestinal disease such as hemorrhagic diarrhea and hemolytic uremic syndrome. The first step of bacterial pathogenicity is، attaching to the host cell. EspA is a protein molecule and forms as filamentous structure that is transiently expressed on the outer membrane surface and interacts with the host cell during the early stage adhesion and forms bacterial biofilm، this filamentous structure make it a strong immunogenic. Tir is bacterial protein that translocated to host cell after expression in the bacteria by type III secretion system (T3SS) and integrated in to host cell membrane. Intimin can attach to the host cell by conducting to Tir. The purpose of this study is constructing bivalent gen which contains virulence factor mention before and transferring in to target plant in order to production edible vaccine against E. coli O157: H7. After bioinformatics investigation the two bivalent gen construction (espA-Tir،) were attached by peptide linker، and the gens were constructed. After codon optimization based on tobacco; construction were cloned in expression vector which contains CaMV35s promoter. After transformation and regeneration، the expressions of transgenes were showed in analysis.Keywords: Edible vaccine, E.coli O157:H7, Tir, EspA
-
کارآفرینی یکی از حوزه های نوظهور و امید بخش در دهه های اخیر بوده است. شناسایی علت ها و پیامدهای تلاش های کارآفرینانه در این راستا اهمیت بسیاری پیدا کرده است. هدف از انجام این پژوهش بررسی تاثیر باورهای مذهبی بر راه اندازی یک کسب وکار جدید است. بدین منظور با استفاده از روش تحقیق آمیخته، که شامل پرسشنامه و مصاحبه است، از دانشجویانی که در مراکز رشد دانشگاه های تهران، شریف و شهید بهشتی اقدام به راه اندازی شرکت کرده بودند، آزمون به عمل آمد. نتیجه ی اولیه ی به دست آمده، نشان دهنده ی تاثیر نداشتن این باورها بر راه اندازی کسب وکار بودند. پاسخ دهندگان از وجود یک نظام درونی ارزشی قوی صحبت می کردند که به حفظ و تقویت آن گرایش داشتند و در تلاش بودند تا تقید و پایبندی خود را به اصول مذهبی نشان دهند. یافته ها نشان می دهند که تاثیر نداشتن باورهای مذهبی بر راه اندازی کسب وکار به دلیل وجود متغیرهای میانجی است که باعث می شوند تا باورها به صورت غیرمستقیم بر راه اندازی کسب وکار تاثیر بگذارند. مطالعات در غرب نیز حاکی از آن است که باورهای مذهبی بر راه اندازی کسب وکار تاثیری ندارند. از سویی در قرآن و احادیث اسلامی نیز درباره ی موضوع های اقتصادی و کارآفرینی، نشانه های زیادی وجود دارد که نشان دهنده ی تمایل و توجه زیاد اسلام به کارآفرینی است.
کلید واژگان: کارآفرینی، مذهب، باور، اخلاق اسلامیEntrepreneurship is an emergent field in the recent decades which has been accompanied by very important efforts towards recognition of the grounds for its development. This research is conducted through a mixed method of questionnaire and interviews. The target group consists of students from the University of Tehran, and Shahid Beheshti as well as the Sharif University of Technology who have managed to start up businesses. The respondents believe in a strong inherent value system while they are trying to reinforce it and showing their adherence to religious principles. The findings indicate that owing to some intermediary variables, religious beliefs can indirectly impact the business venture. On the other hand, most of the Islamic teachings and Qoranic traditions which address economic issues largely evidence the religious tendency and association with entrepreneurship and new business startups.Keywords: Entrepreneurship, Religion, Belief, Islamic, Ethics
- در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو میشود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشتههای مختلف باشد.
- همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته میتوانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
- در صورتی که میخواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.