به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
فهرست مطالب نویسنده:

s. sheikhzadeh

  • ماهان فاتح زنوزی، منوچهر رحمتی کامل، صدیقه شیخ زاده، ولی الله آرش*، ثریا خفری
    سابقه و هدف

    ترکیبات فلوراید به صورت گسترده در کنترل پلاک دندان ها استفاده می شود. با توجه به تاثیر ترکیبات مختلف فلوراید بر خصوصیات مکانیکی سیم های اتودنسی، هدف از این مطالعه بررسی تاثیر روش های مختلف تجویز فلوراید با غلظت های متفاوت بر خصوصیات نیرو-خمش سیم های Rhodium-coated NiTi می باشد.

    مواد و روش ها

    این مطالعه کارآزمایی بالینی روی 30 بیمار 15 تا 25 ساله که به دلیل نامرتبی دندانی به دانشکده دندانپزشکی بابل مراجعه کردند و فاقد ناهنجاری های اسکلتی عمودی بودند، انجام شد. سیم 0/016  اینچ Rhodium-coated A-NiTi به براکت های فک بالای بیماران بسته شد. بیماران به صورت تصادفی به سه گروه ده نفری تقسیم شدند. گروه کنترل فقط از خمیر دندان فلوراید دار، گروه دوم از خمیر دندان فلوراید دار به همراه دهانشویه سدیم فلوراید (0/05%) و گروه سوم از خمیر دندان فلوراید دار به همراه ژل Acidulated Phosphate Fluoride (APF-1/23%) استفاده کردند. پس از شش هفته مقادیر نیروی Unloading (نیوتن)، Yield strength (نیوتن بر متر مربع) و stiffness (نیوتن بر متر) سیم ها با استفاده از آزمون خمش سه نقطه ای به دست آمد.

    یافته ها

    میانگین نیروی Unloading و stiffness سیم در گروه دوم بیشتر از سایر گروه ها و در گروه اول بیشتر از گروه شاهد در تمامی جابجایی ها بود، اما تفاوت معنی داری بین گروه ها مشاهده نشد. بین Yield strength گروه های مختلف اختلاف معنی داری وجود داشت (0/038=p). میانگین Yield strength در گروه دوم بیشتر از سایر گروه ها بود (0/16±0/94 نیوتن بر متر مربع) و با میانگین Yield strength در گروه شاهد (0/19±0/75 نیوتن بر متر مربع) اختلاف معنی داری داشت (0/030=p).

    نتیجه گیری

     به نظر می رسد تجویز فلوراید بر نیروی Unloading و stiffness سیم های ارتودنسی Rhodium-coated NiTi تاثیری ندارد اما با افزایش غلظت فلوراید، Yield strength افزایش می یابد.

    کلید واژگان: سیم های ارتودنسی، تست های مکانیکی، سدیم فلوراید
    M .Fateh Zonouzi, M. Rahmati Kamel, S. Sheikhzadeh, VA. Arash*, S. Khafri
    Background and Objective

    Fluoride compounds are widely used for the control of dental plaque. Considering the effect of different fluoride compounds on the mechanical properties of orthodontic wires, this study was conducted to analyze the effect of different methods of fluoride administration at different concentrations on the load-deflection properties of rhodium-coated NiTi orthodontic archwires.

    Methods

    This clinical trial was conducted on 30 patients aged between 15 and 25 years referring to Babol University of Medical Sciences due to dental crowding and didn't have vertical skeletal defects. 0.016-inch Rhodium-Coated A-NiTi wire was placed on patients' maxillary brackets. Patients were randomly divided into three groups of ten: The control group used only fluoride toothpaste, the second group used fluoride toothpaste with sodium fluoride mouthwash (0.05%) and the third group used fluoride toothpaste with Acidulated Phosphate Fluoride gel (1.23% APF). After six weeks, the values of unloading force (N), yield strength (N/m2) and stiffness (N/m) of the wires were obtained using a three-point bending test.

    Findings

    The mean unloading force and stiffness of the second group wires were higher than that of the other groups and in the first group, they were higher than the control group in all values, but no significant differences were found between the groups. There was a significant difference between the yield strengths of different groups (p=0.038). The mean yield strength in the second group was higher than the other groups (0.94±0.16 N/m2) and was significantly different from the control group (0.75±0.19 N/m2) (p=0.030).

    Conclusion

    According to this study, method of fluoride administration does not affect the unloading force and stiffness but the yield strength of rhodium-coated NiTi archwires increases with an increase in the fluoride concentration.

    Keywords: Orthodontic Wires, Mechanical Tests, Sodium Fluoride
  • صدیقه شیخ زاده، مریم جوهری، احسان موعودی، همت قلی نیا، مهدیه وحیدی*
    سابقه و هدف

    دندان پره مولر دوم نهفته مندیبل (MnP2)  سومین دندان نهفته شایع می باشد. با ارزیابی موقعیت سه بعدی دندان نهفته و درمان به موقع می توان از مشکلات احتمالی و آسیب به ساختارهای مجاور جلوگیری کرد. لذا با توجه به کمبود اطلاعات موجود در این زمینه، هدف مطالعه حاضر بررسی MnP2 و اثر آن بر ساختارهای مجاور با استفاده از تصاویر دقیق توموگرافی کامپیوتری با اشعه مخروطی (CBCT) می باشد.

    مواد و روش ها: 

    در این مطالعه مقطعی، 25 تصویر CBCT مربوط به دندان پره مولر دوم نهفته مندیبل مورد ارزیابی قرار گرفت. دو رادیولوژیست تصاویر را از نظر یک طرفه دو طرفه بودن، موقعیت تاج دندان، امکان تحلیل ریشه دندان دایمی مجاور، Dilaceration ریشه، عمق نهفتگی، نوع نهفتگی، احتمال بروز پاتولوژی، دندان شیری باقی مانده و موقعیت و فاصله نسبت به کانال مندیبولار و سوراخ منتال بررسی و مقایسه نمودند.

    یافته ها: 

    اکثر موارد به صورت یک طرفه بودند ((76%)19، 0/063=p). تاج اکثر کیس ها به صورت لینگوالی قرار گرفته بود ((68%)17، 0/324=p). شیوع نهفتگی از نوع عمودی و با زاویه دیستالی از بقیه موارد بیشتر بود ((48%) 12، (20%) 5، 0/922=p). در هیچ یک از موارد تحلیل ریشه دندان دایمی مجاور و تغییرات پاتولوژیک اتفاق نیفتاده بود. اکثر کیس ها در استخوان آلویل در عمق کم قرار گرفته بودند ((56%) 14، 0/270=p).

    نتیجه گیری:

     بر اساس نتایج این مطالعه احتمال اینکه دندان پره مولر دوم نهفته مندیبل افراد جوان بر ساختارهای مجاور اثر نامطلوب بگذارد، بسیار کم است.

    کلید واژگان: مندیبل، دندان، نهفتگی، پره مولر، توموگرافی کامپیوتری با اشعه مخروطی
    S .Sheikhzadeh, M .Johari, E. Muoudi, H. Gholinia, M.Vahidi*
    BACKGROUND AND OBJECTIVE

    Mandibular second premolars are the third most frequent impacted. By evaluating the three-dimensional position of the impacted tooth and timely treatment, possible problems and damage to adjacent structures can be prevented. This study was designed to assess the position of Impacted Mandibular Second Premolar (MnP2) as well as the effect on adjacent structures using CBCT imaging due to the lack of adequate studies in this field.

    METHODS

    This cross-sectional study was performed on 25 impacted mandibular second premolars. Two radiologists assessed and compared CBCT images to determine the following variables: unilateral/bilateral, position of the crown, root resorption of the adjacent permanent teeth, root dilaceration, depth of impaction, type of impaction, pathology incidence, residual primary tooth, position and distance to inferior alveolar nerve canal and the mental foramen.

    FINDINGS

    In most cases, unilateral impaction was seen (19(76%), p=0.063). Crown position of most of MnP2 was displaced lingually (17(68%), p=0.324). Vertical and distoangular position of tooth were more common (12(48%) and 5(20%), p=0.922). Root resorption of the adjacent permanent teeth and dental pathologies did not occur in any of cases. Most of Mnp2 were categorized under the classification as mild (14(56%), p=0.270).

    CONCLUSION

    According to the results of the present study, it is unlikely that the MnP2 of young patients analyzed in this study would adversely affect adjacent structures.

    Keywords: Mandible, Tooth, Impacted, Bicuspid, Cone-Beam Computed Tomography
  • زهره غفاری، صدیقه شیخ زاده*، احسان موعودی، ولی الله آرش، همت قلی نیا، محسن امامقلی پور

    سابقه و

    هدف

     رابطه متناسب بین ساختار های مختلف صورت که شامل ضخامت بافت نرم و اجزای دندانی و اسکلتی می باشد، کلید اصلی زیبایی است. برخلاف گذشته که تنها بر روی بافت سخت و اکلوژن دندانی تاکید می شد، امروزه دستیابی به تناسب بافت نرم صورت هدف اولیه درمان ارتودنسی می باشد. هدف از این مطالعه، بررسی ضخامت بافت نرم صورت با رابطه اسکلتی کلاس I در رادیوگرافی لترال سفالومتری و مقایسه این مقادیر میان زنان و مردان می باشد تا از نتایج آن در طرح درمان های ارتودنسی و جراحی های کرانیوفاسیال استفاده شود.

    مواد و روش ها

     در این مطالعه مقطعی 180 رادیوگرافی لترال سفالومتری از 77 مرد و 103 زن با بازه سنی 18 تا 24 سال که به مطب های خصوصی ارتودنسی مراجعه کرده بودند، بر روی کاغذ استات تریس شد و 10 متغیر آناتومیکیGlabella ، Nasion، Rhinion، Subnasal، Upper lip، Stomion،lip Lower ، Labiomental region ، Pogonion و Menton به موازات پلن فرنکفورت اندازه گیری شد.

    یافته ها

     ضخامت بافت نرم صورت در مردان در نواحی Nasion (مردان=1/55±5/65، زنان=1/47±4/38)،  Rhinion(مردان=0/64±3/07، زنان=0/57±2/5)، Subnasal (مردان=2/55±16/39، زنان=1/44±14/05)، Upper lip (مردان=2/29±15/51، زنان=1/64±13/57)،Lower lip  (مردان=1/85±16/48، زنان=1/39±14/64)، Labiomental region (مردان=1/46±11/02، زنان=1/67±10/49) و Pogonion (مردان=1/64±11/4، زنان=1/77±10/32) به دست آمد که در مردان به طور معنی داری بیشتر از زنان می باشد (0/05>p).

    نتیجه گیری

     بر اساس نتایج این مطالعه، تفاوت معنی داری در ضخامت بافت نرم صورت بین دو جنس مشاهده شد، به طوریکه مردان در بیشتر نواحی، ضخامت بافت نرم صورت بیشتری نسبت به زنان داشتند.

    کلید واژگان: ضخامت بافت نرم صورت، لترال سفالومتری، گروه های نژادی
    Z. Ghaffari, S. Sheikhzadeh *, E. Moudi, V .Arash, H .Gholinia, M. Emamgholipour
    BACKGROUND AND OBJECTIVE

     Proportional relationship between different facial structures, including soft tissue thickness and dental and skeletal components, is the key to beauty. Today facial soft tissue harmony is the primary goal of orthodontic treatment, unlike the past which focused only on hard tissue and dental occlusion. The aim of this study was to measure facial soft tissue thickness in the northern population of Iran with class I skeletal pattern in lateral cephalometry and compare these values between males and females to use the results in orthodontic treatment and craniofacial reconstructions.

    METHODS

     In this cross-sectional research, 180 lateral cephalometry of 77 male and 103 female, aged between 18-24 years who had referred to private orthodontic offices, were traced on acetate paper. Then, 10 anatomical variables were measured in Glabella, Nasion, Rhinion, Subnasal, Upper lip, Stomion, Lower lip, Labiomental region, Pogonion and Menton parallel to the Frankfurt plan.

    FINDINGS

     Facial soft tissue thickness in males was significantly higher than females in Nasion (male=5.65±1.55, female=4.38±1.47), Rhinion (male=3.07±0.64, female=2.5±0.57), Subnasal (male=16.39±2.55, female=14.05±1.44), Upper lip (male=15.51±2.29, female=13.57±1.64), Lower lip (male=16.48±1.85, female=14.64±1.39), Labiomental (male=11.02±1.46, female=10.49±1.67) and Pogonion (male=11.4±1.64, female=10.32±1.77) (p<0.05).

    CONCLUSION

     Based on the results of this study, there was a significant difference in facial soft tissue thickness between the two genders in the north Iranian population so that males had more facial soft tissue thickness than females in most of the areas.

    Keywords: Facial Soft Tissue Thickness, Lateral Cephalometry, Ethnic Groups
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال