Modeling Reinforced Concrete Beam with Reinforced Internal Failure by FRP and Comparing It with Laboratory Sample

Diagnosing type and amount of deficits in beams and structure is highly important in terms of performance and impact. Despite of paramount studies on CFRP application, its usage as Strips can be mentioned as one of the most important ways. Using Half Scale in building structure and lab beams would provide more adducible results. Considering type of breakdown and its progress, the growth cracks on the surface of beams is different. In all constructions, the manner of implementation and the quality of materials are two important principles in terms of performance and efficiency of the structure. In present study, type breakdown in the beam of reinforce concrete is addressed in a nondestructive manner. In this technique, by using finite element method in identifying beam breakdown without creating an unstable condition, one can achieve a nondestructive situation in experiments which is significantly cost – effective. Hence, 16 250mm × 250mm × 2100mm concrete beams were built and divided into two groups with and without FRP composite. Each group has a control beam and remained samples have breakdown in concrete and rebar. Prepared beams were put in a 4 – point experiment and, upon gathering and analyzing relevant data, beams prototyping was begun. By using finite element method, all beams were prototyped in lab. The findings from prototyping and lab analyses are compared in the format of load – location change graph. One can consider the results of prototyping as a proper approximation of lab samples.