به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
فهرست مطالب نویسنده:

gh. kiani

  • غفار کیانی*، ساسان گل چشمه
    پژوهش حاضر با هدف برآورد اجزای واریانس ژنتیکی و قابلیت های ترکیب پذیری عمومی و خصوصی برخی صفات کمی در ژنوتیپ های گوجه فرنگی با استفاده از تجزیه لاین×تستر انجام شد. لاین های SC و V به عنوان پایه مادری و تسترهای L، R و MZ به عنوان والدین پدری با یکدیگر تلاقی یافتند و در سال بعدی شش نتاج هیبرید به همراه والدین تلاقی ها در آزمایشی به صورت طرح بلوک های کامل تصادفی با سه تکرار در مزرعه دانشگاه علوم کشاورزی و منابع طبیعی ساری کشت شدند. صفات مورد ارزیابی شامل تعداد روز تا اولین گل دهی، زودرسی (تعداد روز از جوانه زنی تا اولین رنگ گیری میوه)، تعداد میوه در بوته، وزن میوه در بوته (گرم)، عملکرد میوه (گرم)، طول و عرض میوه (سانتیمتر) بودند. نتایج تجزیه واریانس لاین×تستر نشان داد میانگین مربعات والدین و تسترها برای تمامی صفات به جز طول و عرض میوه و میانگین مربعات تلاقی ها و لاین ها برای تمامی صفات به جز طول میوه معنی دار بودند. اثر لاین×تستر برای تمامی صفات به جز تعداد میوه در بوته و طول میوه معنی دار بود. لاین SC برای بهبود صفات تعداد روز تا اولین گلدهی، زودرسی، ارتفاع بوته، وزن میوه در بوته و عرض میوه و لاین V برای بهبود صفت تعداد میوه در بوته ترکیب شونده های عمومی مناسبی با تسترها بودند. تستر L برای بهبود تمام صفات به جز عملکرد و تستر MZ برای بهبود صفت ارتفاع بوته بهترین ترکیب شونده های عمومی با لاین های مادری بودند. در میان تلاقی ها، تلاقی SC×L برای بهبود صفات زودرسی و عرض میوه و تلاقی های SC×R و V×MZ به ترتیب برای بهبود صفات ارتفاع بوته و وزن میوه در بوته ترکیب شونده های خصوصی مطلوبی بودند. بررسی متوسط وضعیت ژنوتیپ ها نشان داد از میان ارقام والدینی، لاین SC و از میان تلاقی ها، ژنوتیپ L×SC کم ترین میانگین ها را برای صفات تعداد روز تا اولین گلدهی و زودرسی داشتند. همچنین لاین SC برای صفت تعداد میوه در بوته و تلاقی L×SC برای صفات وزن میوه در بوته، عملکرد و عرض میوه بیش ترین میانگین ها را به خود اختصاص دادند. در میان والدین، لاین های مادری SC و V به ترتیب برای صفات تعداد میوه در بوته و ارتفاع بوته، تستر L برای صفت عملکرد میوه و تستر MZ برای صفات وزن میوه در بوته و عرض میوه بیش ترین میانگین ها را ثبت کردند. در میان تلاقی ها، تلاقی L×SC برای صفات وزن میوه در بوته، عملکرد و عرض میوه، تلاقی L×V برای صفت تعداد میوه در بوته و تلاقی V×MZ برای صفت ارتفاع بوته بیش ترین میانگین ها را به خود اختصاص دادند. به طور کلی، بررسی متوسط وضعیت ژنوتیپ ها نشان داد هیبرید L×SC برای صفات تعداد روز تا اولین گلدهی، زودرسی، وزن میوه در بوته، عملکرد میوه و طول و عرض میوه برتر از والدین خود می باشد. برآورد واریانس های افزایشی و غیرافزایشی نشان داد در صفات ارتفاع بوته و وزن میوه در بوته، واریانس افزایشی نقش اصلی داشته و گزینش از میان نسل های درحال تفکیک روش اصلاحی مناسبی برای صفات مذکور است. درحالی که برای صفات تعداد روز تا اولین گلدهی، زودرسی و عملکرد سهم واریانس غیرافزایشی بیش تر از واریانس افزایشی بود، لذا برای بهبود صفات مذکور تولید هیبرید توصیه می شود.
    کلید واژگان: تستر، گوجه فرنگی، لاین، واریانس افزایشی، واریانس غیرافزایشی
    Gh. Kiani *, S. Golcheshmeh
    Introduction
    Tomato is a self-pollinated crop and has a high potential for heterosis production. Tomato has a wide range of diversity in terms of vegetative and fruit traits. Therefore, learning information about the genetics of the tomato plant and the inheritance of its various traits to the next generation will help plant breeders to use appropriate breeding methods to improve them. One of the methods that is used to know the genetic structure of plants, identify parental lines and determine their combining ability is line × tester analysis. Line × tester analysis provides information about general and specific combining of parents and can be useful in estimating different types of gene effects such as additive and non-additive effects. In most of the developed countries, many researches have been done in relation to hybrid production and combining ability among tomato lines, and sometimes the inferred results are different from each other. In Iran, few studies have been done about crossing cultivars and their hybrids, and most of the seeds used by farmers are imported from other countries. Therefore, this study intends to evaluate genetic variance components, general and specific combining ability of some quantitative traits in a number of tomato lines and testers and their hybrids by using line × tester analysis.
     
    Materials and Methods
    This research was conducted in Sari Agricultural Sciences and Natural Resources University, Mazandaran Province, Iran in 2022. Two modified cultivars SC and V as lines and three modified cultivars L, R and MZ as testers were crossed with each other to create F1 hybrids. Six F1 genotypes and their parents (11 treatments in total) were cultivated in the farm in a randomized complete block design with three replications. The evaluated traits included the number of days to the first flowering, earliness, number of fruits per plant, fruit weight per plant (g), fruit yield (g), fruit length and width (cm). In order to analyze the variance of the experimental design to search for diversity between treatments, to separate the effects of treatments into their components based on line × tester analysis, to mean comparison with Duncan's test, and also to calculate the general and specific combining ability, R statistical software was used. Also, in order to calculate additive and non-additive variances, Singh and Chaudhary's method was used.
     
    Results and Discussion
    The results of line × tester variance analysis showed that the mean squares of parents and testers were significant for all traits except fruit length and width, and the mean squares of crosses and lines were significant for all traits except fruit length. The effect of line × tester was significant for all traits except the number of fruits per plant and fruit length. The line of SC to improve the number of days to first flowering, earliness, plant height, fruit weight per plant, and fruit width, and the line of V to improve the number of fruit per plant were the best general combiners with testers. The tester of L for improve all traits except yield, and the tester of MZ for improve plant height were the best general combiners with the maternal lines. Among the crosses, the SC×L cross for improve earliness and fruit width, and the SC×R and V×MZ crosses for improve plant height and fruit weight per plant, respectively, were favorable specific combiners. The mean comparison of the genotypes for some important traits showed that among the parental cultivars, the line of SC and among the crosses, the SC×L genotype had the lowest means for the number of days to first flowering and earliness. Also, the line of SC for the number of fruits per plant and the SC×L genotype for fruit weight per plant, yield and fruit width had the highest means. Also, the estimation of additive and non-additive variances indicated that in plant height and fruit weight per plant traits, additive variance plays the main role. While for the traits of the number of days to first flowering, earliness and yield, the contribution of non-additive variance was more than the additive variance.
     
    Conclusion
    According to the results obtained from this study, in future projects it is recommended to use parents that have significant general combining ability (GCA) for traits. Because such parents easily transfer the trait to their next generation. In this way, the line of SC was a good general combiner for the number of days to first flowering, earliness, plant height, fruit weight per plant and fruit width, and the line of V was a good general combiner for the number of fruits per plant. Among the testers, the tester of L was a good general combiner for improve the number of days to first flowering, earliness, number of fruits per plant, fruit weight per plant, and fruit width, and the tester of MZ recorded a high GCA for the plant height. Also, for the improvement of earliness and fruit width, the SC×L cross and for plant height and fruit weight per plant, SC×R and V×MZ crosses were favorable specific combiner. Mean comparison of genotypes showed that the SC×L cross is superior to its parents for the number of days to first flowering, earliness, fruit weight per plant, fruit yield, and fruit length and width. The traits of plant height and fruit weight per plant are more affected by additive variance, so the best breeding method to improve plant height and fruit weight per plant is selection from among the segregating population. The traits of number of days to first flowering, earliness and yield were affected by non-additive variance, so hybrid production is recommended to improve the mentioned traits.
    Keywords: Additive variance, Line, Non-additive variance, Tester, Tomato
  • مهران عسگری پور*، غفار کیانی، سید کمال کاظمی تبار

    این مطالعه با هدف بررسی پارامترهای ژنتیکی در ده رقم هیبرید کدو مسمایی شامل هفت رقم هیبرید خارجی (F1 شیراز، F1 خلیج، F1 ثمر، F1 رهام، F1 دافنه، F1 اسماء و F1 اوتو) و سه رقم هیبرید داخلی (F1 پرونش، F1 BL و F1 CL) در قالب طرح بلوک های کامل تصادفی با 3 تکرار در محل های ایستگاه تحقیقاتی بررسی آفات و ایستگاه تحقیقاتی شهید فزوه اصفهان در کشت تابستانه سال زراعی 1399- 1398 اجرا شد. کشت در دو مزرعه در یک تاریخ حداکثر با فاصله یک روز صورت گرفت. عملیات آماده سازی بستر انجام و بذرها در اواسط خردادماه در زمین اصلی کشت شدند. نتایج نشان داد، بیشترین میانگین تعداد میوه در بوته در ژنوتیپ های CL و شیراز و بالاترین عملکرد در بوته در چهار برداشت، در ژنوتیپ پرونش مشاهده شد. ژنوتیپ های رهام و اوتو کمترین مجموع عملکرد هر بوته را نشان دادند. ژنوتیپ BL بیشترین میانگین قطر میوه در چهار برداشت و بیشترین وزن میوه نمونه بذری را نشان داد. بیشترین وزن بذر تر در ژنوتیپ های شیراز و اسماء و بیشترین نسبت وزن بذر به میوه در ژنوتیپ ثمر حاصل شد. ژنوتیپ های BL، اسما و شیراز بیشترین وزن بذر خشک را نشان دادند. بیشترین طول بذر و بیشترین وزن 100 عدد بذر خشک در ژنوتیپ های پرونش و BL مشاهده شدند. بین برخی از صفات نیز همبستگی مثبت و معنی داری مشاهده شد. در بین ژنوتیپ های مورد بررسی ژنوتیپ پرونش و BL در اکثر صفات برتری معنی داری را نسبت به سایر ژنوتیپ ها نشان دادند. همچنین ژنوتیپ شیراز در برخی از صفات بذر دارای برتری معنی داری در مقایسه با دیگر ژنوتیپ ها بود. مطالعات تنوع ژنتیکی در گیاه کدو مسمایی در جهت ارزیابی، جمع آوری و کاربرد ژرم-پلاسم این گیاه طی برنامه های اصلاحی آتی می تواند مفید واقع شود. بر طبق نتایج، ژنوتیپ های مختلف گیاه کدو مسمایی از نظر صفات مختلف با یکدیگر تفاوت بارزی داشتند که می توانند به منزله بخشی از خزانه ژنی این گیاه در نظر گرفته شوند.

    کلید واژگان: اصلاح، تنوع ژنتیکی، قطر میوه، طول بذر، همبستگی صفات
    M. Asgaripour*, Gh. Kiani, S. K. Kazemi Tabar

    This study aimed to investigate the genetic parameters of ten Cucurbita pepo L. hybrid cultivars, including seven foreign hybrid cultivars (F1 Shiraz, F1 Khaleej, F1 Samar, F1 Roham, F1 Daphne, F1 Asma and F1 Oto) and three domestic hybrid cultivars (F1 Peronesh, F1 BL and F1 CL) in the form of a randomized complete block design with 3 replications at the Pest Investigation Research Station and the Shahid Fozveh Research Station of Isfahan, central Iran, in 2019. The bed preparation operation was done and the seeds were sown in the mid-June. The results showed that the highest fruits/plant was observed in CL and Shiraz genotypes and the highest yield/plant in four harvests was observed in Peronesh genotype. Roham and Otto genotypes showed the lowest total yield/plant. BL genotype showed the highest mean fruit diameter in four harvests and the highest fruit weight of the seed sample. The highest seed weight was obtained in Shiraz and Asma genotypes and the highest seed-to-fruit weight ratio was obtained in Samar genotype. BL, Asma and Shiraz genotypes showed the highest seed dry weight. The highest seed length and the highest dry weight of 100 seeds were observed in Peronesh and BL genotypes. A positive and significant correlation was also observed between some traits. Among the investigated genotypes, Peronesh and BL genotypes outranked the other genotypes in most of the traits. Also, Shiraz genotype had a significant advantage in some seed traits compared to other genotypes. According to the presented results, different genotypes of the pumpkin plant were significantly different from each other in terms of various traits, indicating that the ground is prepared to employ these resources for improving the yield of this plant species.

    Keywords: Breeding, Genetic diversity, Fruit diameter, Seed length, Trait correlation
  • ساسان گل چشمه، غفار کیانی*، سید کمال کاظمی تبار، سعید نواب پور

    گوجه فرنگی محصولی با طیف وسیعی از ژنوتیپ ها با عملکردهای متفاوت است و گزینش بر اساس صفت عملکرد و اجزای آن می تواند به برنامه های اصلاحی این گیاه سرعت ببخشد. در پژوهش حاضر به منظور ارزیابی عملکرد و اجزای آن روی 25 لاین گوجه فرنگی، آزمایشی در قالب طرح بلوک های کامل تصادفی با سه تکرار انجام شد. صفات شامل تعداد روز تا گلدهی، تعداد روز از جوانه زنی تا اولین رنگ گیری میوه (زودرسی)، ارتفاع بوته (سانتی متر)، تعداد میوه در بوته، وزن میوه در بوته (گرم)، عملکرد میوه در بوته (گرم)، طول و عرض میوه (سانتی متر) بودند. نتایج تجزیه واریانس نشان داد در میان تمامی لاین ها تفاوت معنی داری از نظر صفات مورد بررسی وجود دارد. همچنین تجزیه به مولفه های اصلی نیز بر اساس صفات مورفولوژیک نشان داد که دو مولفه اصلی اول، در مجموع 75 درصد از تنوع فنوتیپی کل در بین داده ها را توجیه کردند و صفات تعداد روز از جوانه زنی تا اولین رنگ گیری میوه (606/0-)، تعداد روز تاگلدهی (516/0-)، وزن میوه در بوته (492/0)، عرض میوه (480/0)، طول میوه (472/0)، ارتفاع بوته (445/0-)، عملکرد میوه در بوته (395/0) و تعداد میوه در بوته (367/0-) بیش ترین سهم را در تغییرات عملکرد داشتند. همچنین تجزیه خوشه ای به روش UPGMA نیز لاین های مورد مطالعه را در نه گروه قرار داد و لاین های گروه IX از نظر صفات عملکرد و اجزای آن، لاین های گروه VIII از نظر زودرسی و گلدهی و لاین های گروه IV از نظر تعداد میوه در بوته در وضعیت مطلوبی قرار داشتند و لاین های موجود در گروه های I و V نیز برای تمامی صفات در وضعیت متوسطی بودند.

    کلید واژگان: تجزیه به مولفه های اصلی، تجزیه خوشه ای، تجزیه واریانس، تنوع ژنتیکی، همبستگی
    S. Golcheshmeh, Gh. Kiani *, S.K. Kazemitabar, S. Navabpour
    Introduction

     Tomato is a product with a wide range of genotypes with different yields and selection based on this trait and its components can accelerate the breeding programs of this plant. The most important goals of tomato breeders have been to increase yield, disease resistance, early maturity, and improve the quality characteristics of the fruit. Therefore, awareness of genetic diversity in the population is an important step in plant breeding, and to achieve this goal, the studied genotypes must first be identified in terms of genetic potential and favorable agronomic traits. The usual approach for describing and evaluating populations requires cultivating sample populations and evaluating their morphological and agronomic characteristics. In this regard, multivariate statistical methods play an important role in studying genetic diversity and selecting appropriate parents. Unfortunately, the tomato cultivars used in Iran are often not at the favorable level in terms of important traits such as the number of days to fruit ripening, fruit weight, fruit yield, fruit length, and width, and few studies have been done on these traits. Therefore, this study was conducted to investigate the morphological diversity, evaluate the yield and its components among some imported tomato lines using analysis of variance, cluster analysis, and principal component analysis.

    Materials and Methods

     This study was performed in Sari University of Agricultural Sciences and Natural Resources, Mazandaran, Iran in 2020. The plant material included 24 tomato lines imported from the Canadian Plant Gene Bank and one check variety. The experimental design used for morphological analysis was a randomized complete block design with three replications. Evaluated characteristics were included of the number of days to first flowering, number of days from germination to first fruit coloring (early ripening), plant height (cm), number of fruits per plant, average fruit weight per plant (g), plant yield (g), length and width of the fruit (cm). After measuring the characteristics at the farm and recording the data, analysis of variance was performed to examine the diversity between lines in terms of the studied variables, and Duncan test was used to compare the means and SAS software was used to test the correlation coefficients of the variables. Cluster analysis for grouping of tomato lines was performed based on the mean of the main data of standardized traits, which was determined by Euclidean distance to determine the distance between the lines, and the UPGMA method was used to merge the clusters. Principal component analysis was performed based on the mean of the main data of morphological traits.

    Results and Discussion

     The results of the analysis of variance showed that there was a significant difference between all lines in terms of the studied characters. Also, principal component analysis based on morphological traits showed that the first two main components accounted for 75% of the total phenotypic variation in the data and the number of days from germination to first fruit coloring (-0.606), the number of days to first flowering (-0.516), fruit weight per plant (0.492), fruit width (0.480), fruit length (0.472), plant height (-0.445), fruit yield per plant (0.395) and the number of fruits per plant (-0.367) had the highest contribution in yield changes. Therefore, these variables might be taken into consideration for effective selection of parents for hybridization programs for broadening the genetic base in the population as well as to develop elite lines or F1 hybrids. UPGMA cluster analysis also divided the studied lines into nine groups. Group IX lines were in good condition in terms of yield traits and components, group VIII lines in terms of maturity and flowering, and group IV lines in terms of fruit number per plant. And the lines in groups I and V were in moderate condition for all traits. According to these results, the cross of the lines in the more distant groups can produce hybrids with high diversity and maximum heterosis.

    Conclusion

     According to the main purpose of this study, which was to evaluate the yield and its components and according to the analysis performed, lines 8, 11, and 17 due to showing the least number of days to flowering and early, lines 10 and 14 due to having the highest yield, the highest fruit weight, and highest fruit length and width and lines 2, 9, 15, 21, and 24 due to having the highest number of fruits per plant and the favorable height are also recommended for use in tomato breeding programs.

    Keywords: Cluster analysis, Correlation, Genetic diversity, Principal Components Analysis
  • سیما آبیار، سعید نواب پور*، رحمت الله کریمی زاده، امیر قلی زاده، علی اصغر نصرالله نژاد قمی، غفار کیانی

    آگاهی از اثر متقابل ژنوتیپ × محیط به به نژادگران کمک می کند تا بتوانند ژنوتیپ های سازگار و پایدار را برای مناطق مختلف انتخاب کنند. هدف از این پژوهش، گزینش ژنوتیپ های پرمحصول سازگار با شرایط آب و هوایی مناطق دیم گرمسیری و نیمه گرمسیری و برتر از رقم شاهد منطقه در گندم نان بود. در این پژوهش، 15 ژنوتیپ گندم نان برگزیده از آزمایش های پیشرفته مقایسه عملکرد، به همراه رقم شاهد آفتاب، در قالب طرح بلوک های کامل تصادفی با سه تکرار به مدت سه سال زراعی (99-1396) در چهار منطقه (گچساران، گنبد، خرم آباد و مغان) مورد مطالعه قرار گرفتند. به منظور تجزیه اثر متقابل ژنوتیپ × محیط از روش چند متغیره اثرات اصلی جمع پذیر و اثر متقابل ضرب پذیر (AMMI) استفاده شد. نتایج تجزیه واریانس مرکب نشان داد که به ترتیب 91/49، 1/54 و 5/03 درصد از کل تغییرات داده ها مربوط به اثر محیط، ژنوتیپ و اثر متقابل ژنوتیپ × محیط بود. نتایج نشان داد که هفت مولفه اصلی مدل AMMI معنی دار بودند و 97/94 درصد از تغییرات اثر متقابل ژنوتیپ × محیط را توجیه کردند. بای پلات میانگین عملکرد دانه و اولین مولفه اصلی اثر متقابل برای ژنوتیپ ها و محیط ها نشان داد که ژنوتیپ های G1، G11 و G12 با عملکردی بیش از میانگین و کمترین اثر متقابل به عنوان ژنوتیپ های پایدار و با عملکرد بالا شناخته شدند که از بین آنها G11 با توجه به دارا بودن سازگاری عمومی مناسب، می تواند به عنوان ژنوتیپ امیدبخش و کاندید معرفی رقم جدید برای مناطق دیم گرمسیر و نیمه گرمسیر انتخاب شود. در این پژوهش، منطقه خرم آباد به دلیل داشتن اثر متقابل بالا، به عنوان ایده آل ترین محیط جهت تمایز و جدا کردن ژنوتیپ های گندم نان شناخته شد. تجزیه خوشه ای، محیط های مورد مطالعه را به سه گروه تفکیک کرد. قرار گرفتن هر سه سال آزمایش مربوط به منطقه مغان در یک گروه بیانگر قابلیت پیش بینی و تکرارپذیری بالای این منطقه است.

    کلید واژگان: اثر متقابل ژنوتیپ × محیط، مناطق دیم گرمسیری و نیمه گرمسیری، تجزیه AMMI، تجزیه پایداری، بای پلات
    S. Abyar, S. Navabpour*, R. Karimizadeh, A. Gholizadeh, A. A. Nasrollahnejad Ghomi, Gh. Kiani

    Knowledge about genotype × environment interaction helps breeders to select the best adaptable and stable genotypes for different regions. The main objective of this research was to select higher yielding bread wheat genotypes, compared to control cultivar, that are adaptable to the climatic conditions of the tropical and subtropical rainfed regions of Iran. Thus, 15 bread wheat genotypes selected from advanced yield comparison experiments, along with the check cultivar of Aftab, were studied in a randomized complete block design with three replications for three cropping seasons (2017-2020) in four regions (Gachsaran, Gonbad, Khorramabad and Moghan). In order to analyze the genotype × environment interaction the multivariate method of Additive Main Effects and Multiplicative Interaction (AMMI) was used. The Results of combined analysis of variance indicated that 91.49, 1.54 and 5.03 percentage of the total variations are related to environment, genotype and genotype × environment interaction, respectively. Moreover, results showed that the first seven principal components of the AMMI model were significant and explained 97.94% of genotype × environment interactions. The biplot of mean grain yield and the first principle component of genotypes and environments revealed that genotypes G1, G12 and G11 with a higher grain yield than the overall mean and lowest genotype × environment interaction were stable with high grain yield. Among them, genotype 11 with suitable general adaptability can be selected as promising genotype and a candidate for introducing a new cultivar for arid and semiarid rainfed regions. In this research, Khorramabad, with high proportion of genotype × environment interaction was recognized as the ideal environment for differentiation and separation of bread wheat genotypes. The cluster analysis classified the studied environments into three groups. The inclusion of all three years experiments related to Moghan location in one group indicates the high predictability and repeatability of this region.

    Keywords: Genotype × environment interaction, Tropical, subtropical rainfed regions, Additive main effects, multiplicative interaction analysis, Stability analysis, Biplot
  • الهه شادان، حمید نجفی زرینی*، بهرام علیزاده، غلامعلی رنجبر، غفار کیانی

    با توجه به نیاز روز افزون کشور به واردات روغن و اهمیت کلزا در بین دانه های روغنی، افزایش عملکرد دانه و درصد روغن از اهمیت بسیار بالایی برخوردار است. بنابراین شناخت صفاتی که موجب افزایش عملکرد دانه می شوند، نقش مهمی در موفقیت برنامه های به نژادی دارند. شانزده ژنوتیپ کلزا، طی آزمایشی درسال زراعی 96-1395 در سه منطقه کرج، اصفهان و همدان در قالب طرح بلوک های کامل تصادفی در سه تکرار مورد بررسی قرار گرفتند و صفاتی مانند تعداد خورجین در بوته، تعداد دانه در خورجین، عملکرد دانه، وزن هزار دانه، ارتفاع بوته، ارتفاع اولین ساقه جانبی از سطح زمین، قطر ساقه، درصد روغن، صفات روز تا شروع گلدهی، روز تا پایان گلدهی، طول دوره گلدهی و روز تا رسیدگی اندازه گیری شدند. نتایج رگرسیون گام به گام نشان داد در کرج صفات تعداد دانه در خورجین، روز تا رسیدگی و تعداد خورجین در بوته(97/7 = R2)، در اصفهان صفات روز تا رسیدگی و تعداد خورجین در بوته (78/4 = R2) و در همدان صفات روز تا رسیدگی و تعداد دانه در خورجین (45/5 = R2) بیشترین تغییرات عملکرد دانه را توجیه کردند. نتایج نشان داد تعداد روز تا رسیدگی، تعداد خورجین در بوته، تعداد دانه در خورجین، قطر ساقه و ارتفاع بوته بیشترین تاثیر را در افزایش عملکرد و روغن دانه داشتند. لذا از صفات مذکور می توان به عنوان معیار انتخاب مناسب برای افزایش عملکرد دانه و روغن در برنامه های به نژادی کلزای زمستانه استفاده کرد.

    کلید واژگان: رگرسیون گام به گام، تجزیه عاملی، انتخاب غیرمستقیم، روش های آماری چند متغیره
    E. Shadan, H. Najafi Zarrini*, B. Alizadeh, Gh. Ranjbar, Gh. Kiani

    Due to the increasing need of the country to imported edible oil and rapeseed importance among oilseeds, efforts to increase its grain yield and oil content are of high importance. Therefore, recognizing the traits that increase grain yield of rapeseed has an important role in the success of breeding programs. Thus, sixteen rapeseed genotypes were evaluated in a randomized complete block design with three replications in three regions with different climatic conditions in Iran, including Karaj, Isfahan, and Hamadan in 2016-2017. Traits such as number of pods per plant, number of seeds per pod, grain yield, 1000-grain weight, plant height, height of the first branch, stem diameter, oil percent, number of days to flowering, number of days to the end of flowering, duration of flowering, and number of days to maturity were measured. Stepwise regression analysis showed that number of grain/pod, number of days to maturity and number of pods/plant (R2 = 97.7), number of pods/plant and number of days to maturity (R2 =78.4) and number of days to maturity and number of grains/pod (R2 = 45.5) accounted for total variations of grain yield in Karaj, Isfahan and Hamadan, respectively. The results showed that the number of days to maturity, number of pods/plant, number of grain/pods, stem diameter and plant height had the greatest positive effect on grain yield and oil content. Therefore, these traits can be used as suitable selection tools for increasing grain and oil yield in winter rapeseed breeding programs

    Keywords: Stepwise regression, Factor analysis, Indirect selection, Multivariate statistical methods
  • سوسن فکری، قمر کیانی *
    زمینه و هدف
    خودکشی یکی از مشکلات جدی سلامت عمومی است و اقدام به خودکشی به عنوان یکی از شاخص های مهم بهداشت روانی افراد در فرهنگ های مختلف به شمار می رود. پژوهش حاضر با هدف مقایسه سلامت معنوی، سرکوب فکر و حمایت اجتماعی در افراد اقدام کننده به خودکشی و افراد عادی شهر زنجان انجام شد.
    روش بررسی
    روش پژوهش علی مقایسه ای بود. از جامعه آماری اقدام کنندگان به خودکشی که به مراکز درمانی ولی عصر و آیت الله موسوی زنجان مراجعه نموده بودند، به روش نمونه گیری در دسترس، 84 نفر انتخاب شدند. در گروه مقایسه نیز از افراد عادی همگن با گروه اقدام به خودکشی، 84 نفر انتخاب شد. از پرسشنامه های سلامت معنوی الیسون و پالوتزین، سیاهه سرکوب خرس سفید و حمایت اجتماعی برای جمع آوری داده ها استفاده شد. داده ها در نرم افزار SPSS نسخه 22 با کمک آزمون آماری t استیودنت و یومن ویتنی مورد تجزیه و تحلیل قرار گرفت.
    یافته ها
    نتایج نشان داد که سلامت معنوی و مولفه های آن، سرکوب فکر، حمایت اجتماعی و مولفه های آن در گروه اقدام کننده به خودکشی با افراد عادی تفاوت معنی داری دارد (001/0>P). به نحوی که سلامت معنوی و مولفه های آن، همچنین حمایت اجتماعی و مولفه های آن در گروه اقدام کننده به خودکشی پایین تر از افراد عادی بود ولی سرکوب فکر در اقدام کنندگان به خودکشی بیشتر از افراد عادی بود.
    نتیجه گیری
    با توجه به یافته ها می توان نتیجه گرفت برخورداری از سلامت معنوی و حمایت اجتماعی بالا می تواند عامل محافظت کننده ای در برابر اقدام به خودکشی باشد ولی استفاده از سرکوب فکر به نظر می رسد در اقدام به خودکشی نقش داشته باشد.
    کلید واژگان: سلامت معنوی، سرکوب فکر، حمایت اجتماعی، خودکشی
    S. Fekri, Gh Kiani *
    Background And Objective
    The Suicide is a serious public health problem and the suicide attempt is one of the important indicators of mental health in different cultures. The purpose of this study was to compare the spiritual health, suppression of thought and social support in the suicidal subjects and normal people in Zanjan city.
    Materials And Methods
    From the statistical population of suicide attempters who referred to Vali-e- Asr and Ayatollah Mousavi hospitals in Zanjan, 84 subjects were selected through the available sampling method. In the control group, 84 subjects were selected from the individuals homogeneous to suicidal group. Ellison and Palutzin Spiritual Health Questionnaire, White Bear Suppression Checklist and Social Support were used for data collection. Data were analyzed by SPSS software using the t-test and Mann-Whitney U test.
    Results
    The results showed that the mental health and its components, suppression of thought, social support and its components in the suicidal group had a significant difference comparing to controls (P
    Conclusion
    According to the findings, it can be concluded that enjoying high spiritual health and high social support can be a protective factors against the suicide attempt. But the use of oppressive thought seems to play a role in suicidal attempts.
    Keywords: Spiritual Health, Suppression of thought, Social Support, Suicide
  • زین العابدین شهادتی مقدم، نادعلی باقری *، نادعلی باباییان جلودار، غفار کیانی، سیدعباس حسینی نژاد
    نماتد مولد گره ریشه (Meloidogyne incognita) یکی از مهم ترین بیمارگرهای توتون محسوب می شود. تعیین رفتار ژنتیکی مقاومت می تواند در اصلاح توتون مقاوم به نماتد بسیار موثر باشد. این مطالعه جهت تعیین ترکیب پذیری و پارامترهای ژنتیکی مقاومت به نماتد مولد گره ریشه در توتون با استفاده از تجزیه دی الل روش گریفینگ و با پنج ژنوتیپ والدینی انجام شد. سه والد مقاوم (KY9 و K17، Urmia3) و دو والد حساس (Ergo و Burley TMV4) بر اساس روش دی الل یک طرفه با هم تلاقی داده شدند. پانزده ژنوتیپ (والدین و هیبریدها) بر اساس طرح کاملا تصادفی با پنج تکرار در گلخانه کشت شده و پس از یک هفته با 2500 نماتد سن دوم مایه زنی شدند. بررسی صفات شاخص گال، تعداد توده تخم و میانگین تعداد تخم در هر توده تفاوت معنی داری بین ژنوتیپ ها نشان داد. برای صفات شاخص گال و تعداد توده تخم در ژنوتیپ های مورد بررسی اهمیت ترکیب پذیری عمومی بیش تر از خصوصی بود. اثرات غالبیت در صفت میانگین تعداد تخم در توده و اثرات افزایشی در صفات شاخص گال و تعداد توده تخم نقش بیشتری داشتند. وراثت پذیری خصوصی برای شاخص گال 73/0، برای تعداد توده تخم 54/0 و برای میانگین تعداد تخم در توده 07/0 بود که نشان داد شاخص گال و تعداد توده تخم صفات مناسبی برای بررسی مقاومت به نماتد هستند. رقم KY9 بالاترین ترکیب پذیری عمومی را برای تمام صفات در جهت منفی (کاهش صفت) داشت لذا این ژنوتیپ می تواند به عنوان والد دهنده مقاومت استفاده شود.
    کلید واژگان: توده تخم، دی الل، روش گریفینگ، شاخص گال، وراثت پذیری
    Z. Shahadati Moghadam, N. Bagheri *, N. Babaeian, Gh Kiani, Sa Hosseininejad
    Root-knot nematode (RKN) [Meloidogyne incognita] is one of the main pests of tobacco. Determination of genetic behavior for RKN resistance can be useful to improve the resistance of tobacco against RKN. This study was conducted to determine the combining abilities and genetic parameters of RKN resistance in tobacco using a five-parent diallel analysis by Griffing’s method. Three resistant parents (Urmia3, KY9, K17) and two susceptible parents (Ergo, Burley TMV4) were crossed based on half diallel. Fifteen genotypes (Parents and F1s) were planted in the greenhouse based on completely randomized design with five replications and inoculated with 2500 J2 M. incognita race 2 one week after transplanting. Investigation of Gall Index (GI), Number of Egg Masses (NEM) and Average of Eggs per Mass (AEM) showed significant differences among genotypes. The general combining ability was more important than the specific combining ability in GI and NEM. Non-additive effects in AEM and additive effects in GI and NEM had more important role. Narrow-sense heritability was 0.73, 0.54 and 0.07 for GI, NEM and AEM, respectively, which revealed that GI and NEM are suitable traits for RKN resistance identification. KY9 had the highest negative GSA in all traits. So this genotype is appropriate donor parent for RKN resistance.
  • مصطفی عیدی کهنکی، غفار کیانی، قربانعلی نعمت زاده
    تلفیق روش های کلاسیک اصلاح نبات و گزینش مبتنی بر نشانگرهای مولکولی، سرعت تولید لاین های جدید اصلاحی را افزایش خواهد داد. محدودیت ارقام مناسب اعاده کننده باروری، تعداد کم لاین های موثر و سازگار و پایه محدود ژنتیکی آن ها، از مشکلات اساسی در تولید برنج هیبرید به شمار می رود. مطالعه حاضر با هدف شناسایی و گزینش بوته های دارای ژن های اعاده کننده باروری در جمعیت های در حال تفکیک برنج (Oryza sativa L.). انجام شد. بر این اساس، مطالعه ژنوم هسته ای لاین های گزینش شده، همراه با بررسی های مولکولی جهت شناخت لاین های اعاده کننده باروری در دو جمعیت حاصل از تلاقی های متقارب (نعمت×پژوهش // IR58110× پژوهش) و (نعمت×پژوهش//IR60819 × پژوهش) و دو جمعیت حاصل از (×IR60819پژوهش و IR58110×پژوهش) طی دو سال نشان داد که لاین های R5، R7، R9، R28 و R45 با انجام آزمون های باروری دانه گرده و خوشه در مجموع دارای باروری بیش از 75 درصد بودند. با بررسی های مولکولی انجام شده بر روی لاین ها و ژنوتیپ های گزینش شده، چهار نشانگر SSR همبسته با ژن های Rf شامل: RM171، RM3148، RM1 و RM258 الگوی باندی مناسبی را از نظر ژن های اعاده کننده باروری ارائه نمودند به طوری که لاین هایR3، R5، R7، R9، R18، R25،R27، R28، R29 و R45 در نسل F4 حداقل برای دو نشانگر الگوی باندی، مشابه شاهد اعاده کننده باروری (IR50) را نشان دادند. با تلفیق نتایج حاصل، لاین های R5، R7، R9، R28 و R45 به عنوان لاین های دارای پتانسیل مناسب جهت اعاده کردن باروری شناسایی شدند که با بررسی های بیشتر در نسل های آینده می توانند به عنوان لاین های مطلوب اعاده کننده باروری در فرآیند تولید برنج هیبرید مورد استفاده قرار گیرند.
    کلید واژگان: برنج، گزینش، ژن(های) اعاده کننده باروری، نشانگر مولکولی
    M. Eidi Kohnaki, Gh Kiani, Gh Nematzadeh
    Combination of classical breeding with molecular marker-assisted selection speeds up the development of new breeding lines. Lack of appropriate restorer varieties, the low number of suitable lines and their narrow genetic base are fundamental problems in hybrid rice production. This study was performed with the aim of identification and selection ofplantswithrestorefertility genes in segregating populations of rice. Therefore study of nucleus genome of selected lines was conducted along with molecular studies for the identification of restorer lines in two convergent populations of rice Nemat × Pajohesh // IR58110 × Pajohesh and Nemat × Pajohesh // IR60819 × Pajohesh and two populations of Pajohesh × IR60819 and IR58110 × Pajohesh. The experiments were followed for two years and the results showed that the lines R5, R7, R9, R28 and R45 had desirable performance in the pollen and spicklet fertility test. Molecular analysis performed on selected lines and genotypes showed that the markers RM171, RM3148, RM1 and RM258 presented good banding patterns. Therefore, the lines R3, R5, R7, R9, R18, R25, R27, R28, R29 and R45 were identified as positive at least for two markers representing similar patterns torestorercheck (IR50). Thus, the results of pollen and spikes fertility tests and molecular studies demonstrated that lines R5, R7, R9, R28 and R45 are potential restorers. Further studies in future generations of theselinescanbe used as desirable lines inhybrid seed production.
  • قاسم کیانی، امیر حسین محوی، محمدهادی دهقانی، رامین نبی زاده
    مقدمه
    در بسیاری از کشور های جهان شیرابه زباله بدون هیچ تصفیه ای در محیط رها می شودو به دلیل ترکیب متفاوت شیرابه زباله در مکان های مختلف، تاکنون روش یکنواختی برای تصفیه آن ارائه نشده است. عدم کنترل و بی توجهی نسبت به تصفیه و دفع صحیح شیرابه موجب آلودگی محیط می گردد. این تحقیق با هدف بررسی اثرمنعقدکننده ها در حذف COD و TSS شیرابه زباله کارخانه کمپوست اصفهان انجام شد. بدین منظور از مواد منعقدکننده سولفات آهن،کلرور آهن، پلی فریک سولفات، آلوم و پلی آلومینیوم کلراید به همراه دو کمک منعقد کننده تجاری آنیونی و کاتیونی استفاده گردید.
    روش بررسی
    در این مطالعه که از نوع تجربی- آزمایشگاهی می باشد، نمونه شیرابه از حوضچه جمع آوری و ذخیره شیرابه کارخانه کمپوست اصفهان برداشت شد. در ابتدا خصوصیات شیرابه بر اساس روش استاندارد اندازه گیری گردید. در مراحل بعد با استفاده از روش آزمایش جار اثر تغییرات دوز مواد منعقد کننده (5/0، 1، 5/1، 2، 5/2 و3 گرم بر لیتر) و pH (12، 11، 9-4) در حذف COD و TSS بررسی گردید و نهایتا دوز موثر، pH بهینه و بهترین منعقد کننده مشخص شد.
    یافته ها
    حداکثر راندمان حذف TSS و COD با استفاده از پلی فریک سولفات بدست آمدکه دردوز g/l 2پلی فریک سولفات در 11 pH=، 49 درصد حذف COD و دردوز g/l 5/2، 51 درصدحذف TSS بدست آمد.کمک منعقد کننده K350CF به همراه منعقد کننده پلی فریک سولفات بیشترین افزایش راندمان حذف COD و TSS راداشته و به ترتیب برابر 53 و 52 درصد می باشد. بیشترین راندمان حذف COD در حضور کمک منعقد کننده LT25 را پلی آلومینیوم کلراید داشته که برابر 49درصد بود.
    نتیجه گیری
    در حذف COD و TSS موثرترین منعقدکننده پلی فریک سولفات بوده که در pH بازی نتیجه بهتری را نشان می دهد. با توجه به نتایج بدست آمده می توان روش انعقاد وکواگولاسیون را روشی مناسب و ارزان قیمت جهت پیش تصفیه شیرابه حاصل از کارخانه کمپوست اصفهان و آماده سازی آن برای تصفیه بهتر و مناسب تر باروش های دیگر معرفی نمود.
    کلید واژگان: پسماند، ترسیب شیمیایی، TSS، COD، اصفهان، شیرابه کمپوست، منعقد کننده
    Gh Kiani, Ah Mahvi, Mh Dehghani, R. Nabizadeh
    Introduction
    Untreated leachate is being discharged into the environment in many countries worldwide. Leachate treatment methods have not been unified so far due to variable composition of leachate in different sites. Lack of control as well as disregarding leachate treatment and disposal of it can cause environmental pollution. This study aimed to investigate the Coagulant's effect on the COD (Chemical Oxygen Demond) and TSS(Total Suspended Solids) removal from Isfahan composting leachate. Ferrous sulfate, Ferric chloride,Poly ferric sulfate, Alum and Poly aluminium chloride were used in addition to two cationic and anionic commercial co-coagulants.
    Methods
    In this experimental study, leachate samples were collected from the Isfahan composting leachate collection ponds. At first, Leachate characteristics were measured according to standard methods. Jar-test experiments were carried out to examine the effects of changing coagulants ' dosage (0/5,1,1/5,2,2/5 and 3 g/l) and PH values (4,5,6,7,8,9,11 and 12) on COD and TSS removal. As a result, the effective dosage, optimum pH and the most convenient coagulant were identified.
    Results
    According to the results, polyferric sulfate reached the highest COD and TSS removal efficiency were at pH= 11, with 2 g/L of poly ferric sulfate, the COD removal efficiency was 49% while the dosage of 2.5 g/l of this coagulant levelled at 51% of TSS removal efficiency.The co-coagulant K350CF, while used along with polyferric sulfate, reached the highest level in COD and TSS removal efficiencies which were 53% and 52% respectively.The highest COD removal efficiency using co-coagulant LT25 was related to poly-aluminum chloride, equal to 49%.
    Conclusion
    The most effective coagulant for COD and TSS removal was polyferric sulfate which contributed to better results with an alkaline pH. From the results obtained, it may be stated that Coagulation-flocculation can be used as a convenient inexpensive pretreatment process to treat Isfahan composting leachate, processing the leachate for a better and more convenient treatment compared with other methods.
    Keywords: Waste, Chemical Precipitation, COD, TSS, Isfahan, Compost Leachate, Coagulant
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال