Numerical Simulation of a Tubular Solid Oxide Fuel Cell with FLUENT and Comparison the Results with COMSOL Multiphysics
Author(s):
Article Type:
Research/Original Article (دارای رتبه معتبر)
Abstract:
In an attempt to achieve efficient operation with respect to design and combined thermal and electrochemical perspective, a computational model of tubular SOFC is presented. The FLUENT software was used for the development of the model. The particular model, after validation against experimental observations for selected benchmark cases, was demonstrated to be a basic model for further research in this area. For validation of obtained result, i.e. COMSOL Multiphysics, was used which is based on Finite Element Method (FEM). The results showed that the difference of them is less than of 6% for power density and less than 7% for output voltage and so both software are acceptable.
Keywords:
Language:
Persian
Published:
Journal of Mechanical Engineering, Volume:47 Issue: 1, 2017
Pages:
37 to 46
https://www.magiran.com/p1713319
سامانه نویسندگان
مقالات دیگری از این نویسنده (گان)
-
Numerical simulation of heat pipe-PEM fuel cell coupling and investigating the effect of geometrical parameters on the thermal performance of fuel cell
*, Mahdi Mortazavi, Elnaz Zohravi
Journal of Applied and Computational Sciences in Mechanics, Spring 2025 -
Hydrogen energy, PEM electrolyzer, Electrochemical compressor, Photovoltaic system, Natural gas pipeline
Mohamadreza Zayandehroodi, *, Mahdi Mosharaf Dehkordi
Amirkabir Journal Mechanical Engineering,