Effect of the addition of bagasse and imported long fiber chemical pulps on the properties of chemical-mechanical pulp produced from hornbeam, beech and poplar mixture
Message:
Abstract:
The aim of this study is to investigate the properties of pulp produced by the admixture of wood and non-wood fibers. The mixture of hardwoods chemical-mechanical pulp (60% hornbeam, 20% beech and 20% poplar) of Mazandaran factory with bagasse industrial pulp of Pars factory (non-wood fibers) with ratios of 65 to 20, 55 to 30, 45 to 40, 35 to 50, 15 to 70, respectively were used. Every mixture of pulps was reinforced with 15 percent of the imported long fiber bleached softwood kraft pulp. Pulp properties such as fiber length, ash percent and freeness were determined. Hand-sheets were made and the properties such as brightness, porosity, tensile and burst indices, breaking length, and tear index were measured. The results of the length distribution of fibers showed that the CMP of Mazandaran wood and paper factory has a better quality than the bagasse chemical pulp of Pars Company. The statistical analysis of the results showed that the properties of hand-sheets such as burst index, tear index and brightness decrease with increasing the amount of bagasse pulp, except for the tensile index, which has not changed significantly. Also, with increasing the amount of bagasse pulp, the porosity property was decreased.
Article Type:
Research/Original Article
Language:
Persian
Published:
Iranian Journal of Wood and Paper Industries, Volume:10 Issue:1, 2019
Pages:
143 - 152
magiran.com/p1998301  
روش‌های دسترسی به متن این مطلب
اشتراک شخصی
در سایت عضو شوید و هزینه اشتراک یک‌ساله سایت به مبلغ 300,000ريال را پرداخت کنید. همزمان با برقراری دوره اشتراک بسته دانلود 100 مطلب نیز برای شما فعال خواهد شد!
اشتراک سازمانی
به کتابخانه دانشگاه یا محل کار خود پیشنهاد کنید تا اشتراک سازمانی این پایگاه را برای دسترسی همه کاربران به متن مطالب خریداری نمایند!