به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
فهرست مطالب نویسنده:

mohammadali ansari

  • محمدعلی انصاری*، انیس میسمی
    مقدمه

    دستگاه درماتوسکوپ ابزاری است که با فراهم  آوردن نمایی بزرگ از لکه های پوستی می تواند در تشخیص بهتر بیماری های پوستی از جمله سرطان خطرناک ملانوما تاثیرگذار باشد. افزودن یک ابزار نرم افزاری با قابلیت پردازش، تحلیل و در نهایت تشخیص لکه های پوستی می تواند به عنوان دستیار پزشک متخصص پوست عمل کند. در این مقاله، به معرفی نرم افزاری با عنوان Optoskin ورژن یک که به عنوان رابط کاربری گرافیکی درماتسکوپ ساخته شده در آزمایشگاه تصویربرداری نوری دانشگاه شهید بهشتی و با حمایت شرکت پرتو آوای اطلس است، می پردازیم.

    روش بررسی

    این نرم افزار ضمن فراهم آوردن امکان تصویربرداری از پوست، به پردازش تصاویر گرفته شده پرداخته و بر اساس الگوریتم ABCD شاخص های مهم یک لکه پوستی شامل تقارن، بی نظمی مرزی، رنگ و قطر را اندازه گیری می کند. برای اندازه گیری هر یک از این شاخص ها ابتدا تصاویر پیش پردازش شده و بعد از یافتن مرزهای لکه، با کمک الگوریتم های طراحی  شده در این نرم افزار ویژگی های ظاهری ضایعه پوستی شناسایی می شود.

    یافته ها

    برای آزمودن عملکرد نرم افزار نیز از داده های تجربی و داده های موجود در دیتاست های HAM10000 و PH2استفاده شده است. در نهایت، با کمک این نرم افزار به 67% درستی تشخیص، 72% حساسیت و 61% شاخص ویژگی دست یافتیم.

    نتیجه گیری

    نرم افزار Optoskin برای پردازش و تجزیه و تحلیل تصاویر درماتوسکوپی طراحی شده است و می تواند به طور خودکار شاخص های مهمی مانند عدم تقارن، بی نظمی مرز، رنگ و قطر ضایعات را بر مبنای قانون ABCD اندازه گیری کند. این نرم افزار همچنین قادر به طبقه بندی هوشمند ضایعات ملانومایی و خوش خیم است. هنگام آزمایش با داده های واقعی و مجموعه داده های استاندارد،  Optoskin اثربخشی بالا، با دقت، حساسیت و ویژگی قابل توجه نشان داده است

    کلید واژگان: درماتوسکوپی، پردازش تصویر، آنالیز تصویر، Optoskin V.0.1.Beta‎، الگوریتم ABCD، تشخیص ملانوما
    Mohammad Ali Ansari*, Anis Meisami
    Introduction

    Dermoscopes are key in dermatology for magnifying skin lesion images, which is crucial for diagnosing diseases such as melanoma. Adding software that processes and analyzes these images significantly aids dermatologists. This article presents Optoskin version 1, software that provides a graphical interface to enhance dermoscopes, developed at Shahid Beheshti University's Optical Imaging Laboratory and supported by the Parto Ava Atlas Company.

    Method

    This software is not only captures images of the skin but also processes them to analyze key features of skin lesions. By applying the ABCD algorithm, it measures symmetry, border irregularity, color, and diameter. After preprocessing the images and locating the lesion's edges, the software uses specialized algorithms to identify its visual characteristics.

    Findings

    we assess this software's effectiveness using real-world data and information from datasets like HAM10000 and PH2. The software demonstrated a solid performance, with a detection accuracy of 67%, a sensitivity of 72%, and a specificity of 61%.

    Conclusion

    Optoskin is designed to process and analyze dermatoscopic images. It automatically measures critical indices such as asymmetry, border irregularity, color, and diameter of lesions using the ABCD algorithm. The software also automatically classifies lesions as benign or malignant. When tested with real data and standard datasets, Optoskin has shown high effectiveness, with substantial accuracy, sensitivity, and specificity.

    Keywords: Dermatoscopy, Image Processing, Image Analysis, Optoskin V.0.1.Beta, ABCD Algorithm, Melanoma Diagnosis
  • محمدعلی انصاری*، سعید ضیائی، وحید قطبی ملکی، صمد نژادابراهیمی
    مقدمه

    امروزه شفاف سازی بر روی بافت های زیادی بخصوص پوست صورت بالینی و آزمایشگاهی می گیرد. مواد تشکیل  دهنده بافت که عمدتا پروتئین ها، لیپید ها، آب میان بافتی و عروق خونی است، باعث پراکندگی شدید نور شده و نفوذ نور به اعماق بافت را محدود می کنند. این محدودیت باعث عدم دستیابی به اطلاعات ساختاری و تشکیل دهنده بافت توسط نور و کاهش در وضوح تصویربرداری نوری می شود. در این مطالعه با استفاده از شفاف  سازهای مبتنی بر پلیمر نیمه  طبیعی HPMC  و سوربیتول و با بکارگیری روغن نارگیل، توئین 20 (که به اختصار CSC1 و CSC2 نامیده شدند)، پارامتر های اپتیکی نمونه بافت پوست توسط روش طیف نشر بازتابی (DRS) مورد بررسی قرار گرفت.

    مواد و روش ها

    برای بدست  آوردن طیف های بازتابی و عبوری بافت از روش طیف سنجی نشر بازتابی (DRS) استفاده شده است. سپس با استفاده از مقادیر بدست آمده و جایگذاری در رابطه کرامرز -کرونیگ می توان ضریب شکست را قبل و بعد از اعمال شفاف ساز بدست آورد. همچنین پارامتر های اپتیکی دیگر نظیر ضریب جذب، ضریب تضعیف کل و ضریب انتشار از طیف های بازتابی و عبوری محاسبه شده است.

    یافته ها

    تاثیر استفاده از دو محلول پیشنهادی روی تغییرات ضریب شکست، ضریب جذب و ضریب انتشار محلول های شفاف ساز در فرایند شفاف سازی پوست موش بررسی شد.

    نتیجه گیری

    می توان گفت که پلیمر نیمه  طبیعی HPMC در حفظ ساختار محلول شفاف ساز نقش موثری داشته است. از این رو می توان نتیجه گرفت که محلول CSC2 شفاف سازی را بهتر انجام داده و در نهایت نور بیشتر به بافت نفوذ خواهد کرد.

    کلید واژگان: شفاف‎ساز اپتیکی، خواص اپتیکی پوست، کرامرز - کرونیگ
    Mohammad Ali Ansari*, Saeed Ziyaee, Vahid Ghotbi Maleki, Samad Nezhad Ebrahimi
    Introduction

    The skin is considered the first barrier against the penetration of laser light into the body, which causes limitations in imaging or treatment with laser light. The constituents of the skin, which are mainly proteins, lipids, interstitial water, and blood vessels, cause severe light scattering and limit the penetration of light into the deep tissues. This limitation causes the lack of access to structural information and tissue constituents by light and a decrease in the resolution of optical imaging. In this study, using semi-natural HPMC polymer, sorbitol, coconut oil and Tween 20 (called CSC1 and CSC2 for short), the optical parameters of the skin tissue sample were determined by the diffuse reflection spectrum (DRS) method.

    Research method

    DRS was used to obtain the reflection and transmission spectra of the tissue. Then, by using the obtained values and placing them in the Kramers-Kronig relationship, the refractive index can be obtained before and after applying optical clearing agent. Also, other optical parameters such as absorption coefficient, total attenuation coefficient and diffusion coefficient have been calculated from reflection and transmission spectra.

    Findings

    The effect of using optical clearing agent (CSC1, CSC2) on variation of optical properties of sample (refractive index, absorption coefficient, and diffusion coefficient) are measured.

    Conclusion

    The results show that the semi-natural HPMC polymer, which played a role in maintaining the structure of the solution, was effective. Therefore, it can be concluded that the CSC2 could better clear the sample, and it improves the optical depth.

    Keywords: Optical Clearing Agent, Optical Properties Of Skin, Kramers-Kronig
  • محمدعلی انصاری*، مرتضی عرب، عباس حیدری

    یکی از مسایل دانش کلام اسلامی بررسی ماهیت و چیستی کلام الهی است و راجع به این مقوله از قرن دوم هجری نظریاتی توسط متکلمان اسلامی شکل گرفته است. یکی از نظریات مطرح در این حوزه را متکلمانی مطرح کردند که با الگوگیری از فلسفه افلاطونی و ایده عالم مثال، برای کلام الهی جنبه ای مثالی و خارج از عالم ماده در نظر گرفته اند. این تبیین فلسفی پس از نظریه پردازی هایی که معتزله از آن ارایه دادند درنهایت در قرن چهارم توسط ابوالحسن اشعری تایید و در مقوله فرعی بحث کلام الهی؛ یعنی اعجاز، به نظریه کلام نفسی بدل شد.این جستار بر طبق مبانی تاریخ علم و اندیشه درصدد بررسی تاریخی زمینه های شکل گیری، سیر تحول و تطور اندیشه کلام نفسی به عنوان اندیشه ای فلسفی است. روش پژوهش بر اساس الگوی پارادایمی توماس کوهن است و نتیجه حاصل از آن نشان دهنده این مطلب است که متکلمان معتزلی پس از آشنایی با الگو های تفکر افلاطونی با به کارگیری آن ها، تبیینی فلسفی از وجود مثالی قرآن کریم ارایه کردند تا اینکه ابوالحسن اشعری در پارادایمی ویژه، خوانش های دینی از فلسفه افلاطونی را به کار بست و در تقابل پارادایمی اهل حدیث و اهل کلام، به نظریه کلام نفسی در اعجاز قرآن کریم دست یافت.

    کلید واژگان: کلام الهی، اعجاز قرآن، اشاعره، کلام نفسی، مثل افلاطونی
    Mohammad Ali Ansari *, Morteza Arab, Abbas Heidari

    One of the issues of the Islamic Kalām (scholastic theology) is the investigation of the nature and essence of the divine word. Concerning this subject, since the second century AH, several views have been proposed by Muslim theologians. One of these theories was put forward by those theologians who followed the model of Platonic philosophy and the view on the world of Ideas and consequently considered ideal aspects outside of the material world for the divine word. Ultimately, after the Mu'tazilites' theorizations, this philosophical explanation was confirmed by Abu al-Hassan al-ʾAshʾarī in the fourth century; so, in the sub-category of the issue of the divine word, namely inimitability, it turned into the theory of Kalām Nafsī. According to the principles of the history of science and thought, and based on Thomas Cohen's method, this study tries to investigate, historically, the grounds of the formation, as well as the evolution of Kalām Nafsī as a philosophical thought. The results show that after getting acquainted with the patterns of Platonic thought, the Mu'tazilite theologians used them and therefore, philosophically explained the ideal existence of the Holy Qur'an. Finally, Abul-Ḥasan ʾAshʿarī used the religious readings of Platonic philosophy in a particular paradigm, and in the paradigmatic opposition between the traditionists and the theologians, achieved the theory of the Kalām Nafsī in the inimitability of the Holy Qur'an.

    Keywords: Divine word, Inimitability of the Quran, Ashʿarites, Kalām Nafsī, Platonic examples
  • محمدعلی انصاری، اصلان اگدرنژاد*، نیازعلی ابراهیمی پاک
    گیاه سیب زمینی پنجمین منبع غذایی جهان به شمار می رود که در کشور ما نیز در سطح وسیعی کشت می شود. با توجه به حساسیت این گیاه زراعی به مقدار آب آبیاری، لازم است اثر مقادیر مختلف آبیاری بر عملکرد آن در مناطق مختلف بررسی شود. بر این اساس انجام آزمایش-های مزرعه ای الزامی لیکن دشوار، زمان بر و پرهزینه می باشد. بدین منظور، از مدل SWAP به عنوان ابزاری قدرتمند برای شبیه سازی سیب زمینی استفاده شد. در این پژوهش برای ارزیابی این مدل، از داده های زراعی دو ساله برداشت شده از یک مزرعه تحقیقاتی در چهارتخته شهرکرد استفاده شد. این داده ها شامل پنج سطح تنش آبی (E0، E1، E2، E3 و E4 به ترتیب نشان دهنده ی 100، 85، 70، 50 و 30 درصد تامین نیاز آبی) و سه زمان اعمال تنش (T1، T2 و T3 به ترتیب نشان دهنده ی 50 روز رشد اول (استقرار بذر و رشد رویشی)، دوم (رشد کامل) و سوم (رسیدن گیاه) از کل دوره رشد گیاه بود. مقادیر آماره NRMSE برای عملکرد و کارایی مصرف آب نشان داد که مدل SWAP در هر دو دوره واسنجی و صحت سنجی دقت عالی داشت (1/0 < NRMSE). خطای این مدل برای شبیه سازی عملکرد در مراحل واسنجی و صحت سنجی به ترتیب برابر با 42/1 تن در هکتار (6/4 درصد) و 36/2 تن در هکتار (2/7 درصد) بود. مقدار خطای این مدل برای کارایی مصرف آب در دو مرحله ی اشاره شده به ترتیب 04/0 کیلوگرم بر مترمکعب (9/4 درصد) و 33/0 کیلوگرم بر مترمکعب (7/7 درصد) بود. همچنین کارایی مدل SWAP برای شبیه سازی سیب زمینی در دوره های واسنجی و صحت سنجی قابل قبول بود. برنامه ریزی آبیاری سیب زمینی با استفاده از مدل SWAP نشان داد که برای دستیابی به بیشترین عملکرد، بهتر است عمق آب آبیاری در دوره اول رشد برابر با 750 میلی متر و در دوره های بعدی 900 میلی متر باشد.
    کلید واژگان: تنش آبی، کارایی مصرف آب، عمق آب آبیاری، مدل SWAP
    MohammadAli Ansari, Aslan Egdernezhad *, Niazali Ebrahimipak
    Potato is the fifth largest food source in the world, which is widely cultivated in Iran. Due to the sensitivity of this crop to the amount of irrigation water, it is necessary to investigate the effect of different amounts of irrigation on it. For this purpose, SWAP model was used as a powerful tool for potato simulation. At first, to evaluate this model, biennial data (1998-1999) collected from a research station in ChaharTakhteh, Shahrekord were used. These data include five levels of water stress (E0, E1, E2, E3 and E4, respectively, indicating 100, 85, 70, 50 and 30% water supply) and three stress application times (T1, T2, and T3 indicating 50, 100, and 150 days after sowing, respectively). NRMSE values for yield and water use efficiency showed that SWAP model in both calibration and validation were excellent (NRMSE < 0.1). The error of this model for simulating yield in the calibration and validation stages was equal to 1.42 ton.ha-1 (4.6 percent) and 2.36 ton.ha-1 (7.2 percent), respectively. The error value of this model for water consumption efficiency in the mentioned two stages was 0.04 kg.m-3 (4.9%) and 0.33 kg.m-3 (7.7%), respectively. The efficiency of the SWAP for potato simulation during calibration and validation was acceptable. Potato irrigation planning using SWAP showed that to achieve maximum yield, the irrigation water depth in the first growing period is equal to 750 mm and irrigation depths are 900 mm in subsequent periods.
    Keywords: Irrigation Water Depth, SWAP model, water stress, Water Use Efficiency
  • انیس میسمی، محمدعلی انصاری*
    مقدمه

    تصویربرداری پخش نوری یک تکنیک تصویربرداری غیرتهاجمی و غیرمخرب است که از امواج الکترومغناطیسی در محدوده ی طول موجی فروسرخ نزدیک برای اندازه گیری ویژگی های اپتیکی بافت زیستی نظیر جذب و پراکندگی از مرزهای محیط استفاده می کند. عواملی چون پراکندگی بسیار زیاد نور در بافت های زیستی و تعداد محدود اندازه گیری ها سبب شده مسیله ی بازسازی تصویر در این تکنیک چالش برانگیز شود. اخیرا شبکه های عصبی ژرف به حوزه بازسازی تصویر وارد شده اند و توانسته اند عملکرد بسیار خوبی از خود نشان دهند. در این پژوهش، روشی جدید برپایه ی یادگیری ژرف برای حل این مسیله ارایه شده است.

    روش بررسی

    برای پیاده سازی این روش با استفاده از شبیه سازی رایانه ای، بافت هایی مکعبی شکل با ابعاد 64×64×64 mm3  با تومورهایی در عمق 21 تا 42 میلی متری ایجاد گردید. برای اندازه گیری از مرز بافت، شبکه ای 5×5  از منابع و آشکارسازها در طرفین بافت تعبیه کردیم. برای انجام عمل بازسازی، دو شبکه عصبی ژرف با معماری کاملا متصل و کانوولوشنی دوبعدی ایجاد نمودیم.

    یافته ها:

     برای سنجش کارایی این الگوریتم ها، عملکرد آن ها را با یکی از روش های کلاسیک برپایه ی مدل یعنی روش گرادیان مزدوج مقایسه کردیم. برای مقایسه ی این روش ها از معیارهایی چون میانگین خطای مطلق (MAE)، خطای حداقل مربعات (MSE)، بیشینه سیگنال به نویز  (PSNR) و شاخص شباهت ساختاری  (SSIM) استفاده شد. نتایج به دست آمده نشان داد که   MSEبه صورت میانگین 86 درصد و MAE تا 81 درصد کاهش داشته و PSNR  2 برابر افزایش یافته است.

    نتیجه گیری: 

    نتایج این پژوهش نشان داد که استفاده از شبکه های مصنوعی ژرف در مقایسه با روش های بازسازی کلاسیک جهت یازسازی تصاویر پخش نوری می تواند موجب بهبود کیفیت تصاویر به دست آمده شود.

    کلید واژگان: تصویربرداری زیستی نوری، تصویربرداری پخش نوری، یادگیری ماشین، یادگیری ژرف، هوش مصنوعی، مسئله معکوس، بازسازی تصویر
  • نیازعلی ابراهیمی پاک*، اصلان اگدرنژاد، آرش تافته، محمدعلی انصاری

    برنامه ریزی آبیاری و تامین نیاز کود نیتروژن تاثیر زیادی بر عملکرد و کارایی مصرف آب گوجه فرنگی دارد. لیکن به دلیل هزینه بر و زمان بر بودن انجام آزمایش های مختلف، برای دستیابی به مناسب ترین میزان آب آبیاری و کود نیتروژن، می توان از مدل های رشد گیاهی مانند AquaCrop استفاده کرد. بدین منظور از داده های جمع آوری شده از یک مزرعه آزمایشی در اسماعیل آباد قزوین طی دو سال زراعی استفاده شد. اثر مقدار آبیاری در چهار سطح (E1: 50، E2: 75، E3: 100 و E4: 125 میلی متر تبخیر از تشت تبخیر کلاس A) و مقدار کود مصرفی در سه سطح (F1: 70 درصد نیاز کودی، F2: 100 درصد نیاز کودی گیاه و F3: 40 درصد نیاز کودی) بر عملکرد گوجه فرنگی در نظر گرفته شد. ابتدا مدل AquaCrop تحت شرایط بدون تنش کودی و با استفاده از داده های سال اول واسنجی شد. سپس از تیمار F3 در سال اول و دوم برای واسنجی این مدل تحت شرایط کودی (40 درصد نیاز کودی) استفاده شد. نتایج نشان داد که همبستگی بالایی بین مقادیر مشاهداتی و شبیه سازی شده عملکرد (R2=0.915) و کارایی مصرف آب (R2=0.893) وجود داشت. نتایج مقایسه مقادیر مشاهداتی و شبیه سازی شده توسط آماره های میانگین خطای اریب، جذر میانگین مربعات خطا و جذر میانگین مربعات نرمال شده نشان داد که دقت این مدل برای تعیین هر دو پارامتر عملکرد و کارایی مصرف آب قابل قبول بود. مقادیر این آماره ها برای عملکرد به ترتیب برابر با 02/0- (تن بر هکتار)، 42/0 (تن بر هکتار) و 07/0 و برای کارایی مصرف آب به ترتیب برابر با 01/0- (کیلوگرم بر مترمکعب)، 02/0 (کیلوگرم بر مترمکعب) و 03/0 بود. با توجه به مقادیر کارایی مدل AquaCrop در شبیه سازی عملکرد (41/0) و کارایی مصرف آب  (19/0)، استفاده از این مدل برای شبیه سازی عملکرد و کارایی مصرف آب گوجه فرنگی تحت شرایط مختلف آبیاری و کود مصرفی پیشنهاد می شود.

    کلید واژگان: تنش کودی، سناریوهای کم آبیاری، کارایی مصرف آب، مدل رشد گیاهی
    Niazali Ebrahimipak *, Aslan Egdarnejad, Arash Tafteh, MohammadAli Ansari

    Irrigation water and nitrogen fertilizer management have an effective effect on tomato yield and water use efficiency. So, it is important to know the best amount of irrigation and nitrogen fertilizer for tomato cultivation. Since doing farm researches need time and funds, it is necessary to use crop growth models like AquaCrop. Regarding that, data collected from Ismaeel Abad research station was used. The study was conducted there, irrigation was considered as four levels (E1: 50, E2: 75, E3: 100, and E4: 125 mm evaporation from pan class A) and fertility uses was considered as three levels (F1: 70, F2:100, and F3: 40 percent as fertility needed). At first, AquaCrop was calibrated without considering any fertility stresses using first year data. Then, F3 treatment in the first and second year was used to calibrate AquaCrop for fertility stress (40 percent as fertility needed). Results showed high correlation between observation and simulation values for yield (R2=0.915) and water use efficiency (R2=0.893). MBE, RMSE and NRMSE values showed a good precision for the model. The mentioned values were -0.02 (ton.ha-1), 0.42 (ton.ha-1) and 0.07 for yield, respectively, and -0.01 (ton.ha-1), 0.02 (ton.ha-1) and 0.03 for water use efficiency, respectively. Due to AquaCrop efficiency for simulating tomato yield (EF=0.41) and water use efficiency (EF=0.19), it is recommended to use AquaCop for simulating tomato yield and water use efficiency.

    Keywords: Fertility Stress, Deficit Irrigation Scenarios, Water Use Efficiency, crop growth model
  • محمدعلی انصاری*، مرتضی عرب، عباس حیدری

    چیستی اعجاز قرآن کریم، از قرن سوم قمری، به طور جدی مورد توجه اندیشمندان معتزلی قرار گرفت. صرفه یکی از نظریاتی است که برخی از معتزله بغداد نظیر نظام برای بیان یگانگی قرآن کریم مطرح کردند. هدف از این پژوهش پاسخ به این سوال است که در قرن سوم، چه الگوهایی دانشمندان معتزلی را به بحث درباره اعجاز قرآن کریم و به طور خاص نظریه صرفه هدایت کرد. به این منظور از روش تحلیل پارادایم کوهن استفاده شد و ضمن شناسایی الگوهای غالب، رابطه میان نظریه صرفه و الگوهای موجود مورد بررسی قرار گرفت. نتایج پژوهش نشان دهنده وابستگی و تاثیرپذیری متقابل بین پارادایم ها و گفتمان های غالب بر بافت جامعه اسلامی در آن زمان است. بررسی های تاریخی دیگر نیز نشان می دهد که رویارویی گفتمان مرجعیت علمی قرآن کریم با پرسش های گفتمان جدید، زمینه بروز پارادایمی را ایجاد کرد که منجر به بحث در مورد چیستی وجه یگانگی قرآن کریم شد. افزون بر این، نظام با گرایش به الگوی ارسطویی، ایده خود را در باب اعجاز قرآن کریم، در تقابل با طرفداران الگوی افلاطونی تشریح کرد و قدمت و تعبیر افلاطونی از جایگاه قرآن را منتفی دانست. او همچنین بر اساس الگوی علم یونانی، وجود هرگونه اعجوبه در متن کلام الله را انکار کرد و برای صورت گفتاری اعتبار بیشتری قایل شد.

    کلید واژگان: اعجاز قرآن، نظریه صرفه، نظام، تحلیل الگوواره
    MohammadAli Ansari *, Morteza Arab, Abbas Heidari

    The miraculous nature of the Holy Quran, from the third century AH, has been the subject of serious attention by Mu'tazilite scholars. Sarfa is one of the theories put forward by some Baghdad Mu'tazilites, such as Nazzām, to demonstrate the uniqueness of the Holy Qur'an. This investigation seeks to answer the question “What patterns have led the Mu'tazilite scholars in the third century to discuss the miracle of the Holy Qur'an and in particular the theory of Sarfa?” For this purpose, Cohen's paradigmatic analysis method is adopted and while identifying the dominant patterns, the relationship between the theory of Sarfa and existing models are explored. The results suggest the interdependence and interaction between the paradigms and discourses governing the Islamic society at that time. Other historical studies also exhibit that when the scientific discourse of the Holy Quran met the questions raised in the new discourse, this gave rise to a paradigm that sparked a discussion about the nature of the Holy Quran’s uniqueness. In addition, inspired by the Aristotelian model, Nazzām presented his theory of ​​the miraculous nature of the Holy Qur'an in response to the proponents of the Platonic model, ruling out Platonic interpretation of the status of the Qur'an. Also, based on the Greek model of science, he repudiated the existence of any miracle in the text of the Quran, placing more emphasis on the verbal form.

    Keywords: Quran miracle, theory of Sarfa, Nazzām, paradigmatic analysis
  • آیدین حمیدی*، سیاوش کریمی مزیدی، مهرداد اسماعیلی مزیدی، محمدعلی انصاری، شهاب سرافرازی، مسعود حکیمی، رابعه رضائیان، زرین منفرد، فاطمه خلقتی بنا، حسن ملکی زیارتی، کامران رهنما

    به منظور تعیین ارزش زراعی و مصرف (VCU) ارقام جدید خارجی پنبه در استان فارس (داراب)، ارزیابی عملکرد وش و اجزای آن، زودرسی و کیفیت الیاف انجام شد. شش رقم خارجی جدید پنبه مورد بررسی شامل ارقام  کاریزما، لیدیا، PG2018، BA440، 5- فلش و ادسا و صفات مورد بررسی عملکرد وش، تعداد قوزه در هر بوته، وزن تک قوزه، زودرسی، کیل، طول، ظرافت، کشش، استحکام، یکنواختی، زردگی و درخشندگی الیاف بودند. نتایج نشان داد صفات مورد بررسی تحت تاثیر شرایط محیط در سال های اجرای آزمایش قرار گرفت. ارقام جدید خارجی کاریزما در سال اول و رقم فلش در سال دوم به ترتیب دارای بیشترین عملکرد وش و کیل الیاف بودند. رقم PG2018 زودرس ترین رقم بود. رقم شاهد گلستان دارای بیشترین طول الیاف و ظریف ترین الیاف و رقم جدید خارجی لیدیا دارای بیشترین استحکام، یکنواختی و درخشندگی الیاف بودند. براساس نتایج آزمون ارقام جدید خارجی کاریزما، لیدیا و PG2018 قابل توصیه برای کاشت در استان فارس می باشند.

    کلید واژگان: معرفی رقم، تجاری سازی رقم، طول و ظرافت الیاف، درخشندگی الیاف
    AIDIN HAMIDI *, Siavash Karimi Mazidi, Mehrdad Esmaeili Mazidi, MohammadAli Ansari, Shahab Sarfarazi, Masoud Hakimi, Rabei Razaian, Zarrin Monfared, Fateme Khelghati Bana, Hassan Maleki Ziarati, Kamran Rahnama

    In order to determination Value of Cultivation and Use (VCU) of Cotton new foreign cultivars in Fars province (Darab), seed cotton yield and its components, earliness and fiber quality were evaluated. Cotton six new foreign cultivars included Carisma, Lydia, PG2018, BA440, Flash and Edesa and studied traits were seed cotton yield, boll number of each plant, boll weight, earliness, lint percent, fiber length, fitness, elasticity, strength, uniformity, yellowness and brightness. Results showed studied traits affected by environment conditions during trial conduction years. New foreign cultivars Carisma in first year and Lydia in second years had the highest seed cotton yield and lint percent respectively. PG2018 were the earliest cultivar. Golestan control cultivar had the most fiber length and fittest fiber and Lydia new foreign cultivar had the highest fiber strength, uniformity and brightness. Based on trial results new foreign cultivars, Carisma, Lydia and PG2018 are recommendable for cultivation in Fars province. Cotton six new foreign cultivars included Carisma, Lydia, PG2018, BA440, Flash and Edesa and studied traits were seed cotton yield, boll number of each plant, boll weight, earliness, lint percent, fiber length, fitness, elasticity, strength, uniformity, yellowness and brightness. Results showed studied traits affected by environment conditions during trial conduction years. New foreign cultivars Carisma in first year and Lydia in second years had the highest seed cotton yield and lint percent respectively.

    Keywords: Cultivar introduction, Cultivar Commercialization, Fiber length, fitness, Fiber brightness
  • حسن تجره نژاد عبداللهی، محمدعلی انصاری*
    مقدمه

    یکی از روش های جدید در بررسی فعالیت های عصبی استفاده از نور لیزر فروسرخ است. با توجه به بازده بالای نور - گرمایی در ناحیه طیف فروسرخ، استفاده از خاصیت نور - گرمایی می تواند باعث تاثیرگذاری بر سیستم عصبی شود. در این مقاله ما به بررسی ساز و کار تحریک عصبی فروسرخ و دو عامل میزان تغییرات دما و اندازه طول پالس بر آن می پردازیم.

    روش بررسی

    برای شبیه سازی بافت های عصبی و بررسی تاثیر خاصیت نور - گرمایی بر آن ها دو نوع آکسون مایلین دار و غیرمایلین دار را با استفاده از نرم افزار طراحی عصبی نورون طراحی کردیم و با فرض ظرفیت غشاء به عنوان یک پارامتر متغیر وابسته به دما به بررسی اندازه های مختلف میزان تغییرات دما در طول های زمانی مختلف پرداختیم و با اعمال آن به نمونه عصبی مورد نظر پاسخ عصبی آن ها را ثبت کردیم. پاسخ های عصبی شامل میزان تولید جریان الکتریکی توسط پالس فروسرخ، میزان تغییرات ولتاژ و امکان تولید پتانسیل عمل و همچنین واکنش کانال های سدیم و پتاسیم به این تغییرات دما بودند.

    یافته ها

    با اعمال تغییرات دما در اندازه های متفاوت به آکسون مایلین دار طراحی شده مشخص شد که آستانه دمایی برای تحریک عصبی این نوع آکسون های عصبی با افزایش دمای 5/10 درجه سانتی گراد اتفاق می افتد به این صورت که تغییر 4/10 درجه سانتی گرادی دما بر روی نمونه باعث تغییرات ولتاژ بسیار اندک شد اما، با افزایش دمای 5/10 درجه سانتی گراد پتانسیل عمل با موفقیت تولید شد در حالی که میزان تفاوت میزان جریان الکتریکی تولید شده توسط آن ها در حدود 130 میکروآمپر بود. در آکسون غیرمایلین دار تغییرات دما به اندازه 5، 7/6، 9/6 و 10 درجه سانتی گراد به نمونه طراحی شده اعمال شد و مشاهده شد که در دماهای کمتر از 9/6 درجه سانتی گراد امکان تولید پتانسیل عمل وجود ندارد. برای بررسی تاثیر طول پالس بر میزان تحریک عصبی، 10 درجه سانتی گراد افزایش دما که در پالس 1 میلی ثانیه ای موفق به تولید پتانسیل عمل شده بود را در پالس هایی با طول زمانی 2، 3، 4 و 5 میلی ثانیه ای دوباره اعمال کردیم و مشاهده کردیم که در پالس های بیش از 3 میلی ثانیه تغییرات گرما نمی تواند به عنوان یک عامل محرک عصبی موفق عمل کند. در مورد تاثیر افزایش دما بر روی کانال های یونی یک پالس یک میلی ثانیه ای با افزایش 10 درجه سانتی گراد دما اعمال کردیم که باعث فعال سازی هر دو کانال یونی سدیم و پتاسیم شد اما، مشاهده شد که کانال یونی پتاسیم در حدود 155 میکروثانیه دیر تر فعال می شود.

    نتیجه گیری

    نتایج به دست آمده نشان داد که تغییر دما عامل اصلی در ایجاد تحریک عصبی فروسرخ است اما، به تنهایی نمی تواند باعث تحریک عصبی و در نتیجه تولید پتانسیل عمل شود. اندازه تغییر دما باید به حدی باشد که از آستانه دمایی تحریک عصبی عبور کرده باشد و به صورت همزمان، این تغییر دما باید در مدت زمانی کمتر از آستانه تحریک زمانی اتفاق بیفتد. در صورتی که این شرایط در هنگام فرآیند تحریک عصبی فروسرخ برقرار نباشد، تولید پتانسیل عمل ممکن نخواهد بود.

    کلید واژگان: تحریک عصبی فروسرخ، نورون، ظرفیت غشاء
    Hasan Tajarehnejad Abdollahi, Mohammadali Ansari*
  • محمدعلی انصاری، اصلان اگدرنژاد*، نیازعلی ابراهیمی پاک

    با توجه به اهمیت گیاه سیب زمینی، شبیه سازی عملکرد آن تحت تنش های آبی با استفاده از مدل های شبیه سازی رشد گیاهی به محققان کمک می کند تا برنامه ریزی بهتری برای آبیاری آن انجام دهند. بدین منظور، این تحقیق برای ارزیابی دقت دو مدل آب محور AquaCrop و کربن محور WOFOST در شبیه سازی عملکرد سیب زمینی تحت شرایط کم آبیاری در مراحل مختلف رشد انجام شد. از این رو، داده های برداشت شده از یک مزرعه تحقیقاتی در چهارتخته شهرکرد در دو سال زراعی (1378-1377) مورد استفاده قرار گرفت. این داده ها شامل پنج سطح تنش آبی (E0، E1، E2، E3 و E4 به ترتیب نشان دهنده ی 100، 85، 70، 50 و 30 درصد تامین نیاز آبی) و سه زمان اعمال تنش (T1، T2 و T3 به ترتیب نشان دهنده ی 50 روز رشد اول (استقرار بذر و رشد رویشی)، دوم (رشد کامل) و سوم (رسیدن گیاه) از کل دوره رشد گیاه بود. مقادیر آماره RMSE برای شبیه سازی عملکرد سیب زمینی توسط مدل های AquaCrop و WOFOST به ترتیب برابر با 5/1 و 2/2 تن در هکتار بود. کارایی این دو مدل براساس آماره EF به ترتیب برابر با 95/0 و 98/0 بود. با توجه به آماره های MBE و NRMSE، دقت مدل AquaCrop بهتر از مدل WOFOST بود. بنابراین با توجه به تعداد داده های کمتر، دقت بهتر و واسنجی راحت تر مدل AquaCrop، کاربرد این مدل برای شبیه سازی سیب زمینی پیشنهاد می شود.

    کلید واژگان: بهره وری آب، کم آبیاری، مدل آب محور، مدل کربن محور، شبیه سازی رشد گیاهی
    MohammadAli Ansari, Aslan Egdernezhad *, Niaz Ali Ebrahimipak

    Due to importance of potato plant, simulating its yield under water stress using plant growth simulation models helps researchers to better plan for irrigation. So, this study was conducted to evaluate water driven (AquaCrop) and carbon driven (WOFOST) to simulate potato yield under different water deficit during various cropping stages. To do this end, data collected from a research station in ChaharTakhteh, Shahrekord, during two years (1998-1999) was used. The data was consisted of water stress at five levels (E0, E1, E2, E3, and E4 indicating 100, 85, 70, 50, and 30 percent of crop water needed, respectively) in three time (T1, T2, and T3 indicating 50, 100, and 150 days after sowing, respectively). RMSE values for simulation of yield using AquaCrop and WOFOST were 1.5 and 2.2 ton.ha-1, respectively. Model efficiencies based on EF values were 0.95 and 0.98, respectively. According to MBE and NRMSE values, AquaCrop accuracy was better than WOFOST. In both calibration and validation period, AquaCrop suffered from under estimate error and WOFOST suffered from over-estimate error. Regarding the results, it is recommended to use AquaCrop for simulation potato yield since it needs less data, have better precision and easier calibration.

    Keywords: Carbon Driven Model, Crop Simulation Models, Deficit irrigation, Water Driven Model, Water productivity
  • Mehrdad Zarei, Mohammad Ali Ansari*, Kourosh Zare
    Introduction

    Functional near-infrared spectroscopy (fNIRS) has been broadly applied for optical brain imaging. This method is hemodynamic-based functional brain imaging relying on the measurement of the neurovascular coupling to detect changes in cerebral neuronal activities. The extra-cerebral hemodynamic changes are important contaminating factors in fNIRS measurements. This error signal can be misinterpreted as cerebral activities during fNIRS studies. Recently, it was assumed that temporal changes in deoxygenated hemoglobin concentration [HHb] was hardly affected by superficial blood flow, and it was proposed that the activation maps could be determined from [HHb] at large source-detector separation.

    Methods

    In the current study, we measured the temporal changes in [HHb] using a continues-wave fNIRS device at large source-detector separation, while superficial blood flow was stimulated by infrared lasers. A mesh-based Monte Carlo code was applied to estimate fNIRS sensitivity to superficial hemodynamic changes in a realistic 3D MRI-based brain phantom.

    Results

    First, we simulated photon migration in a four-layered human-head slab model to calculate PPLs and fNIRS sensitivity. Then, the localization of the infrared laser inside a realistic brain model was studied using the Monte Carlo method. Finally, the changes in [HHb] over the prefrontal cortex of six adult males were measured by fNIRS at a source-detector separation of 3 cm. The results demonstrated that the relation between fNIRS sensitivity and an increase in S-D separation was nonlinear and a correlation between shallow and deep signals was observed.

    Conclusion

    The presented results demonstrated that the temporal changes in the superficial blood flow could strongly affect HHb measurement at large source-detector separation. Hence, the cerebral activity map extracted from the [HHb] signal was mainly contaminated by superficial blood flow.

    Keywords: Functional near-infrared spectroscopy, Photobiomodulation, Neurovascular coupling, Superficial blood flow
  • Mohammad Ali Ansari, Mehdi Zakeri
    Introduction

    Recently, infrared lasers (wavelengths larger than 1100 nm) have been applied to stimulate neural tissues. Infrared neural stimulation (INS) has some advantages over conventional electric stimulation, including contact-free delivery, spatial precision, and lack of stimulation artifacts. In this study and based on a photothermal mechanism, we applied the heat diffusion equation to study temperature variation of a biological phantom during INS. In addition, the impact of laser parameters on spatially localized heating induced by two different infrared wavelengths were studied.

    Method

    We studied the localization of INS inside a phantom similar to cortical neural tissue. First, we analytically solved the heat diffusion equation to study the distribution of temperature inside this phantom. Then, the accuracy of analytical results was verified by heating the phantom using amplitude-modulated infrared lasers (lambda= 1450 and 1500 nm, the energy between 2 and 5 mJ and pulse duration up to 20 ms). The laser light was directed to sample by a multimode optical fiber (NA=0.22, Core size= 200 microns). Finally, the impacts of laser properties on the spatial resolution of infrared heating were discerned.

    Result

    In order to verify analytical results, we measured the maximum temperatures of the phantom during illumination of lasers and compared them with analytical results. The analytical results were in agreement with the experimental results. The effects of laser beam properties such as pulse duration, energy and repetition rate frequency on the spatial resolution were investigated. The results indicated that the spatial resolution of INS can be smaller than one millimeter.

    Conclusion

    Here, the influences of laser properties on the localization of INS inside a biological phantom were studied. These results can be applied to improve the spatial selectivity of the peripheral nerve interface.

    Keywords: Infrared neural stimulation, photothermal mechanism, blind localized activation
  • محمد علی انصاری، ذبیحاللهقارلی پور*، سیامک محبی، غلامرضا شریفی راد، احمد راهبر
    زمینه و هدف
    آنفلوانزا، یک بیماری ویروسی حاد دستگاه تنفسی است که با توجه به اهمیت رفتارهای پیشگیری کننده از ابتلا به این بیماری، مطالعه حاضر با هدف تعیین تاثیر آموزش براساس تئوری انگیزش محافظت بر رفتارهای پیشگیری کننده از ابتلا به آنفلوانزای نوع  Aدر دانش آموزان شهر قم صورت گرفت.
    روش بررسی
    این مطالعه مداخله ای بر روی200 دانش آموز پسر پایه دهم در شهر قم انجام شد. نمونه ها به صورت تصادفی در دو گروه مداخله و کنترل (هرکدام 100 نفر) قرار گرفتند. پرسشنامه های مربوطه پیش از مداخله آموزشی و سه ماه بعدازآن توسط گروه آزمون و کنترل تکمیل گردید. مداخله آموزشی شامل: 2 جلسه آموزشی 90 دقیقه ای بود که برای گروه آزمون اجرا شد. داده ها با استفاده از آزمون های تی مستقل، تی زوجی و تحلیل کوواریانس تجزیه وتحلیل شدند.
    یافته ها
    در این مطالعه، بین دو گروه آزمون و کنترل قبل از مداخله آموزشی، تفاوت معنی داری در متغیرهای دموگرافیک، همچنین سازه های تئوری انگیزش محافظت مشاهده نشد (05/0p>). همچنین بعد از مداخله آموزشی، تفاوت معنی داری در میانگین نمرات شدت درک شده، خودکارآمدی، پاداش، انگیزش محافظت و رفتار در گروه آزمون نسبت به گروه کنترل دیده شد (05/0>p)؛ ولی در میانگین نمرات حساسیت درک شده،کارآمدی پاسخ درک شده، هزینه پاسخ و ترس بین دو گروه، تفاوت معنی داری مشاهده نشد (05/0p>).  
    نتیجه گیری
    تئوری انگیزش محافظت می تواند در بروز رفتارهای پیشگیری کننده از ابتلا به آنفلوانزا موثر باشد؛ بنابراین با توجه به تعداد محدود مطالعات در این خصوص، به نظر می رسد انجام تحقیقات بیشتر در این زمینه ضروری است.
    کلید واژگان: انگیزش، دانش آموزان، آنفلوانزا نوع A
    Mohammad Ali Ansari, Zabihollah Gharlipour*, Siamak Mohebi, Gholam Reza Sharifirad, Ahmad Rahbar
    Background and Objectives
    Influenza is an acute viral respiratory disease. Given the importance of influenza preventive behaviors, the present study aimed at determining the effect of education based on preventive behaviors of Influenza A among the students in Qom city.
     
    Methods
    This interventional study was conducted on 200 tenth-grade male students in Qom city. The samples were assigned to two groups of intervention and control (each 100 subjects). The related questionnaires were completed by both intervention and control groups before and three months after the intervention. Training intervention consisted of two 90-minute sessions, which was performed for the intervention group. Data were analyzed using independent t-test, paired t-test, and covariance analysis.
     
    Results
    In this study, no significant difference was observed between intervention and control groups before the training intervention in terms of demographic variables as well as the components of the protection motivation theory (p>0.05). After the training intervention, a significant difference was observed in the mean scores of perceived severity, self-efficacy, reward, protection motivation, and behavior in the intervention group, as compared to the control group (p<0.05). However, there was no significant difference between the two groups in terms of the mean scores of perceived sensitivity, perceived efficacy of response, response cost, and fear (p>0.05).
     
    Conclusion
    The protection motivation theory can be effective in inducing influenza preventive behaviors. Thus, given the limited studies in this field, it seems necessary to conduct further studies in this area.
    Keywords: Motivation_Students_Influenza A Virus
  • محمدعلی انصاری، نیازعلی ابراهیمی پاک، اصلان اگدرنژاد *
    به منظور ارزیابی دو مدل AquaCrop و Cropsyst در شبیه سازی عملکرد و کارآیی مصرف آب سیب زمینی، تحقیق حاضر در یک مزرعه تحقیقاتی در چهارتخته شهرکرد در دو سال زراعی با استفاده از دو تیمار مقدار تنش آبی در پنج سطح (E0، E1، E2، E3 و E4 به ترتیب نشان دهنده ی 100، 85، 70، 50 و 30 درصد تامین نیاز آبی که بر اساس نتایج لایسیمتر تعیین شده بود) و زمان اعمال تنش در سه دوره زمانی از کشت سیب زمینی شامل T1، T2 و T3 به ترتیب نشان دهنده ی 50 روز رشد اول (کشت بذر و رشد رویشی)، دوم (رشد کامل) و سوم (رسیدن گیاه) از کل دوره رشد و مجموعا 30 داده انجام شد. از داده های سال اول به منظور واسنجی و داده های سال دوم برای صحت سنجی این دو مدل استفاده شد. نتایج شبیه سازی توسط AquaCrop نشان داد که بیشترین و کمترین خطای عملکرد به ترتیب برابر با 15/3 (E1T2) و 3/0 (E1T3) تن در هکتار و بیشترین و کمترین خطای کارآیی مصرف آب به ترتیب برابر با 53/0 (E3T2) و 03/0 (E4T2) کیلوگرم بر مترمکعب بود. بیشترین و کمترین خطای برآورد عملکرد توسط مدل Cropsyst به ترتیب برابر با 34/2 (E3T3) و 35/0 (E1T2) تن بر هکتار بودند. این مقادیر برای کارآیی مصرف آب به ترتیب برابر با 32/0 (E3T2) و 03/0 (E1T1) کیلوگرم بر مترمکعب به دست آمد. مقادیر آماره NRMSE عملکرد برای مدل های AquaCrop و Cropsyst در مرحله واسنجی به ترتیب 9/0 و 7/0 و در مرحله صحت سنجی به ترتیب برابر با 5/0 و 9/0 بود. مقادیر آماره EF عملکرد برای مدل AquaCrop در مراحل واسنجی و صحت سنجی به ترتیب برابر با 99/0 و 95/0 و برای مدل Cropsyst در این دو مرحله به ترتیب برابر با 90/0 و 79/0 بود. بنابراین، گرچه هر دو مدل دقت مطلوبی داشتند ولی AquaCrop کارآیی بهتری داشت. بر اساس این نتایج، استفاده از مدل AquaCrop در تنش های آبی خفیف (به دلیل شبیه سازی بهتر واکنش گیاه به آب جذب شده) و کاربرد Cropsyst در تنش های شدیدتر (به دلیل استفاده این مدل از معادله مبتنی برتابش) توصیه می شود. همچنین، کاربرد مدل Cropsyst در مرحله میانی رشد سیب زمینی بهتر از مدل AquaCrop است.
    کلید واژگان: تنش آبی، مدل آب محور، مدل تابش محور، مدل سازی گیاهی
    Mohammad Ali Ansari, Aslan Egdernezhad, Niaz Ali Ebrahimipak
    To evaluate AquaCrop and Cropsyst models  for simulating yield and water use efficiency (WUE), this research was performed at the Research Station in ChaharTakhteh, Shahrekord, during 1998-1999, by considering water stress amount at five levels (E0, E1, E2, E3, and E4 indicating 100, 85,70, 50, and 30 percent of crop water needed according to lysimeter data, respectively) in three periods during potato production (T1, T2, and T3 indicating 50, 100, and 150 days after sowing, respectively) and 15 data in each year. First year data was used to calibrate and the second year was used to validate AquaCrop. The highest and lowest differences between observed and AquaCrop simulated yield were 3.15 (E1T2) and 0.3 (E1T3) ton.ha-1</sup>, respectively, and the highest and lowest WUE were 0.53 (E3T2) and 0.03 (E4T2) kg.m-3</sup>, respectively. The highest and lowest differences between observed and Cropsyst were 2.34 (E3T3) and 0.35 (E1T2), ton.ha-1</sup>, respectively. Corresponding results for WUE were 0.32 (E3T2) and (E1T1) kg.m-3</sup>, respectively. NRMSE results for Yield were 0.9 (AquaCrop) and 0.7 (CropSyst) for calibration periods and 0.5 (AquaCrop) and 0.9 (CropSyst) for validation periods. EF values for yield were 0.99 and 0.95 for AquaCrop and 0.90 and 0.79 for CropSyst in calibration and validation periods, respectively. Both models had good precision; however, AquaCrop had better efficiency for simulating yield. Based on results, it is recommended to use AquaCrop in low water stress (since it is water-driven model and simulates water response to water accurately) and apply Cropsyst in high water stress (since it is radiation-driven model). In addition, using Cropsyst in T2 is better than AquaCrop.
    Keywords: Crop Modeling, Radiation-driven Model, Water Stress, Water-driven Model
  • Alireza Sepehri Shamloo, Aliasghar Moeinipour, Hamid Hoseinikhah, Ladan Alizadeh, Mohammad Ali Ansari, Reza Tarjoman Porshokoh*
    Background
    A better sternal fixation reduces the attendant risk of superficial and deep infection and enhances postoperative respiratory mechanics, thereby fast-tracking the patient’s recovery and rehabilitation, as well as professional re-ion. The aim of this study was to evaluate the safety and efficacy of Wire-Box Fixation as an alternative technique for sternal closure after median sternotomy.
    Methods
    This case-series study was conducted on patients undergoing routine sternal closure after median sternotomy, which was concluded with Wire-Box Fixation. The current method can be executed with a sternal wire number 5 or 7. First, a figure-of-eight (FOE) stitch is placed on the manubrium. Then, a stitch is placed above the inferior loop of the previous one in its hole. It is thereafter exited out above the former wire and turned around downstream (interlocking) to profile the second FOE stitch so as to dress the Louis angle between the manubrium and the sternal body. This procedure is repeated until a total number of 4 to 5 interlocking FOE stitches are placed in proportion to the sternal length. When placing an FOE stitch, care should be taken to stitch perpendicularly and staying trans-sternal to decrease the risk of iatrogenic bleeding.
    Results
    In total, 191 patients at a mean age of 56.0±14.4 years were enrolled. The mean pain score level on the first postoperative day, based on a visual analog pain scale, was reported to be 4.8±2.1, while it was reported to be 2.1±1.4 on the day of discharge. No sternum instability, dehiscence, or revision surgery was reported with the usage of Wire-Box Fixation. An incidence rate of 0.51% was reported for wound infection and 4.1% for death unrelated to wiring. No further complications were reported during a 3-month follow-up.
    Conclusions
    It appears that Wire-Box Fixation is an optimal technique of sternal fixation given its prominent advantages of low cost, rapid installation, and low incidence of complications.
    Keywords: Wiring, Wire-Box Fixation, Sternotomy, Cardiac surgery
  • محمد علی انصاری، اصلان اگدرنژاد*، نیازعلی ابراهیمی پاک
    به منظور برنامه ریزی آبیاری سیب زمینی براساس تخلیه رطوبتی، از مدل واسنجی شده ی AquaCrop استفاده شد. این مدل با استفاده از داده های برداشت شده از دو فصل زراعی یک مزرعه تحقیقاتی در چهارتخته شهرکرد واسنجی شد. سپس مدل AquaCrop تحت اجراهای متوالی قرار گرفت به طوری که سناریوهای مختلف تخلیه رطوبت از ناحیه ریشه و آبیاری مجدد آن (DyIx؛ که y میزان تخلیه و x میزان آبیاری بر حسب میلی متر است) بررسی شد. نتایج نشان داد که تخلیه رطوبت تا 40 میلی متر و آبیاری مجدد آن هیچ گونه تنشی به گیاه وارد نکرد. تخلیه رطوبت بیشتر از 80 میلی متر سبب افت شدید رطوبت گردید به طوری که عملکرد و زیست توده به مقداری نزدیک به صفر کاهش یافت. به منظور کم آبیاری، تخلیه رطوبت بین 40 تا 70 میلی متر مناسب بود. نتایج اعمال کم آبیاری در سناریوهای مختلف نشان داد که بیشترین عملکرد در سناریوی D40I40 (6/22 تن بر هکتار) و کمترین عملکرد در سناریوی D70I20 (8/10 تن بر هکتار) به دست آمد. در حالت کمبود آب، سناریوهای D60I40، D60I30 و D65I30 به عنوان بهترین سناریوها مشخص شدند به طوری که مقدار عملکرد در این سناریوها به ترتیب 8/16، 2/22 و 27 درصد کمتر از D40I40 بود. مقدار زیست توده این تیمارها نیز به ترتیب 6/16، 8/21 و 7/26 درصد کمتر از D40I40 بود. این سناریوها کارایی مصرف را به ترتیب 7/0 درصد (افزایش)، 7/0 درصد (کاهش) و 9/1 درصد (کاهش) تغییر دادند. بنابراین D40I40 بهترین سناریو در شرایط آبیاری کامل و D60I40 مناسب ترین سناریو در شرایط کم آبیاری بود.
    کلید واژگان: زیست توده، سناریوهای کم آبیاری، کارائی مصرف آب، مدل های گیاهی
    Mohammad Ali Ansari, Aslan Egdernezhad *, Niazali Ebrahimipak
    In order to potato irrigation planning based on moisture depletion, calibrated AquaCrop was used. This model was calibrated using data collected from a research station in Chahartakhteh, Shahrekord, in two years. Then, Aquacrop was implemented under multi run in different depletion and irrigation scenarios (DyIx; which y indicates depletion amount and x indicates irrigation amount in mm). Results revealed that there was no water stress under 40 mm depletion and 40 mm irrigation. Crop yield and biomass was so low when depletion was more than 80 mm. In order to apply deficit irrigation, depletion must be between 40 to 70 mm. Based on the results, maximum yield was observed for D40I40 (22.6 ton.ha-1) and minimum yield was observed for D70I20 (10.8 ton.ha-1). In the case of water deficit, D60I40, D60I30, and D65I30 were the best scenarios so that the yields for mentioned scenarios were 16.8, 22.2, and 27 percent less than D40I40 yield. Biomass values for mentioned scenarios were 16.6, 21.8, and 26.7 percent less than D40I40 biomass. Water use efficiency for this scenarios were 0.7 (more), 0.7 (less), and 1.9 (less) than D40I40 one. So, D40I40 and D60I40 were the best scenario in full and deficit irrigation, respectively.
    Keywords: Biomass, Deficit Irrigation Scenarios, Water Use Efficiency, Cropping Models
  • Mostafa Sajadian, Ladan Alizadeh, Mahmoud Ganjifard, Armin Mardani, Mohammad Ali Ansari, Homa Falsoleiman *
    Percutaneous coronary angioplasty (PCI) and stent implantation are the most common therapeutic strategies for coronary artery stenosis; however, in-stent restenosis (ISR) is one of its important challenges. Although in some studies, coronary artery disease (CAD) factors are deemed to be the causes of ISR, in some others, the relationship between CAD factors and ISR are not observed. Over the past ten years, there has been no review article on factors affecting the ISR. This article aimed to review the possible factors affecting ISR in patients undergoing PCI. This narrative review study was conducted on PubMed, Web of Science, Scopus, and Google Scholar databases between 1 January 1990 and 30 July 2017. After initial screening of 1728 retrieved articles, 1401 articles were excluded to due irrelevancy to the review; and finally, 39 papers were selected for data collection. Our study results showed that the site and length of implanted stent, hypertension and diabetes are the most probable factors affecting ISR. Further studies are required for evaluation of the effect of other possible risk factors such as genetic sequencing, obesity, chronic infections and hemoglobin A1C levels. [GMJ.2018;7:e961]
    Keywords: Angioplasty, Stents, Coronary Stenosis, In-Stent Restenosis
  • احمد الهیاری بوزنجانی*، فریبرز رحیم نیا، سعید مرتضوی، محمدعلی انصاری
    هدف از انجام پژوهش حاضر، شناخت ویژگی ها و مولفه های جهادی بودن و عوامل موثر بر آن با جهت گیری نگرش ها و رفتارهای شغلی منابع انسانی بود. برای این منظور، با استفاده از «روش تحقیق موضوعی قرآن کریم» به بررسی مجموعه ای از آیات قرآنی مرتبط پرداخته شد و مفهوم جهادی بودن و عوامل موثر بر آن، از بطن آن ها استخراج گردید. یافته ها نشان داد، جهادی بودن مفهومی است که ویژگی های آن در قالب مولفه هایی دوازده گانه و ابعادی چهارگانه با عناوین آرمان خواهی، ایثارگری، فرح بخشی و خردورزی انعکاس یافته است. افزون بر این، مشخص شد که ریشه های شکل گیری و تقویت این مفهوم در توکل، یقین مندی و ارزش محوری افراد نهفته است که در این میان، توکل و یقین مندی افراد ضمن تاثیر پذیرفتن از ارزش محوری آن ها، در تعامل با یکدیگر موجب تقویت جهادی بودن آن ها می شوند. به عنوان یک نتیجه کلی، منابع انسانی جهادی عبارت هستند از از کارکنانی باانگیزه که در محیط کاری خود، منشاء اثر بوده و آرمان خواهانه و با تکیه بر تعقل و خردورزی، در راه تحقق اهدافی ارزشی، ایثارگرانه تلاش می کنند.
    کلید واژگان: جهادی بودن، ایثارگری، آرمان خواهی، فرح بخشی، خردورزی
    Ahmad Allahyari Bouzanjani *, Fariborz Rahimnia, Saeed Mortazavi, Mohammad Ali Ansari
    This research aims to identify the attributes and components of being Jihadi and its formative factors with an orientation to the job attitudes and behaviors. To do so, using the “thematic research method of Quran” a sample of Quranic verses were investigated and the concept of being Jihadi and its formative factors were extracted. According to findings, being Jihadi is a concept that its attributes have been reflected into twelve components and four dimension of idealism, Bracing, self-sacrificing and Rationality. Moreover, it was found that formation and reinforcement of this concept roots in the individuals’ value orientation, trust to God and certainty. In this context, trust to God and certainty while affected by individuals’ value orientation, together forms HRs Jihadi attributes. As a general conclusion, it was found that Jihadi human resources are motivated staff that are initiative in their workplace and sacrificically try to achive valuable goals in an idealistic and rational manner.
    Keywords: Being Jihadi, idealism, Bracing, self-sacrificing, Rationality
  • محمد علی انصاری، سید محمد مهدی دهقان*
    این مقاله به افزایش دقت محاسبه میزان پوشش مکانی - زمانی به عنوان معیاری برای ارزیابی توانایی یک سیستم نظارت هوایی در ماموریت پوشش مناطق مرزی در طول زمان می پردازد. محاسبه پوشش مکانی - زمانی و به عبارت دیگر تعیین احتمال رویت اهداف متحرک مستلزم در نظر گرفتن سرعت موثر عامل مهاجم؛ یعنی اندازه سرعت لحظه ای در راستای عمود بر مرز می باشد. در مقالات قبلی، این معیار براساس حداکثر مقدار متوسط سرعت عامل مهاجم محاسبه شده و توانایی ارزیابی اثر تغییرات رفتار عامل مهاجم را نداشت. این مقاله برای ارزیابی دقیق تر پوشش مکانی - زمانی، تغییر رفتار عامل مهاجم به دلیل اطلاع از وجود سیستم هوایی حفاظت از مرز را به کمک تابع چگالی احتمال انتخاب سرعت های مختلف و زمان های خاص تردد مدل نموده است. نتایج شبیه سازی نشان می دهد که محاسبه پوشش مکانی - زمانی با این روش نشان دهنده موفقیت بیشتر سیستم نظارت هوایی نسبت به استفاده از روش معمول محاسبه پوشش می باشد.
    کلید واژگان: پهپاد، حفاظت از مناطق مرزی، نظارت هوایی، پوشش مکانی - زمانی، عامل مهاجم، تابع توزیع احتمال
    Mohammad Ali Ansari, Seyyed Mohammad Mehdi Dehghan*
    This paper investigates the correctness of the spatiotemporal coverage as a suitable criterion for performance evaluation of a border patrolling algorithm. This criterion, which determines the probability of the intruder observation, shows the coverage of different points of the border during a period of time. Spatiotemporal coverage depends on the effective velocity of the intruder which means the magnitude of the instantaneous velocity perpendicular to the border. In the previous research, the maximum of the average velocity of the intruder is used to calculate the spatiotemporal coverage. Computing this criterion in this manner can’t show the effect of the behavior change of the intruder on the spatiotemporal coverage and wont provide a correct evaluation of the border patrolling capability of the system. This paper tries to represent a better assessment of the coverage using probability density function for the intruder's uncertain behaviors in selecting different passage times and speeds. Simulation result shows that the calculation of the spatiotemporal coverage with this approach provides a better evaluation of aerial surveillance capability in comparison to the traditional methods of coverage evaluation.
    Keywords: UAV, border patrolling system, arial surveillance, spatiotemporal coverage, intruder, probability density function
  • لاله پوریامنش *، شهناز شهرجردی، محمد کریمی زاده اردکانی، محمدعلی انصاری
    زمینه و هدف
    وجود ناهنجاری های وضعیتی، تاثیر نامطلوبی بر درک و تصور بدنی به خصوص در افراد جوان دارد. ناهنجاری ها اگر به موقع شناسایی و درمان نشوند ممکن است آثار نامطلوبی بر عملکرد فیزیولوژیک بدن داشته باشند. هدف این پژوهش، بررسی ناهنجاری های عضلانی اسکلتی ستون فقرات دانشجویان دختر پردیس دانشگاه فرهنگیان اراک و ارتباط آن با سلامت روان و کیفیت زندگی می باشد.
    روش بررسی
    پژوهش حاضر از نوع توصیفی مقطعی و همبستگی محسوب می شود. در این مطالعه، نمونه ای 120 نفری از دانشجویان به روش تصادفی خوشه ای، انتخاب گردید. به منظور گردآوری داده های مربوط به ناهنجاری های عضلانی اسکلتی، از صفحه شطرنجی و آزمون سازمانی نیویورک و خط مرجع شاقولی و خط کش منعطف و جهت جمع آوری اطلاعات مربوط به کیفیت زندگی و سلامت روان از دو پرسشنامه ی معتبر GHQ و پرسشنامه سلامت روان گلد برگ استفاده شد.
    یافته ها
    نتایج حاصل از تحلیل داده ها نشان داد که حدود 91% دانشجو معلمان دارای انواع مختلفی از ناهنجاری های عضلانی اسکلتی بودند و تنها بین کیفیت زندگی دانشجویان با ناهنجاری های عضلانی اسکلتی رابطه معکوس و معنی داری وجود دارد.
    نتیجه گیری
    ناهنجاری های عضلانی اسکلتی، نه تنها در سلامت جسمی و کارکرد اندام ها موثر است، بلکه بر فاکتورهای روان شناسی نیز تاثیرگذار خواهد بود. بنابراین می توان نتیجه گرفت که شناسایی به موقع آن ها تاثیر به سزایی در سلامت جسمی و روحی افراد جامعه خواهد داشت.
    کلید واژگان: ناهنجاری های قامتی، کیفیت زندگی، سلامت روانی
    Lala Pooryamanesh *, Shahnaz Shahrjerdi, Mohammad Karimizadeh Ardakani, Mohammadali Ansari
    Background And Aims
    Postural abnormalities could adversely effect on the body perception, particularly in young people. If they don’t detect and treat, may have effect on physiological function. The aim of this study was to determine the musculoskeletal disorders deformities among teacher students of Arak city and relation with mental health and quality of life.
    Methods
    This study is cross-sectional and correlational research. In this study, a sample of 120 students of randomly had been chosen. In order to collect data on musculoskeletal disorders, the grid and New York test and mirror box and flexible ruler and to collect information on the quality of life and mental health of valid questionnaires GHQ and the General Health Questionnaire Goldber were used.
    Results
    The results of the analysis showed that about 91% students had musculoskeletal disorders and variety of postural abnormalities and mental health and quality of life of students, there is a significant negative relationship.
    Conclusion
    Musculoskeletal disorders not only effect on physical health and organs function, but they are effective on Psychological factors. So, it can be concluded that on time identification of a significant will have a great impact on community member’s physical and mental health.
    Keywords: Postural disorders, Quality of life, Mental health
  • محمد علی انصاری *، علی فلاحتی، سهراب دل انگیزان
    چالش عدم تعادل بین منابع و مصارف در صندوق های بازنشستگی و پیامدهای منفی آن، به ویژه افزایش کسری صندوق ها و به تبع آن افزایش تعهدات دولت در این حوزه، اجرای اصلاحات را در این صندوق ها اجتناب ناپذیر نموده است. اما سوال اساسی این است که چرا باوجود درک بحران برای کنش گران مختلف میدان بازنشستگی، این اصلاحات عملیاتی نشده است. علت اصلی این موضوع را باید در ماهیت پیچیده و چندبعدی بازنشستگی جستجو نمود. در چنین مسائل پیچیده ای، تحلیل بازی شکل گرفته بین کنش گران مختلف باهدف فهم پیچیدگی و تبیین مساله بسیار مهم و اساسی است. بر این اساس، این پژوهش با استفاده از یکی از مدل های نظریه بازی ها موسوم به مدل گراف برای حل مناقشه به عنوان ابزاری مناسب برای مدل سازی و تحلیل مسائل پیچیده، بازی شکل گرفته بین ذی نفعان مختلف بازنشستگی در ایران را مدل سازی و تحلیل نموده و بر اساس آن محتمل ترین نتایج بحران فعلی را تبیین خواهد نمود و در انتها نیز رهنمودهایی برای حل این بحران ارایه خواهد نمود. نتایج مدل سازی نشان داد با بازیگران فعلی و ترجیحات کنونی آنها، محتمل ترین و پایدارترین نتیجه ممکن بحران بازنشستگی، ادامه وضعیت موجود است و بر همین اساس، هر نوع اصلاح ساختاری یا پارامتری که در این زمین بازی پیشنهاد شود احتمال عملیاتی شدن آن بسیار پایین است. همچنین نتایج به دست آمده با استفاده از تحلیل های بازی معکوس بیانگر این است که جلوگیری از تداوم وضع موجود و رهایی از بن بست کنونی، مستلزم اتخاذ سیاست هایی با هدف تغییر ترجیحات کنش گران میدان بازنشستگی و همراه نمودن آنها برای انجام اصلاحات است که دستابی به چنین هدفی، نیازمند دخالت تصمیم گیرندگان ارشد حاکمیتی و تدوین سیاست ها و ایجاد ساختارهای اجرایی جدید است. برای این منظور، حاکمیت ( هر سه قوه) باید بخشی از اقتدار خود را به نهاد فراقوه ای، مستقل و آینده نگر با مسئولیت تدبیر امور بین نسلی در حوزه بازنشستگی موسوم به رگولاتور یا نهاد تنظیم کننده مقررات بازنشستگی و نظارت بر حسن اجرای قوانین و مقررات ببخشد تا این نهاد، بدون توجه به مسائل سیاسی و جناحی، سیاست گذاری های لازم برای خروج از بحران فعلی را انجام دهد.
    کلید واژگان: نظام بازنشستگی، نظریه بازی ها، مدل گراف برای تحلیل مناقشه، تحلیل پایداری، مناقشه استراتژیک، بازی معکوس
  • الهه شیعه زاده، سعید مرتضوی، محمدعلی انصاری
    هدف این پژوهش، مشخص کردن شاخصهای رفتاری توکل و تعیین میزان تناسب آن با سبک غالب تصمیم‎گیری مدیران است؛ بدین منظور شاخصهای رفتاری توکل از طریق مصاحبه با ده تن از صاحبنظران مدیریت اسلامی به روش گلوله برفی استخراج، و به ‏منظور کسب اطمینان از یافته های مصاحبه و ماهیت نگرشی رفتاری شاخصها، روش دلفی نیز به کار گرفته، و نهایتا سیزده شاخص رفتاری توکل شناسایی شد. در ادامه، سطح توکل مدیران و سبک تصمیم‎گیری 115 تن از مدیران سازمان های فرهنگی مستقر در شهرستان مشهد با استفاده از ابزار پرسشنامه از طریق روش نمونه‎گیری در دسترس مورد سنجش واقع شد. یافته های پژوهش کمی ‎بیان می کند که سطح توکل مدیران سازمان های فرهنگی مورد مطالعه متوسط به بالا است؛ هم چنین بین میزان توکل مدیران و سبک عقلایی (به عنوان سبک غالب تصمیم‎گیری آنها) ارتباط مستقیم و معناداری وجود دارد.
    کلید واژگان: تصمیم‎گیری و توکل، سبک تصمیم‎گیری، سازمان های فرهنگی، شاخصهای رفتاری توکل
    Elaheh Shiehzadeh, Saeed Mortazavi, Mohammad Ali Ansari
    This research is aimed at identifying the behavioral indicators of trust in God and their relevance to the most dominant method of decision making of managers. The indicators of trust in God were identifies by interviewing ten scholars of the Islamic management through snowball style. Delphi method was also applied in order to confirm the findings of the interviews and the attitudinal and behavioral nature. 13 behavioral indicators were identified for trust in God. Then, the amount of trust in God by cultural organizations managers of Mashhad were measured by interviews and questionnaires. The results indicated that the quantitative level of trust in God was high. Trust in God and the ritual decision making, the most dominant methods, are directly and significantly related.
    Keywords: decision making, trust in God, methods of decision making, cultural organizations, behavioral indicators of trust in God
  • محمد علی انصاری، عمادالدین صادق زاده نایینی، محمد کاظم بشارتی گیوی، قادر فرجی
    فرآیند اکستروژن اصطکاکی اغتشاشی، فرآیندی نوین جهت بازیافت مواد فلزی است که توانایی تولید مواد نانومهندسی با خواص مکانیکی و فیزیکی مطلوب را دارا می باشد. نوآوری این روش، استفاده از حرارت اصطکاکی و تغییر شکل پلاستیک شدید برای سیلان مواد، آلیاژسازی مکانیکی و در نهایت تبدیل پودر و براده به قطعات قابل استفاده است. ریزساختار نمونه ها بر مبنای آزمون متالوگرافی تعیین و اندازه متوسط دانه برای 18 نمونه به دست آمده است. پارامتر های آزمایش با استفاده از اصول طراحی آزمایش دو عاملی و تحلیل واریانس مورد بررسی قرار گرفته و برمبنای نتایج تجربی بدست آمده صحت سنجی شده است. در این پژوهش تاثیر سرعت دورانی در سه سطح و سرعت پیشروی در دو سطح بر ریز ساختار سیم تولید شده به روش اکستروژن اصطکاکی اغتشاشی مورد بررسی قرار گرفته است. با بهره گیری از روش طراحی آزمایش به شیوه ی عاملی کامل، رابطه ای جهت پیش بینی اندازه دانه برحسب پارامترهای ذکر شده ارائه شده است. هم چنین با استفاده از تئوری مانده ها، نمودار احتمال نرمال و روند تغییر مانده ها، اثر ورود خطای سیستماتیک و قابلیت اطمینان به داده های حاصل از آزمایش بررسی شده است. ناحیه بهینه مشخص شده در نمودار کانتوری نشان می دهد که سرعت دورانی rpm 250 و سرعت پیشروی mm/min 14، شرایط مناسب برای ایجاد اندازه متوسط دانه کمینه و استحکام بیشینه را فراهم می کند. لازم به ذکر است که تحلیل واریانس نشان می دهد که پارامترهای سرعت دورانی، سرعت پیشروی و اثر تقابلی سرعت دورانی و سرعت پیشروی به ترتیب تاثیر معناداری بر خروجی اندازه متوسط دانه سیم تولیدی می گذارد.
    کلید واژگان: منیزیم، فرایند اکستروژن اصطکاکی اغتشاشی، طراحی آزمایش، تحلیل واریانس
    Mohammad Ali Ansari, Emadoddin Sadeqzadeh Naeini, Mohammad Kazem Besharati Givi, Ghader Faragi
    Friction Stir Extrusion (FSE) is a modern one step process with high efficiency for conversion and recycling of materials which capable of producing Nano-engineered material via production with good deformability, mechanical and physical properties. Novelty of this production technique is utilization of frictional heat and severe plastic deformation for material flowing, mechanical alloying and finally amendment of powder, chips and other recyclable scraps directly to useful products. Sample’s microstructure was revealed and average grain size was gained for 18 samples. Experimental parameters by use of design of experiments for two factors and analysis of variance were investigated and by the use of experimental results were validated. In this study, the effect of rotational speed in 3 levels and plunge rate in 2 levels were examined on microstructure of produced wires via FSE process. Based on process parameters, there is an equation for grain size prediction was presented by using full factorial design of experiment. Furthermore, normal possibility diagram and residual versus order based on residual theorem were evaluated for systematic error entry and reliability to experimental results. The efficient region on contour diagram reveals that suitable condition of minimum grain size and maximum strength occurred at 250 rpm for rotational speed and 14 mm/min for feed rate. It should be noted that analysis of variance showed that rotational speed, feed rate and interaction of rotational speed and feed rate respectively have a meaningful effect on the grain size of produced wire.
    Keywords: Magnesium, Friction Stir Extrusion, Design of Experiments, Analysis of Variance
  • Mohammad Ali Ansari, Mohsen Erfanzadeh, Zeinab Hosseini, Ezzedin Mohajerani
    Introduction
    In this study, we intend to use diffuse optical Tomography (DOT) as a noninvasive, safe and low cost technique that can be considered as a functional imaging method and mention the importance of image reconstruction in accuracy and procession of image. One of the most important and fastest methods in image reconstruction is the boundary element method (BEM). This method is introduced and employed in our works.
    Method
    Generally, to image a biological tissue we must obtain its optical properties. In order to reach this goal we benefit from diffusion equation because tissue is highly scattering medium. Diffusion equation is solved by boundary element equation (BEM) in our research. First, we assume a double layer phantom with different scattering and absorption coefficients to simulate and verify precession and accuracy of image reconstruction by BEM. Light absorption can be affected by volume fraction of blood in skin. For a specific skin species the volume fraction is calculated and then the results are compared with the reconstructed values obtained by BEM. Since the depth of tissue is important in light absorption a two layer phantom with known values is made and the depths of layers are reconstructed by BEM then they are compared with the expected values. A homogenous phantom with known scattering and absorption coefficients was made and then these coefficients were reconstructed by BEM. Finally, an inhomogeneous phantom (phantom with defect) whose defect was in a known position was made and the absorption and scattering coefficients were reconstructed and compared with real values.
    Results
    Comparison between real or simulated values and reconstructed values of scattering and absorption coefficients, volume fraction of blood and thickness of phantom layers by BEM shows maximum errors of 24%, 7% and 35%, respectively.
    Conclusion
    Comparison between BEM data and real or simulated values shows an acceptable agreement. Consequently, we can rely on BEM as a beneficial method in diffuse optical tomography image reconstruction.
    Keywords: optical tomography, phantom, laser
  • Mohammad Ali Ansari, Mohsen Erfanzadeh, Ezeddin Mohajerani
    Laser-tissue interaction is of great interest due to its significant application in biomedical optics in both diagnostic and treatment purposes. Major aspects of the laser-tissue interaction which has to be considered in biomedical studies are the thermal properties of the tissue and the thermal changes caused by the interaction of light and tissue. In this review paper the effects of light on the tissue at different temperatures are discussed. Then, due to the noticeable importance of studying the heat transfer quantitatively, the equations governing this phenomenon are presented. Finally a method of medical diagnosis called thermography and some of its applications are explained.
    Keywords: Lasers, Tissues, Absorptions
نمایش عناوین بیشتر...
سامانه نویسندگان
  • دکتر محمد علی انصاری
    دکتر محمد علی انصاری
    معاون آموزشی پژوهشکده لیزر و پلاسما- دانشگاه شهیدبهشتی
  • دکتر محمد علی انصاری
    دکتر محمد علی انصاری
    دانشجوی دکتری آبیاری و زهکشی.آبیاری و زهکشی. دانشکده کشاورزی و منابع طبیعی، واحد اهواز، دانشگاه آزاد اسلامی، اهواز، ایران
  • محمد علی انصاری
    محمد علی انصاری
    دانشجوی کارشناسی ارشد الهیات و معارف اسلامی علوم قرآن و حدیث، دانشگاه شهید باهنر کرمان، کرمان، ایران
اطلاعات نویسنده(گان) توسط ایشان ثبت و تکمیل شده‌است. برای مشاهده مشخصات و فهرست همه مطالب، صفحه رزومه ایشان را ببینید.
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال