r. moradi
-
جهت بررسی پتانسیل پرایمینگ بذرگیاه همیشه بهار با عصاره برخی مواد آلی بر افزایش مقاومت این گیاه به اثر سمیت کادمیوم مطالعه ای گلدانی به صورت فاکتوریل در قالب طرح کاملا تصادفی با سه تکرار درگلخانه تحقیقاتی مرکز آموزش عالی کشاورزی بردسیر، دانشگاه باهنر کرمان در سال 1401 طراحی شد. فاکتور اول، تنش کادمیوم در چهار سطح (0، 30، 40 و 60 میلی گرم کادمیوم بر کیلوگرم خاک) و فاکتور دوم پیش تیمار بذر گیاه همیشه بهار با عصاره برخی مواد آلی شامل: تفاله موم زنبورعسل، ورمی کمپوست، میوه سپستان و عدم پرایمینگ بود. نتایج نشان داد که با افزایش سطوح تنش کادمیوم، صفات تعداد برگ، تعداد گل، وزن خشک گل، وزن خشک بوته، کلروفیل، پروتئین، قند محلول و فعالیت آنزیم کاتالاز در گیاه همیشه بهار به گونه معنی-داری کاهش یافت. بااین حال، تنش کادمیوم فعالیت آنزیم گایاکل پراکسیداز، آنتوسیانین، فنل و پرولین را افزایش داد. در این بین اثر عصاره ورمی کمپوست و تفاله موم زنبورعسل نسبت به عصاره سپستان مشهودتر بود. همچنین با افزایش شدت تنش کادمیوم نقش مثبت پرایمینگ بذر بر کاهش اثرات منفی تنش بیشتر بود. به طوری که، در سطح تنش 60 میلی گرم کادمیوم بر کیلوگرم خاک، پرایمینگ بذر با ورمی کمپوست و موم زنبورعسل به ترتیب باعث افزایش حدود % 66 و %54 میانگین وزن خشک بوته نسبت به شاهد شد، درحالی که در شرایط تنش 40 میلی گرم کادمیوم بر کیلوگرم خاک این افزایش به ترتیب 12% و %7 درصد بود. پرایمینگ بذر با مواد آلی به ویژه ورمی کمپوست و تفاله موم زنبور عسل، در شرایط تنش و عدم تنش، فعالیت کاتالاز، محتوای قند، فنل و پروتئین را به طور معنی داری افزایش داد. بنابراین به نظر می رسد استفاده از مواد آلی مورد مطالعه مخصوصا تفاله موم زنبور عسل و ورمی کمپوست از طریق افزایش فعالیت آنتی اکسیدانی و تنظیم اسمزی، توانست گیاه را در شرایط تنش کادمیوم محافظت کرده و به طور قابل توجهی میزان تنش را تعدیل کند.
کلید واژگان: آنزیم، آنتوسیانین، پرولین، فنلIntroductionCadmium, a heavy and hazardous metal with an atomic number of 48, is increasingly disseminated in agricultural soils and negatively affects plants due to its high solubility in water. The toxic distribution of this element in soils and plants leads to reduced germination, impaired plant growth, and diminished activities of antioxidant enzymes. Marigold, belonging to the Asteraceae family, possesses the ability to absorb cadmium from contaminated soils and is recognized as an ornamental and medicinal plant. Furthermore, employing seed priming techniques can enhance the plant's resistance to environmental stresses, including cadmium exposure. This study investigates the effects of marigold seed pre-treatment on growth, physiological traits, and antioxidant activity under cadmium stress conditions.
Materials and MethodsTo investigate the effects of marigold seed pre-treatment on growth and biochemical characteristics under cadmium stress conditions, a factorial experiment was conducted in a completely randomized design with three replicates at the Agricultural Higher Education Center in Bardseer, southest of Iran. The study included two factors: varying cadmium levels (0, 30, 40, and 60 mg/kg of soil) and four types of seed priming (beeswax pomace, vermicompost, cordia fruit extract, and no priming). To prepare organic extracts, dried and ground materials were mixed with distilled water and filtered after 48 h on a shaker. Seeds were soaked in these extracts for 12 hours before being sterilized and sown. The dry weight of aerial organs was measured, and biochemical characteristics such as phenolic content, anthocyanins, proline, protein, chlorophyll, carotenoids, and antioxidant enzyme activities were assessed. Analysis of variance was performed using SAS software, and mean comparisons were conducted using the LSD test.
ResultsThe results indicated that increasing levels of cadmium stress significantly decreased the leaves/plant, flowers/plant, dry flower weight, dry plant weight, concentration of chlorophyll, protein, and soluble sugars, and catalase enzyme activity in marigold plants. However, cadmium stress elevated the content of the guaiacol peroxidase enzyme, anthocyanins, phenols, and proline concentrations. The effects of priming with different organic materials yielded varying results across different traits, with the effects of vermicompost extract and beeswax pomace being more pronounced compared to tamarind extract. Additionally, as the severity of cadmium stress increased, the positive role of seed priming in mitigating negative stress effects became more evident. Particularly, at the stress level of 60 mg of cadmium per kg of soil, seed priming using vermicompost and beeswax resulted in approximately 66% and 54% increases in mean plant dry weight, respectively, compared to the control, while at the stress level of 40 mg, the increases were 12% and 7%, respectively. However, under non-stress conditions and at the 60 mg per kg cadmium stress level, priming did not affect chlorophyll content. Seed priming with organic materials, especially vermicompost and beeswax pomace, exerted different influences on the activities of GPX and catalase antioxidant enzymes under both stress and non-stress conditions. Under non-stress treatment, priming did not affect guaiacol peroxidase enzyme activity; however, at cadmium stress levels of 30 and 60 mg per kg, seed priming with vermicompost yielded higher guaiacol peroxidase enzyme activity compared to the control and other treatments. At the stress level of 40 mg of cadmium per kg, no significant differences were observed among the seed priming with vermicompost, beeswax, and cordia extract compared to the control. Meanwhile, the application of all three priming extracts (vermicompost, beeswax, and cordia) significantly increased catalase enzyme activity across all levels of cadmium stress, with seed priming using vermicompost and, to a lesser extent, beeswax pomace producing higher catalase enzyme levels than the control and other treatments. In this study, soluble sugar content increased under all three cadmium stress levels with the application of priming materials, with vermicompost and, to a lesser extent, beeswax pomace showing the best effects among the priming treatments. Furthermore, beeswax and vermicompost extracts led to a 44% increase in phenolic content in marigold plants under 30 and 40 mg per kg cadmium stress conditions.
ConclusionThe results of this study indicate that cadmium, as a heavy metal, has detrimental effects on the growth and biochemical attributes of marigold plants. According to the data obtained, increasing levels of cadmium resulted in a significant reduction in the leaves/plant, flowers/plant, dry flower weight, dry plant weight, chlorophyll and protein concentrations. However, cadmium stress led to an increase in the activity of antioxidant enzymes such as guaiacol peroxidase, as well as anthocyanins and phenols concentrations. Seed priming with organic materials, particularly vermicompost and beeswax pomace, significantly enhanced the plant's resistance to cadmium stress. At high levels of cadmium, these methods contributed to increased plant dry weight and enhanced antioxidant enzyme activities. Particulrlly, seed priming with vermicompost and beeswax pomace demonstrated greater efficacy in alleviating the negative effects of cadmium, allowing these methods to significantly maintain plant health under stress conditions through increased antioxidant activity and osmotic regulation. Therefore, these seed pre-treatment methods have the potential to be incorporated into agricultural optimization programs to enhance plant resistance to environmental stresses, particularly those arising from heavy metal contamination.
Keywords: Enzyme, Anthocyanins, Proline, Phenols -
علف های هرز به عنوان یکی از عوامل اصلی محدود کننده تولید زیره سبز شناخته شده اند. بنابراین، به منظور ارزیابی اثر روش مدیریت علف های هرز و نوع آبیاری بر کنترل علف های هرز زیره سبز آزمایشی به صورت کرت خردشده بر پایه طرح بلوکهای کامل تصادفی با سه تکرار در سال زراعی 1401-1400 در مزرعه تحقیقاتی دانشکده کشاورزی بردسیر، دانشگاه شهید باهنر کرمان انجام شد. تیمارهای آزمایش شامل نوع آبیاری در دو سطح (غرقاب و بارانی) و مدیریت علف های هرز در هفت سطح (وجین دستی علف های هرز، زمان مصرف علف کش تریفلورالین در شش سطح شامل عدم مصرف، مصرف در 3، 7، 14 و 21 روز قبل از کاشت زیره سبز) بودند. نوع آبیاری بر تراکم و وزن خشک علف های هرز، تعداد چتر در گیاه، عملکرد بیولوژیک، عملکرد دانه، درصد اسانس، عملکرد اسانس و کارآیی مصرف آب در سطح یک درصد و شاخص برداشت در سطح پنج درصد اثر معنی داری نشان داد. نوع مدیریت علف های هرز بر تراکم و وزن خشک علف های هرز، تعداد بوته سبزشده، ارتفاع گیاه، تعداد چتر در گیاه، عملکرد بیولوژیک، عملکرد دانه، عملکرد اسانس و کارآیی مصرف آب در سطح احتمال یک درصد و شاخص برداشت در سطح احتمال پنج درصد اثر معنی داری نشان داد. برهم کنش نوع آبیاری و مدیریت علف های هرز بر تراکم و وزن خشک علف های هرز، درصد اسانس و عملکرد اسانس در سطح یک درصد و عملکرد بیولوژیک و عملکرد دانه در سطح پنج درصد اثر معنی داری را نشان داد. نتایج این آزمایش نشان داد که آبیاری بارانی شرایط بهتری از نظر کنترل علف هرز و همچنین عملکرد دانه و اسانس زیره سبز نسبت به آبیاری غرقابی داشت. در بین تیمارهای علف کشی، کاربرد تریفلورالین سه روز قبل از کاشت نتیجه بهتری بر کنترل علف های هرز داشت. با افزایش فاصله کاشت زیره سبز از زمان مصرف علف کش، با وجود افزایش وزن خشک و تراکم علف هرز، عملکرد دانه و اسانس زیره سبز به ترتیب حدود 35 و 66 درصد بهبود یافت. در هردو شرایط آبیاری، وجین دستی علف هرز و تیمار کاشت زیره سبز پس از 21 روز مصرف علف کش بیشترین عملکرد دانه و اسانس را دارا بودند.
کلید واژگان: اسانس، آبیاری بارانی، تریفلورالین، کارایی مصرف آبIntroductionWeeds are the main factor limiting cumin production. Hand weeding is used as the most important and common method of weed management in cumin fields, which, in addition to spending a lot of time, takes a large part of the production cost. Cumin is weak in competition with weeds because it has a low and weak initial growth and establishment speed, and its biomass and height of its aerial organs are low, in addition, its root expansion is not very notable. The amount of weed damage in cumin cultivation is reported from 40 to 90 percentage depends on the type of weed species and density, the length of the competition period, cultivation conditions, control time and management of nutrients and in different conditions. Trifluralin (Treflan) is used by some farmers at planting time of cumin as a foliar spray in the soil or with irrigation water. Interviews conducted with farmers confirm that the use of this herbicide at the time of planting cumin affects the seeds of the plant to some extent and reduces the germination percentage of this plant, although some farmers also believe that there is no side effect in this case. Another challenge to successful cumin production, particularly in rainy years, is plant diseases. Wilt, leaf burn, and surface powdery mildew, caused by *Fusarium oxysporum*, *Alternaria burnsii*, and *Erysiphe polygoni*, respectively, are among the most significant diseases affecting cumin worldwide. Therefore, this study was carried out with the following objectives 1) Investigating the effect of trifluralin herbicide abuse at different intervals until planting, on the percentage of cumin seedling emergence.2) The effect of using trifluralin herbicide at different intervals until planting, on the population and growth of weeds.3) The effect of irrigation method on cumin yield4) Investigating the effect of irrigation method on the percentage and yield of cumin essential oil5) The effect of irrigation method on the contamination of cumin plants with Fusarium fungus6) Studying the water use efficiency in different irrigation and weed management
Materials and MethodsTherefore, in order to evaluate the effect of the weed management method and the type of irrigation on the control of weeds, an experiment was conducted as split-plot based on a randomized complete block design with 3 replications in the research farm of the Agricultural Faculty of Bardsir, Shahid Bahonar University of Kerman in 2022-2023. The experimental treatments include the type of irrigation in two levels (flooded and sprinkler) and weed management in seven levels (hand weeding, time of planting the cumin seeds after 3, 7, 14 and 21 days trifluralin herbicide application and no weed control).
Results and DiscussionThe type of irrigation showed a significant effect on weeds density and dry weight, the percentage of plant wilt, the number of umbrellas per plant, biological yield, seed yield, essential oil percentage, essential oil yield and water use efficiency at the level of 1% and the harvest index at the level of 5%. The method of weed management showed a significant effect on the density and dry weight of weeds, the number of emerged plants, plant height, the number of umbrellas per plant, biological yield, seed yield, essential oil yield and water use efficiency at the level of 1% and harvest index at the level 5%. The interaction effect of irrigation and weed management methods showed a significant effect on the density and dry weight of weeds, the of essential oil percentage and yield at the level of 1%, and the biological yield and yield of seeds at the level of 5%. The results of this experiment showed that sprinkler irrigation had better conditions in terms of weed and disease control as well as seed and essential oil yields compared to flood irrigation. Among the herbicide treatments, the application of trifluralin 3 days before planting had better weed control results. By increasing the distance of cumin planting from the time of herbicide application, despite the increase in weed dry weight and density, cumin seed yield improved. In both irrigation methods, treatments of hand weeding and cumin planting after 21 days of herbicide application had the highest yield of seed and essential oil.
ConclusionIn general, cumin planting 21 days after trifluralin application and using sprinkler irrigation were able to reduce the weed density and biomass to an acceptable level and on the other hand, they produced a good seed and essential oil yield which is recommended.
Keywords: Essential Oil, Sprinkler Irrigation, Trifluralin, Water Use Efficiency -
در این تحقیق به بررسی کارآیی شبکه عصبی مصنوعی در حل مسائل مکانیک تماس پرداخته می شود. مسائل تماس به دلیل پیچیدگی ذاتی و تکرر وقوع در سیستم های مهندسی از اهمیت خاصی برخوردار هستند و با وجود توانمندی روش های تحلیلی و عددی در حل این مسائل، مشکلات این روش ها در حل مسائلی با هندسه و بارگذاری های پیچیده همچنان باقی است. در این تحقیق توانایی شبکه عصبی برای محاسبه حدود نواحی تماس ناقص بدون اصطکاک برای هندسه های تک ناحیه ای و چندناحیه ای متقارن مورد بررسی قرار می گیرد. در این راستا از شبکه Perceptron چند لایه و الگوریتم لونبرگ مارکوات در شبکه عصبی نرم افزار MATLAB استفاده می شود و مدل بهینه شبکه برای هر مسئله با سعی و خطا به دست می آید. سپس کارآیی این الگوریتم برای هر کدام از موردهای مطالعه، ارزیابی و با سایر روش ها مقایسه می شود. نتیجه این تحقیق نشان می دهد که پاسخ مدل شبکه عصبی بهینه برای ورودی های تصادفی داخل محدوده داده های به کار گرفته شده برای یادگیری، برای یک تا سه خروجی، بسیار مطلوب و با دقت بیش از نود درصد در مقایسه با پاسخ روش های تحلیلی، نیمه تحلیلی و عددی می باشد.
کلید واژگان: شبکه عصبی، الگوریتم لونبرگ مارکوات، یادگیری شبکه، مکانیک تماس، تماس چندناحیه ای، نواحی تماس ناقصThis research investigates the performance of artificial neural network in solving contact problems, which are important due to their inherent complexity and prevalence in engineering systems. While analytical and numerical methods can solve some contact problems, they often struggle with complicated loading and geometries. This study specifically examines the neural network's capability to determine the extent of incomplete contact zones in symmetric geometries involving single and multiple contacts between frictionless surfaces. To achieve this, a multi-layer perceptron network is implemented using the Levenberg-Marquardt algorithm within MATLAB. The optimal network model for each problem is identified through a trial-and-error approach. Furthermore, the performance of this algorithm across all case studies is evaluated and compared with other methods. The findings demonstrate that the optimal neural network model can predict outcomes with over ninety percent accuracy when compared to analytical, semi-analytical, and numerical solutions. This accuracy is achieved for random inputs within the training data range and for one to three outputs. Such results underscore the potential of neural networks to deliver high precision across various applications.
Keywords: Neural Network, Levenberg-Marquardt Algorithm, Network Training, Contact Mechanics, Multiple Contacts, Incomplete Contact Zones -
زمینه و هدف
منظور از برون سپاری، انتقال خدمات یا کارکردهایی که به طور سنتی توسط خود سازمان انجام می شوند به یک تامین کننده خارجی است که کنترل آن ها از طریق قرارداد و یا مدیریت مشارکتی انجام می گیرد. هدف از تحقیق حاضر، تعیین اثرگذاری سیاست برون سپاری خدمات درمانی بر توسعه منابع انسانی بود.
روش کاراین پژوهش از نوع ترکیبی (کیفی و کمی) بود. در مرحله کیفی، تعداد 10 نفر از مدیران ارشد دانشگاه های علومپزشکی کلان منطقه دو (اردبیل، تبریز، ارومیه و دانشکده های علوم پزشکی خلخال، سراب، مراغه و خوی) مورد مصاحبه قرار گرفته و نتایج به روش گراندد تئوری و با استفاده از نرم افزار MAXQDA-3 تحلیل شد. در مرحله کمی، تعداد 380 نفر از کارکنان و مدیران دانشگاه های علوم پزشکی فوق که به روش نمونه گیری تصادفی طبقه ای انتخاب شده بودند، به پرسشنامه های فرآیند برون سپاری عملیات خدمات درمانی و مدیریت منابع انسانی، پاسخ دادند. تجزیه و تحلیل کمی داده ها با استفاده از نرم افزارهای SPSS-20 و Lisrel-10 با آزمون های معادلات ساختاری انجام شد.
یافته هانتایج نشان داد که تمامی عوامل شناسایی شده از جمله عوامل مداخله گر و زمینه ای برون سپاری عملیات خدمات درمانی بر توسعه منابع انسانی تاثیرگذار بودند. بر اساس تحلیل رگرسیون، تاثیر ابعاد و نشانگرهای فرآیندهای برون سپاری خدمات درمانی بر توسعه مدیریت منابع انسانی 0/59 بود.
نتیجه گیرینتایج، اثرگذاری سیاست برون سپاری خدمات درمانی بر توسعه منابع انسانی را تایید کردند. لذا، توصیه میشود جهت توسعه هر چه بیشتر منابع انسانی در سازمانها از سیاست برون سپاری خدمات درمانی استفاده شود.
کلید واژگان: خدمات درمانی، مدیریت منابع انسانی، برون سپاریBackgroundOutsourcing refers to the transfer of services or functions that an organization traditionally performs to an external provider, controlled by a contract or cooperative management. This research aims to determine the effectiveness of the treatment services outsourcing policy on the development of human resources.
MethodsThis was a mixed methods study with qualitative and quantitative phases responding to its purpose. In the qualitative phase, 10 senior managers of the Universities of Medical Sciences in the second major region (Ardabil, Tabriz, Urmia, Khalkhal, Sarab, Maragheh, and Khoy) were interviewed and the results were analyzed using the grounded theory method, and MAXQDA v3 software. In the quantitative phase, 380 employees and managers of the above-mentioned Universities were selected by stratified random sampling method and responded to the questionnaires on the outsourcing process of treatment service operations and human resource management. Quantitative data were analyzed using SPSS version 20 and Lisrel v10 software using structural equation testing.
ResultsThe results showed that all the identified factors, including the mediating and contextual factors of the outsourcing of treatment service operations, have an impact on the development of human resources. Furthermore, based on the regression analysis, the impact of dimensions and indicators of treatment service outsourcing processes on the development of human resource management was 0.59.
ConclusionThe results confirmed the effectiveness of the outsourcing policy of treatment services on human resources development. Therefore, it seems that performing more outsourcing of treatment services can positively influence the development of human resources.
Keywords: Treatment Service, Human Resources Management, Outsourcing -
در سال های اخیر استفاده از بیوچار توجه زیادی را به عنوان یک راهبرد قابل قبول برای افزایش بهره وری گیاهان به خود جلب کرده است. در این مطالعه، تاثیر سه نوع بیوچار کود گاوی (75/0، 25/1، 5/2 و 5 درصد وزنی)، پوست سبز گردو (75/0، 25/1، 5/2 و 5 درصد وزنی) و تفاله گل محمدی (75/0، 25/1، 5/2 و 5 درصد وزنی) به همراه عدم کاربرد بیوچار در قالب طرح کاملا تصادفی با 3 تکرار بر خصوصیات بیوشیمیایی، فیزیولوژیکی و عملکرد گیاه گاوزبان اروپایی در گلخانه تحقیقاتی دانشگاه شهید باهنر کرمان در سال 1400 مورد بررسی قرار گرفت. نتایج نشان داد که بیوچار تفاله گل محمدی و پوست سبز گردو به ترتیب بیشترین و کمترین میزان کربن آلی پایدار را دارا بودند. تیمارهای مورد بررسی بطور معنی داری (p ≤0.01) صفات بیوشیمیایی، فیزیولوژیکی و عملکرد گاوزبان اروپایی را تحت تاثیر قرار دادند. استفاده از بیوچار تفاله گل محمدی و کود گاوی موجب افزایش معنی دار (p ≤0.01) عملکرد و رنگیزه های فتوسنتزی نسبت به شاهد شدند. استفاده از بیوچار گل محمدی به میزان 5/2 درصد وزنی باعث افزایش 119 درصدی وزن اندام هوایی نسبت به تیمار عدم کاربرد بیوچار شد. تیمار 25/1 درصد وزنی از کود گاوی نیز 7/29 درصد وزن تر اندام هوایی را افزایش داد. بیوچار گردو نه تنها تاثیر مثبتی بر رشد و عملکرد گیاه نداشت، بلکه باعث کاهش رشد و عدم تولید گل در گاوزبان اروپایی شد. فعالیت آنزیم کاتالاز در تیمار 5/2 درصد بیوچار تفاله گل محمدی (47/0 واحد بر گرم پروتیین) و 25/1 درصد بیوچار کود گاوی (64/ 0 واحد بر گرم پروتیین) حداکثر بود، میزان پرولین نیز در تیمار75/0 درصد بیوچار پوست گردو (6/10 میکرومول بر گرم وزن تر) به طور معنی داری افزایش یافت. بطور کلی، نتایج نشان داد از بین بیوچارهای مورد بررسی، بیوچار تفاله گل محمدی با نسبت 5/2 درصد وزنی مناسب ترین تیمار از نظر بهبود خصوصیات فیزیولوژیکی و رشدی گاوزبان اروپایی بود.کلید واژگان: پرولین، کاتالاز، گیاه دارویی، هدایت الکتریکیIntroductionBorage (Borago officinalis L.) is a valuable annual medicinal herb suitable for cultivation in many countries, including Iran. Borage is considered as a native of both Europe and Asia. Several species around the world fall under the denomination of “borage”. The presence of the γ-linolenic acid in the seeds of borage makes borage distinctively important mainly for the nutraceutical and pharmaceutical research. γ-Linolenic acid is an omega -6 polyunsaturated fatty acid which cannot be synthesized in the body and hence falls into the category of essential fatty acids (Evesh et al., 2019).
Chemical fertilizer is an indispensable abiotic factor in agricultural production, especially nitrogen fertilizer. However, in order to improve the yield, people fertilize a lot, which not only wastes resources, but also brings a series of serious problems to the environment, such as greenhouse gas emissions, soil fertility degradation and water resources pollution. Therefore, developing new fertilizers, improving crop nutrient utilization efficiency, replacing chemical fertilizers and reducing environmental pollution is an important direction of agricultural sustainable developme (Zhang et al ., 2020).
Biochar is a carbon rich product formed by pyrolysis of agricultural and forestry wastes under limited air availability. It is generally alkaline in nature, with the characteristics of rich carbon content, large specific surface area and strong adsorption. Biochar addition can reduce soil bulk density and increase porosity, pH, water holding capacity and nutrient content. Additionally, the unique physical properties of biochar can also promote the colonization and growth of some specific microorganisms, which may participate in the mineralization of biochar and promote nutrient cycling. Therefore, biochar has been widely used on improving soil quality and increasing crop productivity. Biochar has a positive effect on root structure and nutrient absorption of plant. Several studies have shown biochar can significantly increase the root length, root biomass, root surface area and specific root length. The study also found that biochar significantly increased the number of plant root tips, the most active part of root, and then increased the ability of plants to absorb nutrients from soil (Zhang et al, 2020).
Materials and MethodsIn order to evaluate the effect of damask rose waste (DRW), walnut green skin waste (WGW) and cow manure biochars on biochemical, physiological and yield characteristics of European borage, an experiment was carried out based on a completely randomized design at the greenhouse conditions in Faculty of Agriculture, Shahid Bahonar University of Kerman. The experimental treatments contain: without of biochar (control), biochars of cow manure (0.75%, 1.25%, 2.5% and 5% w/w), walnut green skin biochar (WGW) (0.75%, 1.25%, 2.5% and 5% w/w) and damask rose waste biochar (DRW) (0.75, 1.25, 2.5 and 5% w/w). The physicochemical properties of the biochars and soil were analyzed. Five seeds were planted in three-kilogram pots at a depth of 1.5 to 2 cm. The greenhouse was maintained at an average temperature of 25 °C during the day and 20 °C at night, with a relative humidity level of 60%. Upon concluding the experiment, various biochemical, physiological, and functional characteristics of European borage were assessed and measured.
Results and DiscussionThe results showed that DRW (60%) and WGW (13%) biochars had the highest and lowest amount of stable organic carbon, respectively. The investigated treatments significantly (p≤ 0.01) affected the biochemical, physiological and performance traits of European borage. Application of DRW and manure biochars caused a significant (p ≤ 0.01) increase in yield and photosynthetic pigments of European borage compared to the control. Applying WGW biochar at the level of 2.5% increased the shoot dry weight of the plant by 119% compared to the control treatment. Application of 1.25% of cow manure biochar also increased the shoot dry weight by 29.7%. WGW biochar applying not only had no positive effect on the growth and yield of the European borage, but also lead the decreasing growth and prevent flower production of borage. The highest CAT activity related to applying 2.5% of DRW biochar and 1.25% of manure biochar. Application of WGW in concentration of 0.75% significantly increased the proline contents. Using biochar improves soil fertility.
ConclusionIn general, applying DRW biochar in concentration of 2.5% and cow manure biochar in concentration of 1.25% were the most suitable treatments.Keywords: Catalase, Electrical conductivity, Medicinal plant, Proline, Pyrolysis -
زمینه و هدف
منظور از برون سپاری، انتقال خدمات یا کارکردها (که به طور سنتی توسط خود سازمان انجام می شوند) به یک تامین کننده خارجی است و کنترل آن ها از طریق قرارداد و یا مدیریت مشارکتی انجام می گیرد. هدف از تحقیق مورد نظر تبیین الگوی فرآیند برون سپاری عملیات خدمات درمانی مبتنی بر رویکرد حکمرانی خوب می باشد.
روش کاراین پژوهش از لحاظ روش تحقیق از نوع داده بنیاد بود. جامعه و نمونه آماری مرحله کیفی، مدیران ارشد دانشگاههای علوم پزشکی کلان منطقه 2 به تعداد 10 نفر بودند که مورد مصاحبه قرار گرفتند. در سه مرحله اساسی کدگذاری انجام شده و طبق نتایج تحلیل، سوال های تحقیق بدست آمده با 6 عامل دسته بندی شدند . بنابراین می توان بیان نمود که تمامی عوامل شناسایی شده جزیی از مدل الگوی فرآیندی برون سپاری عملیات خدمات درمانی به شمار می روند و طبق مدل بدست آمده و نتایج مدل های اندازه گیری شده، می توان گفت همه ابزارهای پژوهش، برازش مناسب و قابل قبول داشتند.
یافته هادر ابعاد و نشانگرهای الگوی فرآیندی برون سپاری عملیات خدمات درمانی، مقوله های «مدیریت سازمانی، مدیریت تقاضای بیماران، مدیریت منابع مالی، مدیریت نیروی انسانی، مدیریت فرآیند کسب و کار، فناوری اطلاعات و مدیریت دسترسی پذیری خدمات توسط بیماران»؛ درپیامدهای تاثیرگذار، مقوله های «ادغام درون سازمانی خدمات و ادغام برون سازمانی خدمات»؛ در عوامل علی اثرگذار، مقوله های «سیستم مدیریتی و همگام سازی نیروی انسانی با خدمات مشتری مداری»؛ در عوامل مداخله گر اثرگذار، مقوله های «دانش فنی و تخصصی، سیستم نظارتی، سیاستهای سازمانی، آیین نامه ها و قوانین و سیستم اطلاع رسانی»؛ در عوامل زمینه ای اثرگذار، مقوله های «سیستم عرضه و تقاضای خدمات، سرمایه گذاری و شرایط رقابتی حاکم» و در راهبردهایی برای مدیریت، مقوله های «اخلاق حرفه ای، معنویتگرایی» مورد تایید قرار گرفتند.
نتیجه گیریاین پژوهش با رویکرد کیفی، الگوی فرآیند برون سپاری عملیات خدمات درمانی مبتنی بر رویکرد حکمرانی خوب را در قالب یک نظریه ارایه نموده است و از طریق آن می توان کارایی برون سپاری خدمات درمانی را به خوبی تفسیر و تبیین کرد.
کلید واژگان: برون سپاری، خدمات درمانی، حکمرانی خوبJournal of Health, Volume:14 Issue: 3, 2023, PP 298 -310Background & objectivesOutsourcing refers to the transfer of services or functions (which are traditionally performed by the organisation itself) to an external supplier, and their control is done through a contract or cooperative management. This study aimed to explain the medical service operations outsourcing process model based on the good governance approach.
MethodsIn this research, a grounded theory approach was used. The population and statistical sample of the qualitative stage were ten senior managers of medical sciences universities in Region 2 who were interviewed. Coding was done in three basic steps according to the analysis results. The research questions obtained were categorised into six factors. Therefore, all the identified factors are part of the outsourcing process model of medical service operations. According to the model and the results of the measured models, all the research tools had a suitable and acceptable fit.
ResultsThe study examined the outsourcing process model of treatment service operations and identified various components, influential consequences, effective causal factors, effective intervening factors, effective background factors, and strategies for management. The components of the outsourcing process model included organizational management; patients demand management, financial resources management, human resource management, business process management, information technology, and management of service accessibility by patients. The influential consequences of the model included the integration of intra-organizational services and the integration of extra-organizational services. The effective causal factors of the model included the management system and synchronization of the workforce with customer-oriented services. The effective intervening factors of the model included technical and specialized knowledge, supervisory system, organizational policies, regulations and laws, and notification system. The effective background factors of the model included the service supply and demand system, investment, and prevailing competitive conditions. Lastly, the strategies for management included professional ethics and spiritualism.
ConclusionWith a qualitative approach, this research has presented the pattern of the process of outsourcing treatment services operations based on the good governance approach in the form of a theory, and through it, the efficiency of treatment service outsourcing can be well interpreted and explained.
Keywords: Outsourcing, Treatment Services, Good Governance -
این پژوهش با هدف واکاوی پدیدارشناسانه تجارب زیسته اعضای هییت علمی از تدریس دروس کشاورزی در سکوی آموزش مجازی به روش کیفی انجام شد. جامعه آماری پژوهش، اعضای هییت علمی دانشگاه اراک بود. مشارکت کنندگان 30 نفر از اعضای هییت علمی دانشکده کشاورزی و محیط زیست بودند که به روش نمونه گیری هدفمند و با رعایت تنوع و همگونی در سال تحصیلی 1402-1401 انتخاب شدند. داده های کیفی به شیوه مصاحبه نیمه ساختاریافته با 5 سوال باز پاسخ تا مرحله اشباع نظری گردآوری شد. از روش تحلیل تماتیک به عنوان روشی برای شناخت، تحلیل و گزارش نتایج موجود در داده های کیفی به دست آمده از مصاحبه ها استفاده شد. به منظور اطمینان از صحت یافته های پژوهش چهار معیار پیشنهادی اسپزیال، استروبرت و کارپنتر مورد استفاده قرار گرفت. برای تحلیل داده ها در ابتدا پیاده سازی متن صورت گرفت و پس از تعریف واحد تحلیل، مقوله ها تعریف و سپس مقوله ها کدبندی شدند برای کدگذاری داده ها از نرم افزار MaxQDA استفاده شد. یافته های پژوهش در خصوص تجارب زیسته اعضای هییت علمی از آموزش مجازی دوران کرونا، شامل ترویج و آموزش، تسهیلگری، ضعف زیرساختی و اثرات روانی بود. همچنین از زاویه دید آن ها فرصت های آموزش مجازی شامل: تقویت مهارت فناوری آموزشی، گسترش مهارت تدریس برخط، تقویت زیرساخت ترویج و آموزش مجازی بود. همچنین تهدیدهای آموزش مجازی شامل مسایل آموزشی، عدم حضور شناختی، مشکلات زیرساختی و فقدان قوانین بود. درنهایت آن ها در مقابل تهدیدهای آموزش مجازی راهکارهای اثربخش کردن ترویج و آموزش، تقویت زیرساخت ها و وضع قوانین را مطرح کردند. با توجه به نتایج پژوهش حاضر پیشنهاد می شود مهارت تدریس و تولید محتوا در میان استادان دانشکده کشاورزی تقویت، زیرساخت ها بهبود و قوانین مشخصی در زمینه ترویج و آموزش مجازی تدوین شود.
کلید واژگان: واکاوی، پدیدارشناسی، تجارب زیسته، اعضای هیئت علمی، آموزش مجازی، پاندومی کروناThis research was conducted with the aim of phenomenological analysis of faculty members' lived experiences about teaching agriculture courses in the virtual education platform during Corona Virus pandemic using a qualitative approach. The statistical population of the research was the faculty members of the Faculty of Agriculture and Environment of Arak University. Out of the population and with respect to the diversity and homogeneity in the academic year of 2022-2023, 20 faculty members were selected as a sample by purposeful sampling. Qualitative data were collected through five semi-structured interviews with open some questions until the emergence of the theoretical saturation. The thematic analysis was used as a method to recognize, analyze, and report the results obtained from the qualitative interviews. Four criteria proposed by Spezial, Strobert and Carpenter were used to check and ensure the validity of the research findings. In the first stage of the data analysis, the information was written and presented in the form of some draft texts. After defining the unit of analysis, the categorization and coding the concepts were implemented. MaxQDA software was used to code the collected data. The findings of the research regarding the phenomenological analysis of faculty members' lived experiences about teaching agriculture courses in the virtual education platform during Corona Virus pandemic included factors like training, facilitation, infrastructural weakness, and psychological effects. From the participants’ point of view, virtual education opportunities included strengthening educational technology skills, expanding online teaching skills, expanding education, and strengthening virtual education infrastructure. Also, the threats of virtual education included educational issues, lack of cognitive presence, infrastructural problems, and lack of rules. It is worth mentioning that although the participants listed some threats for the virtual education, they proposed some solutions to make education more effective, strengthen infrastructures, and establish laws. According to the results of the present research, improving the teaching and content production skills among the professors of the agricultural college, improving the infrastructure of virtual education, and formulating specific rules in the field of virtual education were highlighted as the main practical recommendations.
Keywords: Analysis, Phenomenology, Lived experiences, Faculty Members, Virtual Education, Corona Virus pandemic -
پیشینه و اهداف
امروزه امر آموزش در مدارس نیازمند به کارگیری روش هایی است که یادگیری برای دانش آموزان را لذت بخش و موثر نماید. از سوی دیگر، کاربست پیشنهادها و توجه به نتایج این پژوهش می تواند سبب تغییر نگرش معلمان، برنامه ریزان و سیاستگذاران آموزشی نسبت به کاربرد هرچه بیشتر و هدفمندتر رویکردهای جدید در آموزش شود. پژوهش حاضر با هدف بررسی تاثیر یادگیری ریاضی به روش واک بر نگرش و عملکرد تحصیلی دانشموزان دوره ابتدایی در آموزش مجازی دوران کرونا انجام شده است.
روش هاروش پژوهش، شبه تجربی با طرح پیش آزمون- پس آزمون با گروه کنترل است. جامعه آماری شامل کلیه دانش آموزان دختر پایه پنجم شهر اراک در سال تحصیلی 1401-1400 بود که از میان آن، 30 دانش آموز به روش نمونه گیری در دسترس انتخاب و به صورت تصادفی به دو گروه آزمایش (15) و کنترل (15) تقسیم شدند. گروه آزمایش 12 جلسه به صورت برخط، مفاهیم ریاضی را با کمک راهبرد واک در برنامه آموزش مجازی شبکه شاد آموزش دیدند. هر دو گروه در آغاز و اتمام آموزش، از طریق پرسش نامه های نگرش درس ریاضی آیکن (1978) و آزمون محقق ساخته درس ریاضی مورد ارزیابی قرار گرفتند. برای تحلیل داده ها از از آمار توصیفی (میانگین و انحراف استاندارد) و آمار استنباطی (تحلیل کوواریانس برای آزمون فرضیه ها) استفاده شد.
یافته هایافته های حاصل از پژوهش نشان داد که بین دو گروه کنترل و آزمایش، در نگرش و عملکرد تحصیلی تفاوت معنادار وجود دارد(P<0.05) و روش واک منجر به افزایش عملکرد، نگرش به ریاضی دانش آموزان شده است.
نتیجه گیریبا توجه به یافته های پژوهش می توان نتیجه گرفت که راهبرد واک به دلیل استفاده از محتواهای بصری، شنیداری، عملکردی و توجه به سبک های یادگیری موجب افزایش نگرش و عملکرد ریاضی دانش آموزان شده است.
کلید واژگان: یادگیری به روش واک، عملکرد ریاضی، نگرش ریاضی، آموزش مجازیBackground and ObjectivesToday, education in schools requires the use of methods that make learning enjoyable and effective for students. On the other hand, applying the suggestions and paying attention to the results of this research can change the attitudes of teachers, planners, and educational policy makers towards using more innovative approaches in education. The present study was conducted with the aim of investigating the effect of learning mathematics using the VAK(Visual Auditory Kinesthetic) method on the attitudes and academic performance of primary school students in virtual education during the Corona period.
MethodsThe research method was quasi-experimental with a pre-test-post-test design with a control group. The statistical population included all fifth-grade female students in Arak in the academic year of 1401-1400, out of which 30 students were randomly selected and assigned to experimental (15) and control (15) groups. The experimental group learned 12 online sessions of mathematical concepts with the help of the VAK strategy in the Shad Network e-learning program. Both groups were evaluated at the beginning and end of the training period through Aiken's (1978) attitudes towards mathematics questionnaire and the researcher-made math test. Descriptive statistics (mean and standard deviation) and inferential statistics (analysis of covariance to test hypotheses) were used for data analysis.
FindingsThe results of the research showed that there was a significant difference between the experimental and control groups in terms of the attitudes and academic performance (P<0.05) and the walk method led to an increase in the students' performance and attitudes towards mathematics.
ConclusionAccording to the findings of the research, it can be concluded that the walk strategy would increase the students' mathematical attitudes and performance due to using of visual, auditory, functional content and paying attention to learning styles.
Keywords: learning by Visual, Auditory Kinesthetic method, Math performance, math attitude, virtual education -
A recommender system is an integral part of any e-commerce site. Shilling attacks are among essential challenges in recommender systems, which use the creation of fake profiles in the system and biased rating of items, causing the accuracy to decrease and the correct performance of the recommender system in providing recommendations to users. The target of attackers is to change the rank of content or items corresponded to their interests. Shilling attacks are a threat to the credibility of recommender systems. Therefore, detecting shilling attacks it necessary to in recommender systems to maintain their fairness and validity. Appropriate algorithms and methods have been so far presented to detect shilling attacks. However, some of these methods either examine the rating matrix from a single point of view or use low-order interactions or high-order interactions. This study aimed to propose a mechanism using users' rating matrix, rating time, and social network analysis output of users' profiles by Gaussian-Rough neural network to simultaneously use low-order and high-order interactions to detect shilling attacks. Finally, several experiments were conducted with three models: mean attack, random attack, and bandwagon attack, and compared with PCA, Semi, BAY, and XGB methods using precision, recall, and F1-Measure. The results indicated that the proposed method is more effective than the comparison methods regarding attack detection and overall detection, which proves the effectiveness of the proposed method.
Keywords: Recommender System, Shilling Attack, Collaborative Filtering, Fake Profiles, Social Network -
زمینه
حضور زنان در اجتماع را با توجه به شایستگی ها و توانمندی های ذاتی و اکتسابی شان می توان به عنوان یک مقوله مهم اجتماعی در نظر گرفت. از ضرورت هایی که در جامعه امروزی مورد توجه قرار گرفته، لزوم حضور بانوان در برخی مشاغل و مسئولیت های اجتماعی خاص است و این ضرورت حضور، برای خدمات رسانی به افراد جامعه امری کاملا بدیهی و مشهود است. اسلام نیز بر اساس بسیاری از مدارک و مستندات حضور زنان در جامعه را تصدیق نموده است. مسئله مورد بحث در نوشتار حاضر این است که آیا زنان با توجه به توانایی ها و شایستگی های اکتسابی و فطری خود می توانند در مناصب مهم سیاسی و اجتماعی به نقش آفرینی بپردازند؟
نتیجه گیریبا علم به اینکه حفظ و تحکیم بنیان خانواده، از اساسی ترین ارکان مورد توجه دین اسلام است، قطعا حضور اجتماعی زنان نباید خلل و تزلزلی در این امر مهم ایجاد نماید. بر همین اساس، تحقیق پیش رو به بررسی نقطه نظرات دین مبین اسلام درباره حضور اجتماعی زنان بر اساس توانایی و قابلیت های ذاتی و اکتسابی شان می پردازد. اکنون که ضرورت حضور زن در جامعه کاملا منطقی و اجتناب ناپذیر است. سوال دیگری مطرح می شود که کیفیت حضور و ملاک و شرایط نقش آفرینی او در اجتماع با توجه به دستورات دینی و الزامات اخلاقی چگونه باید باشد؟ برای پاسخگویی به سوالات مذکور در تحقیق حاضر که به روش توصیفی - تحلیلی و با بهره گیری از منابع و ومتون کتابخانه ای به انجام رسیده است این نتیجه حاصل گردیده که مشارکت اجتماعی زنان در قالب اشتغال از دیدگاه اسلام طبق شرایطی مجاز شناخته شده است با این حال بایست به ضروریات و الزامات مربوط به آن نیز توجه داشت. از سوی دیگر اشتغال بی رویه زنان در جامعه امروز با چالش های اخلاقی متعددی روبرو است که از آن جمله می توان به «بی عدالتی و تکلیف مالایطاق»، «سوء استفاده و آزارهای جنسی علیه زنان»، «عدم تمایل به فرزندآوری»، «ایجاد روحیه تقابل بین همسران» و «جدایی و طلاق» اشاره نمود.
کلید واژگان: نقش آفرینی زنان، اجتماع، اخلاقBackgroundThe presence of women in society can be considered as an important social category according to their inherent and acquired competencies and abilities. One of the necessities that has been considered in today's society is the need for women to be present in some jobs and special social responsibilities, and this necessity for attending to provide services to people in society is quite obvious and obvious. Islam has also confirmed the presence of women in society based on many documents. The issue discussed in this article is whether women, given their acquired and innate abilities and competencies, can play a role in important political and social positions?
ConclusionKnowing that maintaining and strengthening the foundation of the family is one of the most important pillars of Islam, certainly the social presence of women should not disrupt this important matter. Accordingly, the present study examines the views of the religion of Islam on the social presence of women based on their innate and acquired abilities and capabilities. Now that the necessity of a woman's presence in society is completely logical and inevitable. Another question arises that what should be the quality of his presence and the criteria and conditions of his role-playing in society according to religious orders and moral requirements? In order to answer the questions mentioned in the present study, which has been done in a descriptive-analytical method and using library sources and texts, it has been concluded that women's social participation in the form of employment is allowed from the Islamic point of view. Needs and requirements related to it should also be considered. On the other hand, the indecent employment of women in today's society faces many moral challenges, including "injustice", "sexual abuse and harassment against women", "unwillingness to have children" and "separation and divorce".
Keywords: Role of women, Society, Ethics -
شته سبز گندم، Sitobion avenae F. (Hem.: Aphididae)، یک آفت جهانی مهم برای گندم به علت خسارت مستقیم و انتقال ویروس می باشد. در مطالعه حاضر، تاثیر شش تیمار از جمله: (1) گندم با یک دوره ی شش روزه آلودگی به آفت، (2) گندم محلول پاشی شده با بیومین روی، (3) بذور گندم تیمار شده با Bacillus subtilis UTM96، (4 و 5) تیمار های تلفیقی بیومین روی + پیش آلودگی و B. subtilis + پیش آلودگی، و (6) همچنین یک تیمار شاهد بر ویژگی های زیستیS. avenae مورد آزمایش قرار گرفت. نتایج نشان داد که تفاوت معنی داری بین تیمارها از نظر برخی از محتویات متابولیت های ثانویه و ویژگی های زیستی شته وجود داشت. تیمار کردن با B. subtilis + پیش آلودگی و B. subtilis (20/298 و 17/292 میلی گرم بر میلی لیتر) میزان فنول کل در برگ های گندم را در مقایسه با بیومین روی + پیش آلودگی (63/183 میلی گرم بر میلی لیتر) افزایش داد. نرخ خالص تولید مثل (R0) S. avenae به طور معنی داری بوسیله تیمار B. subtilis + پیش آلودگی (533/1 نتاج به ازای هر فرد بالغ) در مقایسه با شاهد (887/6 نتاج به ازای هر فرد بالغ) کاهش یافت. تیمار کردن با B. subtilis + پیش آلودگی (022/0 بر روز) به طور معنی داری نرخ ذاتی افزایش جمعیت (r) S. avenae در مقایسه با شاهد (105/0 بر روز) کاهش داد. کم ترین (024/0) و بیش ترین (058/0) شاخص رشد پورگی (NGI) شته به ترتیب در تیمارهای B. subtilis + پیش آلودگی و شاهد به دست آمد. بنابراین، می توان نتیجه گرفت که B. subtilis + پیش آلودگی در گیاه گندم می تواند باعث القای مقاومت سیستمیک نسبت به S. avenae شود که می تواند در برنامه مدیریت تلفیقی (IPM) این شته استفاده شود.
English grain aphid, Sitobion avenae (Fabricius), is an important worldwide phloem-feeding pest of wheat due to direct sucking damage and transmission of viruses. Here, we tested the effects of six treatments on the fitness traits of S. avenae including: (1) Wheat with a 6-days aphid infestation, (2) Wheat sprayed with Biomin zinc, (3) Wheat seed treated with Bacillus subtilis, and (4 and 5) Combined treatments of Biomin zinc+pre-infestation and B. subtilis+pre-infestation as well as (6) A control treatment. Results revealed that there were significant differences among treatments concerning some allelochemical contents and aphid fitness traits. Treated with B. subtilis+pre-infestation and B. subtilis increased the total contents of phenol in the wheat leaves versus Biomin zinc+pre-infestation (183.63 mg g-1 FW). The net Reproductive rate (R0) of S. avenae was significantly reduced by B. subtilis+pre-infestation (1.533 offspring per adult) compared to the control (6.887 offspring per adult). Treated with B. subtilis+pre-infestation (0.022 d-1) significantly reduced the intrinsic rate of increase (r) of S. avenae compared with the control (0.105 d-1). The lowest (0.024) and highest (0.058) Nymph Growth Index (NGI) of aphid were found on B. subtilis+ pre-infestation and the control, respectively. Hence, it was concluded that B. subtilis+pre-infestation in wheat plants can induce systemic resistance to S. avenae, which can be used in the IPM of this aphid.
Keywords: Age-stage, Aphid, Bacillus subtilis, Life table, Plant-insect interactions -
در پژوهش حاضر، ریزساختار و خواص مکانیکی اتصال غیرمشابه میان فولاد زنگ نزن دوفازی 2304 و سوپر آلیاژ اینکونل 718 با استفاده از فرایند جوشکاری لیزر پالسی مطالعه و ارزیابی شد. هدف از انجام این پژوهش، با توجه به وجود خلا محسوس در این نوع اتصال و بررسی تحولات ریزساختاری در نواحی مختلف جوش و تاثیر پارامترهای جوشکاری لیزر بر خواص مکانیکی این اتصالات غیرمشابه است. بدین منظور، از روش طراحی آزمایش رویه پاسخ با تکنیک مرکب مرکزی برای بهینه سازی پارامترهای جوشکاری لیزر استفاده شد. محدوده پارامترهای موثر فرایند شامل توان لیزر، سرعت جوشکاری و عمق فوکوس به ترتیب 1000 تا1900 وات، 1 تا 5 میلی متر بر ثانیه و 1- تا 1 میلی متر درنظر گرفته شد. از آزمایش کشش تک محوره برای تعیین نیروی شکست اتصالات و از میکروسکوپ نوری برای مشاهده های ریزساختاری و تغییر و تحولات فازی بهره گرفته شد. نتایج به دست آمده حاکی از آن است که افزایش دو متغیر سرعت جوشکاری و عمق فوکوس در ابتدا باعث افزایش نیروی شکست اتصالات شده و پس از رسیدن به یک مقدار بهینه، نیروی شکست شروع به کاهش می کند. در این پژوهش بیشینه نیروی شکست اتصالات در توان 1900 وات، سرعت جوشکاری سه میلی متر بر ثانیه و عمق فوکوس صفر میلی متر محاسبه شد. با توجه به نتایج ریزساختار منطقه جوش، دندریت های هم محور در مرکز ناحیه جوش غالب هستند درحالی که در نزدیکی خط ذوب دندریت ها به صورت ستونی انجماد یافته اند. همچنین تغییرات سختی در نواحی مختلف اتصال بحث و بررسی شد. بر اساس نتایج، به دلیل انحلال رسوبات استحکام بخش نظیر TiC و NbC طی فرایند جوشکاری پرتوی لیزر، سختی ناحیه جوش نسبت به فلز پایه اینکونل 718 کاهش یافت.
کلید واژگان: فولاد زنگ نزن دوفازی، سوپرآلیاژ پایه نیکل، بهینه سازی، جوشکاری لیزرIn this research, microstructure and mechanical properties of laser welded joints between 2304 duplex stainless steel and Inconel 718 nickel-based super alloy were investigated. Microstructural evolution in the various areas of welded joints and also the effect of welding parameters on the mechanical properties of dissimilar joints were studied. Response surface methodology based on the central composite design was used in order to find the optimum welding parameters. Effective parameters of the welding process including laser power, travel speed and defocusing distance were set in the range of 1000 to 1900 W, 1 to 5 mm/s and -1 to 1 mm, respectively. Uniaxial tensile test was used to evaluate the fracture force of weld joints. The microstructural observations and phase evolutions were studied using optical microscope. It was found that the fracture force of the weld joints firstly increased by travel speed and defocusing distance and then decreased by further increase. The maximum fracture force was obtained when laser power, travel speed and defocusing distance were 1900 W, 3 mm/s and 0 mm, respectively. The center line of weld metal was mainly consisted of equiaxed grains where, columnar grains were formed in the fusion line. The obtained results from the hardness measurement showed that the hardness of Inconel 718 was decreased due to dissolution of TiC and NbC particles.
Keywords: Duplex stainless steel, Nickel based super alloy, Optimization, Laser welding -
مجله تحقیقات گیاهان دارویی و معطر ایران، سال سی و هفتم شماره 1 (پیاپی 105، فروردین و اردیبهشت 1400)، صص 13 -29
این تحقیق به منظور بررسی پتانسیل کشت مخلوط افزایشی اسطوخودوس (Lavandula angustifolia Mill.) و بابونه (Matricaria chamomilla L.) جهت بهبود کارایی مصرف نور به صورت فاکتوریل در قالب طرح بلوکهای کامل تصادفی با سه تکرار در مزرعه تحقیقاتی دانشکده کشاورزی بردسیر، دانشگاه شهید باهنر کرمان در سال زراعی 1397-1398 اجرا شد. تیمارها شامل کود در چهار سطح (1- شاهد، 2- NPK: 69، 46 و 25 کیلوگرم در هکتار، 3- کود گاوی: 20 تن در هکتار و 4- ترکیب NPK با کود گاوی به میزان نصف از هر کدام) و الگوی کاشت در سه سطح (1- کشت خالص اسطوخودوس، 2- کشت خالص بابونه و 3- کشت مخلوط افزایشی دو گیاه اسطوخودوس (گیاه اصلی) و بابونه (گیاه همراه)) بود. نتایج نشان داد که مجموع شاخص سطح برگ دو گیاه در کشت مخلوط به طور معنیداری بالاتر از کشت خالص هر دو گیاه بود. استفاده توام کود گاوی + NPK بالاترین میزان ماده خشک اسطوخودوس (868 کیلوگرم در هکتار)، عملکرد گل بابونه (366 کیلوگرم در هکتار)، درصد اسانس بابونه (0.56%) و اسطوخودوس (0.80%) و تشعشع جذبی (1321 مگاژول در متر مربع) را در تمامی الگوهای کاشت دارا بود. اختلاف معنیداری بین الگوهای کشت از نظر درصد اسانس مشاهده نشد. به دلیل هم پوشانی کانوپی دو گیاه در الگوی کشت مخلوط، میزان تشعشع فعال فتوسنتزی جذب شده طی فصل رشد در تیمار کشت مخلوط بالاتر از کشت خالص دو گیاه بود. نسبت برابری زمین (LER) بر حسب تشعشع در تیمارهای کودی بین 1.33 تا 1.37 متغیر بود. بالاترین میزان کارایی مصرف نور (1.63 گرم ماده خشک بر مگاژول تشعشع) برای بابونه در کشت مخلوط در تیمار کود گاوی + NPK حاصل شد. به طور کلی، نتایج تایید نمود که استفاده از تیمار کود گاوی + NPK و کشت مخلوط دو گیاه میتواند راه کار مناسبی برای استفاده کاراتر از نور و بهبود عملکرد کمی و کیفی دو گیاه باشد.
کلید واژگان: تشعشع فعال فتوسنتزی، نسبت برابری زمین، جذب نسبی، شاخص سطح برگThis study was conducted to investigate the potential of lavender (Lavandula angustifolia Mill.) and chamomile (Matricaria chamomilla L.) additive intercropping to improve the radiation use efficiency as a factorial based on the randomized complete block design with three replications at the research farm of Bardsir Agricultural Faculty, Shahid Bahonar University of Kerman, in 2018-2019 crop year. The experimental treatments included the fertilizer at four levels (1- Control, 2- NPK: 69-46-25 kg ha-1, 3- Cow manure: 20 t ha-1, and 4- Combination the half values of NPK and cow manure) and the planting pattern at three levels (1- Sole cropping of lavender, 2- Sole cropping of chamomile, and 3- Additive intercropping of lavender (main plant) and chamomile (associated plant)). The results showed that the total leaf area index of the two plants in intercropping was significantly higher than the sole cropping of them. The combined application of cow manure + NPK caused the highest lavender dry matter (DM) (868 kg ha-1), chamomile flower yield (366 kg ha-1), essential oil percentage of chamomile (0.56%) and lavender (0.80%), and radiation interception (1321 MJ m-2) in all the planting patterns. There was no significant difference between the planting patterns in terms of essential oil percentage. Due to the canopy overlap of the two plants in the intercropping, the value of photosynthetic active radiation (PAR) intercepted during the growing season in the intercropping treatment was higher than the sole cropping of both plants. The land equivalent ratio (LER) in terms of PAR (LERPAR) varied between 1.33 and 1.37 in fertilizer treatments. The highest radiation use efficiency (1.63 g DM MJ-1 radiation) was obtained for chamomile in the intercropping at the cow manure + NPK treatment. In general, the results illustrated that the application of cow manure + NPK treatment and intercropping of lavender and chamomile could be an appropriate approach for more efficient radiation use and improving the quantitative and qualitative yield of the two plants.
Keywords: Photosynthetic active radiation, Land equivalent ratio, relative intercept, leaf area index -
در این مقاله تخمین دنباله نویز شبه تصادفی (PN) با استفاده از الگوریتم بیشینه شباهت در نسبت های سیگنال به نویز پایین انجام شده است. ابتدا سیگنال دریافتی به بازه های زمانی تقسیم و ماتریس همبستگی روی این بازه ها برای تخمین مقادیر ویژه محاسبه می گردد. بردار ویژه متناظر با بزرگ ترین مقدار ویژه انتخاب شده و با استفاده از تبدیل SWT حذف نویز بر روی آن انجام می گیرد تا عدم هم زمانی دنباله و نرخ چیپ به دست آید. در گام آخر تخمین دنباله PN با الگوریتم زمان بندی بیشینه شباهت و فیلتر درون یابی انجام می شود. نتایج شبیه سازی به مقایسه روش پیشنهادی و روش های پیشین با معیارهای پیچیدگی محاسباتی و دقت تخمین دنباله PN و نرخ چیپ می پردازد. همچنین حداقل تعداد نمونه های اطلاعات موردنیاز برای تخمین نرخ چیپ و دنباله PN نیز بررسی می شوند. نتایج شبیه سازی نشان دهنده افزایش دقت تخمین دنباله PN به میزان 13% روش پیشنهادی نسبت به سایر روش ها است.کلید واژگان: تخمین دنباله PN، بردار ویژه، دنباله مستقیم، نرخ چیپ، معیار بیشترین شباهتThis study presents a Pseudo noise sequence (PN) estimation algorithm using maximum likelihood method in low signal to noise ratio. The received signal samples are divided into temporal segments. Then correlation matrix is computed for eigenvalue estimation. Eigenvector related to largest eigenvalue of this matrix is chosen and de-noised by stationary wavelet transform to find asynchronous of sequence and chip rate. The estimation of PN sequence, is found through a maximum likelihood algorithm for delay estimation and interpolation filter. Simulation results are applied to evaluate the proposed method and compare with previous methods in terms of computational complexity and accuracy of the chip rate and the PN estimation. Furthermore, minimum number of required samples are investigated for true estimation accuracy measurement. The results indicated that, the proposed method presented 13% better accuracy of PN sequence estimation compared to other methods.Keywords: PN sequence estimation, Eigen vector, direct sequence, chip rate, Maximum likelihood
-
Scientia Iranica, Volume:27 Issue: 6, Nov-Dec 2020, PP 2945 -2953
In this study, a computational technique is used to investigate the ability of a new MEMS gas actuator (MIKRA) for detection and sensation of the gas mixture. In this actuator, the temperature difference of two arms inside a rectangular domain at rarefied condition induces a Knudsen force which is relative to physical properties of the gas. Both 2d and 3D approaches are applied for the simulation of the flow inside the model. In order to define the flow feature of a low-pressure gas inside the micro gas actuator, a high order equation of Boltzmann should be solved to attain reliable results. Since the domain of this micro gas is non-equilibrium, Direct Simulation Monte Carlo (DSMC) method is applied for the simulation of the model. According to obtained results, a three-dimensional model presents more reliable results and the effect of a gap for three-dimensional model clearly demonstrates the impact of this parameter on the effective Knudsen force
Keywords: Gas detection, Knudsen force, DSMC, Low-pressure gasactuators, MEMS actuator -
در این پژوهش، به منظور اتصال غیرمشابه میان ورق های فولاد زنگ نزن فریتی 430 و فولاد زنگ نزن دوفازی 2304 از فرایند جوشکاری لیزر Nd:YAG با حداکثر توان 280 وات استفاده گردید. در ابتدا به مطالعات ریزساختاری، تحولات فازی و تغییرات خواص مکانیکی در اثر جوشکاری پرداخته شد. سپس، بهینه سازی پارامتر های فرایند جوشکاری لیزر با هدف بهبود خواص مکانیکی و با استفاده از روش های آماری انجام شد؛ بنابراین؛ از روش طراحی آزمایش رویه سطح با تکنیک مرکب مرکزی جهت بهینه سازی پارامتر های موثر فرایند شامل توان لیزر، سرعت جوشکاری و عمق فوکوس استفاده شد و پارامتر های بهینه با درنظر گرفتن پاسخی مانند نیروی شکست اتصالات، تعیین شدند. بدین منظور، از آزمایش کشش تک محوره برای تعیین استحکام اتصالات و از میکروسکوپ نوری برای مشاهدات ریزساختاری و تغییر و تحولات فازی بهره گرفته شد. نتایج نشان می دهد که، با کاهش سرعت جوشکاری و افزایش توان لیزر میزان نیروی شکست اتصالات، حداکثر تا 3587 نیوتن افزایش می یابد. با توجه به نتایج تغییرات ریزساختاری، رشد دانه ها و وجود کاربید های پراکنده در منطقه جوش مشاهده گردید. همچنین تاثیر حرارت ورودی ناشی از تغییر پارامتر های جوشکاری لیزر، بر روی پروفیل ریزسختی مورد بحث و بررسی قرار گرفت. بر اساس نتایج، حداکثر میزان سختی در منطقه جوش نمونه ی با حرارت ورودی کم به دست آمد که میزان آن در حدود 332 ویکرز اندازه گیری شد.کلید واژگان: جوشکاری لیزر ضربانی، فولادهای زنگ نزن فریتی، فولادهای زنگ نزن دوفازی، تحولات فازی، ریزساختارIn this research, dissimilar joint between AISI 430 ferritic stainless steel and AISI 2304 duplex stainless steel was made by Nd:YAG laser welding process. At first, microstructural and phase evolutions and also changes in mechanical properties due to the welding process were investigated. Hence, mechanical properties of weld joints were optimized using statistical methods. For this purpose, response surface methodology based on central composite design was used in order to find the optimum values of laser power, welding speed and defocusing distance and to obtain the maximum value of fracture force of joints. Uniaxial tensile test and optical microscopy were used to study the mechanical properties and structural features of weld joints, respectively. It was found that the fracture force of weld joints increases by decrease in welding speed and laser power and the maximum fracture force reached to 3587 N. Regarding microstructural evolutions studies, grain growth and presence of dispersed carbides in the fusion zone were observed. Finally, the effect of heat input on the hardness profile was evaluated and discussed. According to the result, the maximum hardness was obtained in the weld metal of the sample with low heat input and it was measured at about 332 vickers.Keywords: Pulsed laser welding, Ferritic stainless steel, duplex stainless steel, Phase evolutions, Microstructure
-
در این پژوهش یک تکنیک کالیبراسیون دیجیتال برای جبران سازی خطای مدولاتور سیگما-دلتا غیرفعال ارایه شده است. تابع تبدیل انتگرال گیر غیرفعال با تابع تبدیل انتگرال گیر ایده آل استفاده شده در مدولاتورهای سیگما-دلتا متفاوت است، این تفاوت باعث ایجاد تغییر در تابع تبدیل سیگنال و نویز می شود که به خطا در خروجی مدولاتور و تخریب نسبت سیگنال به نویز می انجامد. در اینجا یک مدل خطا ارجاع شده به خروجی برای این خطاهای ناشی از تابع تبدیل انتگرال گیر غیرفعال ارایه شده است که بر اساس این مدل خطا، جبران سازی با استفاده از فیلترهای وفق پذیر دیجیتال انجام خواهد شد. برای شناسایی عوامل فیلتر وفقی سیگنال آزمون شبه نویز یک بیتی به ورودی مدولاتور سیگما-دلتا غیرفعال تزریق شده است، شناسایی عوامل خطا به وسیله همبستگی سیگنال های خروجی و سیگنال آزمون انجام شده است. شبیه سازی برای مدولاتورهای مرتبه اول و دوم موثربودن جبران سازی خطای ذاتی مدولاتور ناشی از انتگرال گیر غیرفعال را نشان می دهد.
کلید واژگان: مبدل آنالوگ به دیجیتال، مدولاتور غیرفعال، انتگرال گیر غیرفعال، جبران سازی دیجیتال، سیگنال تست، جبران سازی پس زمینهThis paper proposes a digital adaptive calibration to compensate passive ΔΣ modulator error based on output-referred error model of passive integrator. The passive integrator transfer function, which leads to gain and phase errors, degenerates the performance of modulator due to signal attenuation in modulator loop. To identify the adaptive filter factors, a 1-bit pseudo-random noise test signal is applied to the input of the passive ΔΣ modulator. The error factors are identified by making correlation between output and test signals. The simulations show the effectiveness of the intrinsic error compensation of the modulator.
Keywords: Analog to digital converter (ADC) passive sigma-delta modulator passive switched-capacitor integrator digital calibration test signal background calibration -
The main aim of this paper is to investigate bending behavior in sandwich plates with functionally graded carbon nanotube reinforced composite (FG-CNTRC) face sheets with considering the effects of carbon nanotube (CNT) aggregation. The sandwich plates are assumed resting on Winkler-Pasternak elastic foundation and a mesh-free method based on first order shear deformation theory (FSDT) is developed to analyze the deflection of sandwich plates. In the face sheets, volume fraction of CNTs and their clusters are considered to be changed along the thickness. To estimate the material properties of the nanocomposite, Eshelby-Mori-Tanaka approach is applied. In the mesh-free analysis, moving least squares (MLS) shape functions are employed to approximate the displacement field and transformation method is used for imposition of essential boundary conditions. The effects of CNT volume fraction, distribution and degree of aggregation, and also boundary conditions and geometric dimensions are investigated on the bending behavior of the sandwich plates. It is observed that in the same value of cluster volume, FG distribution of clusters leads to less deflection in these structures.Keywords: Bending, Aggregated carbon nanotube, Sandwich plates, Elastic foundation, Mesh-free method
-
در این پژوهش تاثیر بستر و تراکمهای کاشت بر کنترل علف های هرز و همچنین رشد و عملکرد گندم بهصورت آزمایش کرتهای خرد شده در قالب طرح بلوک های کامل تصادفی با سه تکرار در شهرستان گیلان غرب در سال زراعی 94-1393 مورد ارزیابی قرار گرفت. تیمارهای آزمایش شامل نوع بستر بذر در سه سطح (بستر دروغین، بستر زود هنگام و بستر کاشت رایج منطقه) به عنوان کرت اصلی و میزان کاشت بذر گندم در سه سطح (150، 200 و 250 کیلوگرم بذر در هکتار) به عنوان کرت فرعی بود. نتایج نشان داد که صفات زیستتوده و تراکم علفهرز، ارتفاع بوته، تعداد پنجه، وزن هزار دانه، عملکرد دانه و میزان پروتئین دانه تحت تاثیر اثر متقابل نوع بستر و میزان کاشت بذر قرار گرفت. اثرات ساده نوع بستر و میزان کاشت بذر تاثیر معنیداری بر تعداد سنبله و درصد خوابیدگی بوته داشت. استفاده از بسترهای کاشت زود هنگام و دروغین به طور معنی داری سبب کاهش تراکم (به ترتیب 13 و 46 درصد) و زیستتوده (به ترتیب 17 و 49 درصد) علف های هرز و افزایش تعداد پنجه بارور (به ترتیب 11 و 20 درصد) ، تعداد سنبله (به ترتیب 4 و 19 درصد) ، عملکرد زیستتوده (به ترتیب 23 و 14 درصد) ، عملکرد دانه (به ترتیب 13 و 4 درصد) و درصد پروتئین دانه (به ترتیب 11 و 34 درصد) گندم نسبت به بستر کاشت معمولی شد. افزایش تراکم گندم تاثیر مثبتی بر کنترل علف های هرز داشت. بیشترین عملکرد دانه گندم (95/6 تن در هکتار) در بستر کاشت زودهنگام و تراکم کاشت 150 کیلوگرم بذر گندم در هکتار حاصل شد. عملکرد دانه گندم در تراکم های کاشت 150 و 200 کیلوگرم بذر گندم در هکتار به ترتیب حدود 19 و 14 درصد بیشتر از تراکم 250 کیلوگرم بذر گندم در هکتار بود. به طورکلی، استفاده از بسترهای کاشت دروغین و زودهنگام به همراه تراکم کاشت 150 تا 200 کیلوگرم بذر گندم در هکتار توصیه می گردد.کلید واژگان: بستر زودهنگام، بستر دروغین، پروتئین دانه، خوابیدگیIntroductionWheat (Triticum aestivum L.) is the prominent cereal food grain and major staple food in Iran. However, weed infestation is a major bottleneck to higher wheat productivity, and accounts for more than 48% loss of potential wheat yield. Weeds are omnipresent pests that compete with crops for water, nutrients, space, and light; host pests and diseases; and release allelochemicals into the rhizosphere. The magnitude of weed-related losses, however, depends on the type and density of a particular weed species, its time of emergence, and the duration of interference. Yield losses are most severe when resources are limited and weeds and crops emerge simultaneously. Crop yields decrease with increasing weed competition. A strong relationship exists between the duration of competition and the competition pressure exerted on the crop, which reduces yield. Stale seedbeds are a long-established practice that can be used with supplemental herbicides in conventional systems or without them in organic systems. The aim of the study was assessing the effect of various seedbed and wheat density on weed control, and growth and yield of wheat.Materials and MethodsThe experiment was conducted in a split plot arrangement based on randomized complete block design with three replications. The seedbed (false, stale and conventional seedbed) were assigned to main plots and wheat density (150, 200 and 250 kg seed ha-1) were randomized in subplot. The spacing between the planting rows was 20 cm. The required fertilizers were applied based on the results of soil analysis and by phosphate di-ammonium (150 kg ha-1) and urea (250 kg ha-1). Also, other planting operations such as irrigation were applied uniformly to all treatments. Weed control was not carried out in growth stages.Results and DiscussionThe results showed that dry weight and density of weed, plant height, number of tiller, 1000-seed weight, grain yield and seed protein contents were affected by interaction of seedbed and plant density. Simple effect of seedbed and plant density had a significant effect on number of spike and lodging percentage of wheat. Using false and stale seedbeds led to reducing weed density and dry weight, and increasing number of tiller, number of spike, biological and grain yield and protein contents rather than conventional planting conditions, significantly. Increasing plant density had a positive effect on weed control. It seems that increasing wheat density increased the competitiveness of plant species by decreasing access to enough light and nutrients, and led to eliminating the weeds. The highest grain yield (6.95 t ha-1) was assigned to stale seedbed and density of 150 kg seed ha-1. Grain yield in densities of 150 and 250 kg seed ha-1 was higher than density of 250 kg seed ha-1.ConclusionsIn general, application of false and stale seedbeds with planting 150-200 kg seed ha-1 is recommended.Keywords: False seedbed, Lodging, Protein content, Stale seedbed
-
برای بررسی تاثیر سطوح مختلف تنش خشکی بر برخی شاخصهای رشدی و بیوشیمیایی گیاه همیشه بهار در شرایط گلخانه و استفاده از سالیسیلیک اسید برای تعدیل اثرات تنش خشکی، آزمایشی بهصورت فاکتوریل در پایه طرح کاملا تصادفی با سه تکرار در گلخانه تحقیقاتی دانشکده کشاورزی بردسیر، دانشگاه شهید باهنر کرمان در سال 1393 اجرا شد. تیمارهای آزمایش شامل خشکی در چهار سطح (آبیاری مطلوب در حد ظرفیت مزرعهای و آبیاری در 75، 50 و 25 درصد ظرفیت مزرعهای) و سالیسیلیک اسید در چهار سطح (0، 5/0، 1، 5/1 و 2 میلیمولار) بود. نتایج نشان داد که سطوح آبیاری تاثیرمعناداریرا بر کلیه صفات مورد بررسی داشت. صفات وزن خشک،غلظت کارتنوئید، پرولین و قندهای محلول تحت تاثیرمعنادار تیمار سالیسیلیک اسید قرار گرفتند. برهمکنش آبیاری و سالیسیلیک اسید تاثیرمعناداری بر وزن خشک بوته، غلظت پرولین و قندهای محلول نشان داد. نتایج نشان داد که افزایش شدت تنش خشکی باعث کاهش معنادار شاخصهای رشد و همچنین غلظت کلروفیل a و b شد. غلظت کارتنوئید، قندهای محلول، پرولین و میزان فنل کل با کاهش آب آبیاری افزایش معناداری یافتند. افزایش سطوح سالیسیلیک اسید تا 5/1 میلیمولار باعث افزایش معنادار وزن خشک گیاه،غلظت کارتنوئید و قندهای محلول نسبت به شرایط عدم محلولپاشی شد. امادر غلظت 2 میلیمولار میزان این صفات نسبت به شاهد کاهش یافت. بهطورکلی، نتایج نشان داد که کاربرد سالیسلیک اسید بهویژه سطح 5/1 میلیمولار نقش مثبتی در تعدیل اثرات منفی تنش خشکی نشان داد.کلید واژگان: پرولین، فنل، قند، کارتنوئید، کلروفیلIn order to evaluate the effect of various levels of drought stress on some growth and bio-chemical parameters of marigold (Calendula officinalis L.) and application of salicylic acid for mitigating drought impacts under greenhouse conditions, an experiment was conducted with a factorial arrangement based on completely randomized design with three replications at Research Greenhouse of Agricultural Faculty of Bardsir, Shahid Bahonar University of Kerman in 2015. The experimental treatments were different levels of drought stress at four levels (irrigation for fulfill of 100%, 75%, 50% and 25% of the field capacity) and foliar-application of salicylic acidat at five levels (0, 0.5, 1, 1.5 and 2 mM). The results showed that the irrigation levels had significant effect on all studied traits. The traits of dry weight, carotenoid contents, proline contents and soluble sugars were significantly affected by the salicylic acid treatment. Interaction of the irrigation and salicylic acid had significant effect on dry weight, proline contents and soluble sugars. The results showed that increase in drought stress caused to significant decreasing in growth parameters and also chlorophyll a and b contents. Contents of carotenoid, soluble sugars, proline and phenol were significantly increased by decreasing amount of irrigation water. Increase of salicylic acid to 1.5 mM increased the plant dry weight, carotenoid contents and soluble sugars relative to the control conditions. 2 mM salicylic acid decreased the traits compared to non- foliar application. Generally, the results showed that application of salicylic acid specially in 1.5 mM had a positive role in mitigation of negative effects of drought stress.Keywords: Carotenoid, Chlorophyll, Proline, Phenol, Soluble sugar
-
سابقه و هدف
بیماری آلزایمراز مهمترین انواع دمانس مغزی در بین افراد مسن می باشدکه در آن قدرت شناخت و حافظه فرد تحت تاثیر قرار می گیرد.تاکنون درمان های متنوعی برای بهبودو کندکردن روند بیماری آلزایمر پیشنهاد شده است که اکثرا بر مبنای مهار آنزیم استیل کولین استراز در مغز بوده اند.مطابق با منابع طب سنتی، گیاه برگ بو دارای یک نقش مهم در تقویت ذهن و حافظه است. هدف مطالعه ی کنونی تعیین فعالیت مهارکنندگی استیل کولین استرازی روغن ثابت و روغن فرار میوه ی گیاه برگ بو بوده است.
مواد و روش هاتحقیق به روش تجربی انجام گرفت. میوه های گیاه برگ بو بعد از جمع آوری، خشک شده و با روش سوکسله و با استفاده از حلال n- هگزان عصاره گیری شدند. در نهایت به کمک روش Ellman فعالیت مهار کنندگی استیل کولین استراز روغن ثابت و فرار میوه گیاه برگ بو مورد بررسی قرار گرفت و درصد مهار مورد مقایسه و تحلیل قرار گرفت.
یافته هاروغن ثابت با غلظت mg.mL-1 1.35 آنزیم استیل کولین استراز را 2.4 ± 34.33 درصد مهار کرد و روغن فرار با غلظت μg.mL-1 1.8 آنزیم را به میزان 50 درصد مهار نمود.
بحث و نتیجه گیریبا توجه به نتایج حاصل از این تحقیق، یکی از شیوه های احتمالیتاثیر میوه گیاه برگ بو در تقویت ذهن و حافظه می تواندبه علت فعالیت مهارکنندگی استیل کولین استرازی اسانس و روغن ثابت میوه ی گیاه باشد.
کلید واژگان: بیماری آلزایمر، استیل کولین استراز، برگ بوBackground and
PurposeAlzheimer's disease (AD) is a neurodegenerative disorder which is an ordinary type of dementia in the elderly. It impairs memory and cognitive ability. Different kinds of treatment have been presented to cure AD or reduce its progression, most of which are based on inhibition of acetylcholinesterase enzyme. According to traditional Persian medicine, the bay laurel fruit has been applied for different medical purposes such as improving mind and memory function. The aim of the presented study was to evaluate the acetylcholinesterase inhibitory activity of fixed and essential oil of Laurus nobilis L. fruit.
Methods and Materials: Dried fruit of Laurus nobilis L. was subjected to hydro distillation for obtaining the essential oil, then the fixed oil of fruit was extracted by a Soxhlet apparatus (n-hexane as a solvent). Ellman method was employed to evaluate the acetylcholinesterase inhibitory activity of bay laurel fruit.ResultsBoth fixed and essential oil exhibited acetylcholinesterase inhibitory activity which the percentage of inhibition for fixed oil (1.35 mg.mL-1) and essential oil (1.8 μg.mL-1) was 34.33 ±2.4 and 50, respectively.
ConclusionAccording to the results obtained from the present study, the effect of bay laurel on mind and memory can be relevant to its acetylcholinesterase inhibitory activity.
-
Background and objectives
Stevia rebaudiana has been used in medicine as anti-inflammatory, antioxidant, antipyretic, anti-fungal, and antibacterial agent. The present study was conducted to investigate the healing effects of S. rebaudiana ethanol extracts on cutaneous wounds in rats.
MethodsFull-thickness excisional wounds (2×2 cm) were induced on the back of 32 rats. The rats were divided into four groups as follows; untreated (control) and treated with 1 mL basal cream, 1 mL S. rebaudiana ethanol extract 10%, and 1 mL tetracycline (3%) for 20 days (short term). Animals of each group were euthanized at 20 day post-injury and wounds were assessed through macroscopic and microscopic analyses.
ResultsDuring the experiment, S. rebaudiana indicated a significant reduction in the wound area compared to other groups. Parameters such as arrangement of the healing tissue, re-epithelilization and epithelial formation demonstrated considerable changes when compared to the control. In addition, treatment with S. rebaudiana decreased the total number of cells, fibrocytes/fibroblasts ratio, neutrophils, and lymphocytes and enhanced the number of blood vessels and fibroblasts at 20 day.
ConclusionThe present study demonstrated the wound healing activity of S. rebaudiana, lending credence to the folkloric use in the treatment of cutaneous wounds.
Keywords: ethanol extract, in vivo, Stevia rebaudiana, wound healing -
مقدمه
هیدروکربن های چندحلقه ای آروماتیک (PAHs) متعلق به گروهی از آلاینده های آلی پایدار (POPs)هستند که در محیط زیست نتیجهی احتراق ناقص مواد آلی، فوران آتش فشان ها و آتش سوزی جنگل ها و مزارع کشاورزی می باشند، اما عمده منبع تولید این آلودگی ها عامل انسانی است. این ترکیبات امروزه جزء نگرانی های اصلی در موضوع آلاینده ها بوده و می توانند به راحتی وارد سیستم های خشکی و آبی شوند. جذب مولکول های هیدروکربن های آروماتیک و پلی آروماتیک بر روی سطوح نانوتیوب های کربنی (CNTs) در طی سال های اخیر افزایش یافته است.
روش کاردراین مطالعه جذب فنانترن (به عنوان نماینده ای از گروه هیدروکربن های چندحلقه ای آروماتیک) برروی نانو تیوب کربنی چنددیواره در محیط آلی بررسی شد. تمام آزمایشات در محیط آزمایشگاه با دمای 2± 24 صورت گرفت. متغیرهای مختلف شامل نوع حلال، حجم حلال، pH محیط، زمان جذب و غلظت فنانترن بهینه و بیشترین راندمان جذب تحت عوامل بهینه سازی شده به دست آمد. نمونه ها با دستگاه HPLC آنالیز شد.
یافته هانتایج نشان دادکه متانول با حجم 10میلی لیتر، با زمان جذب 5/1 ساعت و غلظت ppm 3/1 بیشترین راندمان جذب را دارد. pH محیط تاثیری در راندمان جذب نشان نداد.
نتیجه گیرینانوتیوب های کربنی چنددیواره ظرفیت جذب بالایی برای جذب فنانترن دارند. در محیط آلی میزان جذب فنانترن برروی جاذب نانویی کربنی ازنوع چنددیواره بالاتر از 90% و باتوجه به ماده مصرفی دراین مطالعه 92% به دست آمد. تکرارپذیری روز به روز و درطول یک روز نتیجه فوق الذکر را تاییدکردند.
کلید واژگان: جذب، فنانترن، نانوتیوب های کربنی چنددیواره، HPLCIntroductionPolycyclic Aromatic Hydrocarbons (PAHs) belong to one of the groups of persistent organic pollutants (POPs) which are the result of incomplete combustion of organic materials, volcanic eruptions and forest and agricultural fields’ fires in the environment. However, human factors are main source of these pollutions. Nowadays, these compounds are among the main concerns related to the pollutants which, can easily enter into the land and water systems. Absorption of aromatic hydrocarbons and poly-aromatic molecules on the surfaces of carbon nano-tubes (CNTs) have increased in recent years. In this study, absorption of phenanthrene (as a representative of aromatic hydrocarbons groups) on multi-walled carbon nano-tubes was investigated in organic environment.
Material And MethodAll experiments were performed in a laboratory environment with a temperature of 24±2.Different variables including the type of solvent, solvent volume, pH of the environment, the absorption time of optimal phenanthrene concentration, and the highest removal efficiency under optimized parameters were obtained. Samples were analyzed using HPLC.
ResultFindings showed that methanol with the volume of 10 ml, and the absorption time of 1.5 hours and 1.3 ppm concentration had the maximum absorption efficiency. Environmental pH had no effect on the absorption efficiency.
ConclusionMulti-walled carbon nano-tubes have high absorption capacity for the absorption of phenanthrene. Moreover, in an organic environment, the level of phenanthrene absorption on multi-walled carbon nano-adsorbent was more than 90% and according to the material used was 92%. Day-to-day and within-day reproducibility confirmed the mentioned results.
Keywords: Absorption, Phenanthrene, Multi, walled carbon nano, tubes, HPLC -
استفاده از شتاب دهنده های الکترواستاتیک با انرژی متوسط در صنعت بسیار مورد توجه قرار گرفته است. دلیل این امر بازدهی بالا و قیمت مناسب این نوع شتاب دهنده ها سایر شتاب دهنده ها است. این مقاله، ابتدا کاربرد و اهمیت ساخت شتاب دهنده الکترواستاتیک با انرژی مطرح می گرددkeV 800در این مقاله، ابتدا کاربرد و اهمیت ساخت شتاب دهنده الکترواستاتیک با انرژی CST STUDIO SUITEدر ادامه طراحی و شبیه سازیجفت شدگی خازنی شتاب دهنده داینامیترون و همچنین شبیه سازی باریکه الکترونی به وسیله نرم افزار ارائه می شود.
کلید واژگان: شتاب دهنده الکترواستاتیک، جفت شدگی خازنی، لوله شتاب دهی، نرم افزار CST STUDIO SUITENowadays, middle energy electrostatic accelerators in industries are widely used due to their high efficiency and low cost compared with other types of accelerators. In this paper, the importance and applications of electrostatic accelerators with 800 keV energy are studied. Design and simulation of capacitive coupling of a dynamitron accelerator is proposed. Furthermore, accelerating tube are designed and simulated by means of CST Suit Studio.Keywords: electrostatic accelerator, capacitive coupling, accelerating tube, CST Studio Suite -
بهبود کارایی استفاده از منابع یکی از راهکارهای اساسی برای رسیدن به کشاورزی پایدار می باشد. استفاده از سیستم های کشت مخلوط با بهره گیری بهینه از منابع آب، نور و عناصر غذایی یکی از این راهکارها می باشد. به منظور ارزیابی جذب و کارایی مصرف نور در کشت مخلوط افزایشی ذرت و لوبیا، آزمایشی در سال زراعی 89-1388 در مزرعه تحقیقاتی دانشگاه زنجان به صورت طرح بلوک های کامل تصادفی اجرا شد. تیمارهای آزمایشی شامل نسبت های مختلف کشت مخلوط افزایشی ذرت و لوبیا (افزایش 20، 40، 60 و 80 درصد تراکم بهینه لوبیا در کشت خالص به تراکم بهینه ذرت) و هم چنین کشت خالص هر دو گونه بود. ماده خشک و سطح برگ هر دو گیاه در طول فصل رشد اندازه گیری شد. نتایج نشان داد که میزان جذب تشعشع توسط سایه انداز مخلوط ذرت- لوبیا در کلیه تیمارهای کشت مخلوط نسبت به کشت خالص ذرت و لوبیا بیشتر بود، زیرا در کشت مخلوط، سطح سایه انداز برای جذب تشعشع افزایش می یابد. نسبت برابری زمین برای جذب فعال فتوسنتزی در تمام تیمارهای کشت مخلوط بیشتر از یک بود که بیانگر سودمندی کشت مخلوط نسبت به تک کشتی از لحاظ جذب تشعشع می باشد. بیشتر بودن کارایی مصرف نور ذرت و لوبیا در سیستم کشت مخلوط در مقایسه با تک کشتی دو گونه نیز بیانگر استفاده بهینه از منبع نوری در کشت مخلوط بود. با توجه به کارایی مصرف نور در بین تیمارهای مختلف کشت مخلوط، کشت افزایشی 60% لوبیا به عنوان بهترین الگوی کشت مخلوط شناخته شد.
کلید واژگان: الگوی کاشت، تک کشتی، نسبت برابری زمینRadiation Absorption and Use Efficiency in Additive Intercropping of Maize and Bean in Zanjan RegionImprovement of resource use efficiency is a basic approach for sustainable agriculture. Applying intercropping systems, in which resources such as water, radiation and nutrients are used optimally, is one of these strategies. In order to evaluate radiation absorption and use efficiency in additive intercropping of maize-bean, an experiment was carried out in 2010, based on completely randomized blocks design with three replications, at Research Farm of Zanjan University. Treatments included different ratios of additive intercropping system (sowing 20, 40, 60 and 80% of common bean optimum density + optimum density of maize) and monoculture of these crops. Dry matter and leaf area of both crops were measured during the growth period. Results showed that the absorbed radiation by canopy of maize-bean intercropping in all treatments was higher than the monoculture of maize and bean, because the surface of canopy increases to absorb radiation. for intercropping system and result in more absorption of radiation compared to monoculture. The values of LERPAR were more than 1 in all intercropping treatments, which indicates the advantage of intercropping cultivation in comparison with monoculture system based on radiation absorption. Higher values of radiation use efficiency for maize and bean under intercropping system in comparison with monoculture of these crops confirmed the optimum use of radiation resource in intercropping system. Regarding the efficiency of radiation absorption by different intercropping treatments, the additive cultivation of 60% bean with 100% maize was identified as the best cropping pattern.
Keywords: Planting pattern, Monoculture, Land equivalent ratio.
- در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو میشود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشتههای مختلف باشد.
- همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته میتوانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
- در صورتی که میخواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.