به جمع مشترکان مگیران بپیوندید!

تنها با پرداخت 70 هزارتومان حق اشتراک سالانه به متن مقالات دسترسی داشته باشید و 100 مقاله را بدون هزینه دیگری دریافت کنید.

برای پرداخت حق اشتراک اگر عضو هستید وارد شوید در غیر این صورت حساب کاربری جدید ایجاد کنید

عضویت
فهرست مطالب نویسنده:

mohammadjavad varidi

  • مریم اکبری گورچین قلعه، محمدجواد وریدی*، مهدی وریدی، هانیه یاربی

    سس مایونز یکی از سس های پرطرفدار در جهان است که یک امولسیون نیمه جامد روغن در آب است که از مخلوط کردن روغن نباتی، زرده تخم مرغ، آب، سرکه و غیره تهیه می شود. به دلیل کالری و کلسترول بالای زرده تخم مرغ مصرف بیش از حد سس مایونز اغلب باعث مشکلات مرتبط با سلامتی می شود. مشکلات عمده ای که تولیدکنندگان سس مایونز با آن مواجه هستند شامل اکسیداسیون چربی در طول ذخیره سازی است که منجر به طعم بد محصول و همچنین کاهش ارزش غذایی و ایمنی مواد غذایی می شود. این عوامل ممکن است پذیرش مصرف کننده از سس مایونز را کاهش دهد. با افزایش تقاضای مصرف کنندگان برای غذاهای کم چرب و کم کلسترول، سس مایونز کم چرب پتانسیل مصرف بالایی دارد. لذا اصلاح فرمولاسیون این امولسیون پرچرب نیاز اساسی در صنعت غذا است. در این پژوهش امکان استفاده از ژل آلوئه ورا به عنوان جایگزین چربی در سس مایونز مورد مطالعه قرار گرفت. بدین منظور از طرح مخلوط بهینه برای سه متغیر مستقل روغن A 15-60%، ژلB  0-55% و آب  C0-10% استفاده شد. ترکیب چندگانه از این متغیرها منجر به یک طرح آزمایشی با 16 نمونه گردید که با استفاده از نرم افزار Design Expert تعیین شدند، و ویژگی های فیزیکوشیمیایی، رئولوژیکی و بافتی نمونه ها مورد بررسی قرار گرفتند. همچنین معادلات رگرسیونی مناسب و نمودار کانتور مخلوط به وسیله این نرم افزار برای هر پاسخ به دست آمد. نتایج نشان داد که افزایش درصد جایگزینی ژل آلوئه ورا وکاهش درصد روغن منجر به افزایش pH وکاهش اسیدیته، پایداری، خواص بافتی و شفافیت نمونه ها گردید. به منظور توصیف خواص رئولوژیکی از مدل بینگهام استفاده شد و بررسی پارامترهای ویسکوزیته و تنش تسلیم بینگهام با افزایش درصد جایگزینی ژل آلوئه ورا، روند کاهشی داشت. همچنین ویسکوزیته ظاهری نمونه ها سیر نزولی و رفتار رقیق شونده با برش نشان داد. این تغییرات در ویژگی ها، به دلیل تاثیر بسزای چربی در فرمولاسیون سس مایونز می باشد. براساس نتایج بدست آمده، مقادیر بهینه متغیرهای مستقل به ترتیب روغن (%40)، ژل آلوئه ورا (%30) و آب (%0) جهت تولید مایونز کم چرب بود. بهینه سازی فرمولاسیون براساس متغیرهای مستقل و پاسخ های بهینه یابی نشان داد که ژل آلوئه ورا به تنهایی در حد %30 قابلیت استفاده در سس مایونز را دارد. بنابراین، ژل آلوئه ورا قابلیت استفاده در سس مایونز به عنوان جایگزین بخشی از روغن را دارا می باشد.

    کلید واژگان: بهینه سازی، ژل آلوئه ورا، سس مایونز، کم چرب
    Maryam Akbari Govarchin Galeh, Mohammadjavad Varidi *, Mehdi Varidi, Hanieh Yarabbi
    Introduction

     Mayonnaise is one of the world’s most popular sauces. It is a semi-solid oil-in-water emulsion made by mixing vegetable oil, egg yolk, water, vinegar, and other ingredients. Due to the high calorie and cholesterol content of egg yolks, excessive consumption of mayonnaise can lead to health-related problems. Major issues faced by mayonnaise producers include fat oxidation during storage, which leads to off-flavor and taste, as well as reduction in nutritional value and food safety. These factors may negatively affect on the consumer acceptance of mayonnaise. With increasing consumer demand for low-fat and low-cholesterol foods, low-fat mayonnaise has significant consumption potential. One of the consumer demands is to reduce the fat content in mayonnaise and salad dressing. Fats play many functional roles in food emulsions, contributing to the taste, appearance, texture, and shelf life of the product in specific ways. Therefore, it is challenging to maintain the quality of traditional products when preparing low-fat foods. It is possible to select specific fat substitutes in particular amounts to create a product with a texture similar to traditional mayonnaise. Light mayonnaise often contains certain fats added to help stabilize the emulsion and thicken its consistency. This research studied the possibility of using aloe vera gel as partial fat substitute in mayonnaise.

    Materials and Methods

    All the powdered ingredients were mixed together with eggs, water, and half of the required amount of vinegar in a blender for 3 minutes. To form an emulsion, oil was added in two stages while stirring together with starch and gums for 5 minutes. Mixing oil and the aqueous phase simultaneously leads to the formation of a water-in-oil emulsion. Finally, the remaining vinegar was added and mixed for 3 minutes until the fat particles were evenly dispersed in the sauce. Aloe Vera gel was also added in proportion to the reduction of oil according to the formulation of the samples. The optimal mixture design was used for three independent variables: oil A 15-60%, gel B 0-55%, and water C 0-10%. The multiple combinations of these variables led to an experimental design with 16 samples that were determined using Design Expert software, and the physicochemical, rheological, and textural characteristics of the samples were investigated. Additionally, suitable regression equations and mixed contour diagrams were obtained by this software for each response.

    Results and Discussion

    The results showed that increasing the replacement percentage of aloe vera gel and decreasing the percentage of oil led to an increase in pH and a decrease in acidity, stability, textural properties, and transparency of the samples. To describe the rheological properties, Bingham's model was used, and the viscosity parameters and Bingham's yield stress were investigated with an increasing the percentage of aloe vera gel replacement. Additionally, the apparent viscosity of the samples exhibited a decreasing trend and thinning behavior with shear. These changes in characteristics are attributed to the effect of adding fat to the mayonnaise formulation. The optimal values of independent variables in the production of low-fat mayonnaise were oil (40%), aloe vera gel (30%) and water (0%), respectively.

    Conclusion

    This research showed that aloe vera gel can be used in the formulation of mayonnaise as apartial substitute to oil. Due to the strong demand from consumers for this product, reformulating this high-fat emulsion is a fundamental need in the food industry. The use of aloe vera gel offers many benefits, including reducing cholesterol and fat levels overall, increasing microbiological stability, and, in some cases, lowering manufacturing costs.

    Keywords: Aloe Vera Gel, Low Fat, Mayonnaise, Optimization
  • فاطمه شکرالهی، فخری شهیدی*، محمدجواد وریدی، آرش کوچکی، فرشاد صحبت زاده لنبر

    سورگوم گیاهی مقاوم به خشکی است که با توجه به محتوای بالای نشاسته، منبع مناسبی برای استخراج نشاسته می باشد. اما ویژگی های ضعیف عملکردی نشاسته سورگوم، استفاده از آن را محدود می سازد. استفاده از پلاسمای غیرحرارتی به عنوان روشی نوظهور، می تواند سبب بهبود خواص عملکردی نشاسته از جمله شفافیت، حلالیت و پایداری در برابر انجماد-ذوب شود. از این رو، در این پژوهش، اثر متغیرهای تیمار پلاسما شامل نوع گاز (هوا و آرگون) و زمان تیمار (1، 10 و 20 دقیقه) بر شفافیت، حلالیت (در دماهای 55، 65، 75 و 85 درجه سلسیوس)، تورم (در دماهای 55، 65، 75 و 85 درجه سلسیوس)، پایداری در برابر انجماد-ذوب (در 4 دوره متوالی) و سختی بافت ژل نشاسته سورگوم بررسی شد. نتایج نشان داد که پلاسمای هوا (در مقایسه با پلاسمای آرگون) و همچنین زمان های بیشتر تیمار (در مقایسه با زمان کم)، سبب بهبود شفافیت، حلالیت و پایداری در برابر انجماد-ذوب (در دوره دوم تا چهارم) شدند. مقدار شفافیت، حلالیت (در 85 درجه سلسیوس)، تورم (در 85 درجه سلسیوس) و پایداری در برابر انجماد-ذوب (در دوره چهارم) در نشاسته شاهد به ترتیب 02/14 درصد، 95/16 درصد، 66/20 گرم/گرم و 85/56 درصد بود که در نمونه هوا-20 دقیقه به 10/56 درصد، 02/70 درصد، 67/15 گرم/گرم و 06/49 درصد و در نمونه آرگون-20 دقیقه به 09/17 درصد،47/33 درصد، 24/23 گرم/گرم و 30/58 درصد رسید. کمترین و بیشترین مقدار سختی بافت به تریب مربوط به نمونه های هوا-20 دقیقه و آرگون 1-دقیقه بودند. احتمالا واکنش اصلی در پلاسمای هوا، اکسیداسیون و دپلیمریزاسیون بوده، اما در پلاسمای آرگون در زمان 1 دقیقه، اغلب اتصال عرضی رخ داده و پس از آن با افزایش زمان، اثر اکسیداسیون و دپلیمریزاسیون بر اتصال عرضی غالب گردیده است.

    کلید واژگان: پایداری به انجماد-ذوب، پلاسمای آرگون، حلالیت، شفافیت
    Fatemeh Shokrollahi, Fakhri Shahidi *, MohammadJavad Varidi, Arash Koocheki, Farshad Sohbatzadeh Lanbar
    Introduction

    Sorghum is a valuable source of starch for human use, being a drought-tolerant cereal grain that contains a large amount of starch (approximately 70%). However, native sorghum starch has limited application in the food industry due to its poor functional properties. Modification of sorghum starch would overcome its shortcomings and tailor it to the targeted application. Among physical methods, non-thermal plasma is a novel method for starch modifications. Plasma is an ionized gas including electrons, atoms, ions, radicals, and quanta of electromagnetic radiation that affects the functional properties of starch. The effect of plasma on starch is influenced by apparatus type, treatment conditions (feed gas, time, and power), and the source of starch. Two main mechanisms of starch modification are known as  cross-linking and oxidation together with depolymerization. Although the effect of plasma on many types of starch has been investigated, no research has yet been found on sorghum starch modification by non-thermal plasma. So, this investigation determines the effects of non-thermal plasma on sorghum starch to overcome the deficiency of the native form and to explore wider applications for sorghum starch.
     

    Materials and Methods

     Sorghum starch was extracted by alkaline steeping and purified using toluene-salt-water treatment. Dielectric Barrier Discharge (DBD) plasma was performed to modify sorghum starch. The applied DBD plasma setup consisted of two flat rectangular aluminum electrodes with the dimension of 6.5×45 cm and 7×18 cm and an electrode distance of 3 and 6 mm for air and argon plasma, respectively. Each of the electrodes was covered with a mica sheet as a dielectric barrier. DBD reactor was supplied with alternating current (AC). The frequency was adjusted to 375 Hz. Starch samples were treated for 1, 10, and 20 min at 23 kV at atmospheric pressure. The amylose content of sorghum starch was determined by iodine binding colorimetry. Evaluation of other chemical parameters including protein, lipid, ash, and moisture was carried out according to AAC methods. The clarity was determined using a spectrophotometer at 650 nm. The swelling and solubility of 1.5% sorghum starch suspension (at 55, 65, 75, and 85 °C) were measured using the centrifuge method. The centrifuge-filtration method was performed to evaluate freeze-thaw stability of sorghum starches up to 4 cycles.
     

    Results and Discussion

     Chemical parameters showed that the extracted sorghum starch was purified. The amount of protein, lipid, ash, and amylose was 0.39, 0.15, 0.59, and 29.23%, respectively. Plasma caused significant altering in sorghum starch properties. Compared to the argon plasma, the air plasma was more effective at increasing the clarity, solubility, and freeze-thaw stability. Increasing the time of treatment also improved the above-mentioned functional properties. The clarity of native starch (14.02%) was increased to 56.10% for the sample treated with air plasma for 20 min, probably due to intense oxidation and depolymerization of starch molecules. While the lowest clarity (13.07%) belonged to the 1-min argon plasma treated sample, this value was improved with increasing time of treatment. Probably cross-linked bonds were predominantly formed during the first minute of argon plasma treatment, resulting in a reduction of paste clarity, while a competitive depolymerization and oxidation reaction could be a reason for the increase of paste clarity. Solubility was increased for all treatments (except for argon-1 min). The highest solubility in each of the temperatures was found for 20 min air plasma treated sample. Depolymerization of starch molecules under plasma treatment produces low molecular weight fragments which leach out easily and increase solubility. The swelling power of 20 min air plasma treated starch was lower than that of native starch, probably due to the structural disintegration. Other samples had higher swelling power. The lower freeze-thaw stability of 1 and 10 min argon plasma treated samples may be due to cross-linking which increase retrogradation. The 20 min air-plasma treated sample had higher stability than other samples in 3 and 4th cycles of freeze-thawing. The freeze-thawing stability of other samples was similar to that of the native starch.
     

    Conclusion

     Non-thermal plasma treatment improved the functional properties of sorghum starch. The best results were detected for the sample treated with air plasma for 20 min. Cross-linking may be the main reaction in the first minute of argon-plasma treatment. However, this mechanism was suppressed in a longer treatment time. It may also be stated that the effect of oxidation along with depolymerization was predominant in air-plasma treatment.

    Keywords: Argon plasma, Clarity, Freeze-thaw stability, Solubility
  • سمیه بهفر، محمدجواد وریدی، ناصر همدمی*، مهدی وریدی
    زمینه مطالعاتی

    میدان الکتریکی ولتاژ بالا یکی از تکنولوژی های نوین بکار گرفته شده برای رفع انجماد مواد غذایی منجمد است.

    هدف

    هدف از این پژوهش بررسی اثر رفع انجماد گوشت گوسفند تحت میدان الکتریکی ولتاژ بالا بر سرعت فرایند و ویژگی های کیفی و میکروبی آن است.

    روش کار

    ابتدا گوشت گوسفند به قطعات مساوی (2×4×4 سانتی متر مکعب) برش داده شده و با استفاده از تونل انجماد در30- درجه سانتی گراد منجمد گردید. رفع انجماد قطعات گوشت منجمد تحت میدان الکترواستاتیک در سه ولتاژ انتخابی6/7، 9 و 35/10 کیلو ولت با فاصله الکترودی 5/4 سانتی متر انجام شد. نمونه کنترل در همان شرایط و بدون اعمال میدان الکتریکی رفع انجماد گردید. سرعت و زمان رفع انجماد در ولتاژهای اعمالی، طی فرایند و افت وزن نمونه ها، تغییر pH، رنگ و شمارش کلی میکروارگانیسم ها پس از فرایند رفع انجماد اندازه گیری شدند.

    نتایج

    بررسی نتایج آزمایشات در سطح احتمال 5 درصد نشان داد که با افزایش شدت میدان الکتریکی سرعت فرایند رفع انجماد افزایش یافته و بنابراین زمان موردنیاز کاهش می یابد. همچنین با اعمال میدان و افزایش شدت آن افت تبخیر تیمارها افزایش، افت رفع انجماد کاهش، افت پخت و افت وزن کلی آنها ابتدا افزایش و سپس کاهش نشان داد. تغییر ولتاژ اثر معنی داری بر pH و رنگ نمونه های گوشت نداشت ولی با افزایش شدت میدان الکتریکی شمارش کلی باکتری ها کاهش معناداری (p<0.05) را نشان داد.

    نتیجه گیری نهایی

    رفع انجماد تحت میدان الکتریکی ولتاژ بالا علاوه بر افزایش سرعت فرآیند منجر به بهبود ویژگی های کیفی و میکروبی گوشت گوسفند می-شود.

    کلید واژگان: رفع انجماد، شدت میدان، گوشت گوسفند، میدان الکتریکی
    Somayeh Behfar, Mohammad Javad Varidi, Naser Hamdami *, Mehdi Varidi
    Introduction

    Freezing and thawing are complex heat transfer processes and the chemical and physical changes that occur during these processes can affect the product quality (Li and Sun, 2002). During the thawing process, physicochemical changes and microorganism activities damage the food products (Bertola et al, 1994; Kalichevsky, Knorr, & Lillford, 1995). Several factors can affect the degree of quality loss, including the rate of thawing, temperature, and microorganisms (Jia et al, 2017). The rate and quality of the thawing process are the fundamental needs of the meat industry, and accordingly, many studies have investigated the thawing conditions to achieve the best quality of meat products (Jia et al, 2017). Modern thawing methods such as high pressure, microwave, ohmic, radiofrequency, ultrasonic, and high voltage electric field thawing can improve the thawing rate at the low temperature (Hsieh et al., 2010). In recent years, the use of high voltage electric fields (HVEF) has been considered due to low thermal damage, no chemical consumption, and being economical. In HVEF thawing, a strong electric field is used between point and plate electrodes in an environment of dielectric fluid to create a force, followed by a secondary motion in the fluid. The secondary flow of fluid name ionic wind, or corona wind, results from localized air ionization around the point electrode. By increasing the corona flow, the volume fluctuation and air velocity increase, which results in an increase in the heat transfer coefficient (Singh et al., 2012). In this case, the thin electrode is an electric discharge electrode and another electrode is a ground electrode. One of the advantages of using an electric field for thawing is the antimicrobial effect of this method. In addition, the electric field can affect oxygen molecules of air and generates free radicals of ozone molecules, which is a strong oxidizing agent with a high disinfection capacity that various studies reported the effect of ozone depletion on poultry meat (Yang and Chen, 1979; Jaksch et al., 2004). The present study was conducted to study the effect of HVEF thawing of mutton on the process rate and its qualitative and microbial properties. For this purpose, three different strengths of the electric fields were produced by varying the voltage at a constant electrode distance, and the HVEF thawing was compared with the conventional air thawing.

    Materials and Methods

    The fresh mutton meat was cut into cube pieces (4 × 4 × 3 cm3, 35 g) and after packing in polyethylene bags were frozen by a freezing tunnel at -30° C for 1 hour and stored at -18 ° C until analysis. The HVEF system was consists of a generator with adjustable voltages between -50 and 50 kV and a maximum output current of 5 mA (Ls50KV5mA, China), multiple needle and plate electrodes, and a wooden enclosure. The copper plate electrode was connected to the negative pole and the spot electrode connected to the positive pole of the high voltage power. The thawing process was performed at an electrode distance of 4.5 cm and 3 different voltages of 7.6, 9, and 10.3 kV at a temperature of 25 ˚C. The thawing process proceeded until the center of samples reached 0˚C and an optical fiber thermocouple (FOB 651A, Canada) was used to determine the end time of thawing. The evaporation, thawing, cooking and total losses were measured by weighting the frozen samples before and after thawing and cooking (Mousakhani- Ganjeh et al., 2015). The surface color, pH value and total microbial count of meat samples were measured after thawing.

    Results and discussions

    Thawing of frozen mutton was carried out at 3 voltages of 7.6, 9, and 10.35 kV, and at an electrode distance of 4.5 cm that is equal to the field strength of 1.7, 2.0, and 2.3 kV/cm. Thawing of the control sample was performed at the same condition without field application. Results showed that the thawing rate of the frozen samples significantly increased with increasing field strength so that the thawing time at the near-spark voltage in comparison with the control sample reduced 45%. Investigation of different losses of mutton samples thawed under different strengths of the electric field showed that the evaporation loss of the thawed samples under HVEF increased by arise the electric field strength, conversely, the thawing loss was reduced with increasing the electric field strength. The control sample had the lowest cooking loss and the thawed sample under the strength of 2.0 kV/cm had the highest cooking loss. As the results show, the pH value increased with increasing the strength of the electric field, but this increase was not statistically significant (p>0.05). Investigation of the color parameters of thawed samples showed a* index, as a particular index in the meat color, decreased and L* index increased with increasing the electric field strength. The results of microbial counts of thawed samples under different strengths of the electric field showed a significant decrease (P <0.05) in the total viable counts in thawed samples under HVEF compared to the control sample. Total microbial count of HVEF thawed samples under strengths of 1.7, 2.0, and 2.3 kV/cm decreased to 4.8, 4.69, and 4.5 log CFU/g, respectively.

    Conclusion

    This study investigated the HVEF thawing of frozen mutton in comparison with air thawing. The results showed that the HVEF thawing of frozen mutton improved the thawing rate and the evaporation, cooking and total loss of the conventional thawed sample was lower than the HVEF thawed samples while the thawing loss decreased by applying the electric field during the thawing process. In addition, HVEF thawing process reduced the total microbial count of thawed samples by the production of ozone and negative ions that this effect improved with increasing the electric field strength.

    Keywords: electric field, Electric field strength. Mutton, Thawing
  • شهره تاتاری، فخری شهیدی*، محمدجواد وریدی، الناز میلانی، محبت محبی

    با توجه به اهمیت غلات صبحانه در رژیم غذایی کنونی، این فراورده ها می توانند به عنوان حامل مواد مغذی مهم به کار روند. بنابراین هدف از این پژوهش، مطالعه تاثیر متغیر های اکستروژن شامل فرمولاسیون خوراک ورودی (نسبت آرد کامل جو دوسر- آرد کامل سنجد (90-10، 75-25 و 60-40 درصد)، رطوبت خوراک (14، 18 و 22 درصد) و سرعت چرخش مارپیچ (120، 150 و 180 دور در دقیقه) بر برخی ویژگی های فیزیکی و عملکردی غلات صبحانه بود. این ویژگی ها که شامل میزان رطوبت، دانسیته توده، سختی، اندیس حلالیت در آب و شاخص های رنگی محصول بودند توسط روش مرکب مرکزی چرخش پذیر مورد بررسی قرار گرفتند. بر اساس نتایج به دست آمده، افزایش آرد کامل سنجد و رطوبت خوراک باعث افزایش میزان رطوبت و سختی و کاهش زردی نمونه ها شد. در حالی که، اندیس حلالیت در آب در اثر افزایش آرد کامل سنجد افزایش و در اثر افزایش رطوبت خوراک کاهش یافت. نتایج ارزیابی سرعت چرخش مارپیچ نشان داد، افزایش سرعت باعث کاهش دانسیته توده، سختی و اندیس حلالیت در آب گردید. همچنین با افزایش تمامی متغیر های مورد بررسی، میزان روشنی نمونه ها کاهش یافت. از سویی، تفاوت بین محتوای اجزاء و ساختار آرد کامل سنجد و آرد کامل جو دوسر یکی از مهمترین عوامل تاثیر گذار بر نتایج به دست آمده بود. از سوی دیگر، اثر متغیر های رطوبت خوراک و سرعت چرخش مارپیچ، به عنوان فاکتور های بسیار مهم فرایند اکستروژن، بر تمامی خصوصیات فیزیکی و عملکردی محصول کاملا قابل تشخیص بود. مطابق نتایج بهینه یابی به منظور تولید فراورده حجیم با ویژگی مطلوب میزان رطوبت 26/10 درصد، دانسیته توده 11/0 گرم بر سانتی متر مکعب، سختی بافت 01/11 نیوتن، حلالیت در آب 66/12 درصد، روشنی رنگ 09/56، شرایط فرایند شامل نسبت آرد کامل سنجد به آرد کامل جو دوسر10:90، سرعت چرخش مارپیچ180 دور بر دقیقه و میزان رطوبت خوراک ورودی  22 درصد تعیین گردید.

    کلید واژگان: اکستروژن، جو دو سر، مرکب مرکزی چرخش پذیر، سنجد، ویژگی های فیزیکی
    Shohreh Tatari, Fakhri Shahidi*, MohammadJavad Varidi, Elnaz Milani, Mohebat Mohebbi

    With regard to the importance of breakfast cereal in today's eating habit, these products can serve as vehicles for the main nutrients. Therefore, the purpose of this research was to investigate the effect of extrusion variables containing replacement level of whole oat flour with whole oleaster flour (10, 25 and 40%), feed moisture (14, 18 and 22%) and screw speed (120, 150 and 180 rpm) on some physical and functional properties of breakfast cereal. These properties included moisture content, bulk density (BD), hardness (HD), water solubility index (WSI) and color parameters assessed by central composite rotatable design. Based on the obtained results, an increase of the whole oleaster flour and feed moisture increased the moisture content and hardness and decreased the yellowness of the samples. While the water solubility index was increased by increasing the whole oleaster flour and was decreased by increasing the feed moisture. The evaluation results of the screw speed indicated that increasing the speed resulted in less bulk density, hardness and water solubility index. Additionally, the lightness of samples decreased due to a higher amount of all the variables studied. On the one hand, the difference between ingredients content and structure of the whole oleaster flour and the whole oat flour was one of the most effective factors on the obtained results. On the other hand, the influence of the feed moisture and screw speed, as very important factors of the extrusion process, on the physical and functional properties of the product was completely recognized. Optimum condition was found to the blends of whole oleaster flour/whole oat flour (10:90), screw rate of 180 rpm, and feed moisture content of 22% with desirable properties including humidity(10.26%), bulk density (0.11 g/cm3), hardness (11.01 N), water solubility index (12.66 %), lightness (56.09).

    Keywords: Extrusion, Oat, Oleaster, Physical properties, Central composite rotatable
  • شهره تاتاری، فخری شهیدی، محمدجواد وریدی*، محبت محبی

    در سال های اخیر، تقاضا برای مصرف فراورده های سالم و مفید گسترش یافته است. با توجه به نقش ویژه غلات صبحانه ای در رژیم غذایی امروزی، استفاده از مواد مغذی در فرمولاسیون آن ها به عنوان راهی جهت تولید فراورده های غذایی فراسودمند در نظر گرفته می شود. بنابراین در این پژوهش، تاثیر فرمولاسیون خوراک ورودی (نسبت آرد کامل سنجد به آرد کامل جو دوسر (10 به 90، 25 به 75 و 40 به 60%)، رطوبت خوراک (14، 18 و 22%) و سرعت چرخش مارپیچ (120، 150 و rpm 180) بر برخی ویژگی های غلات صبحانه ای مورد بررسی قرار گرفت. بدین ترتیب که از روش مرکب مرکزی چرخش پذیر برای مطالعه شاخص جذب آب، فعالیت آب و ضریب انبساط استفاده شد. بر اساس نتایج به دست آمده، افزایش نسبت آرد کامل سنجد از 10 به 40% در شرایط ثابت سایر متغیرها (رطوبت 18% و سرعت مارپیچ rpm 150) باعث کاهش شاخص جذب آب (از 64/5 به 16/5) و ضریب انبساط (از 72/1 به 48/1) نمونه ها شد. در حالی که افزایش رطوبت خوراک از 14 به 18درصد، افزایش شاخص جذب آب (از 01/5 به 16/5) و فعالیت آب (از 33/0 به 63/0) را در سطح جایگزینی 25 درصد و سرعت مارپیچ rpm 150 به دنبال داشت. نتایج افزایش سرعت چرخش مارپیچ در رطوبت های 14 و 22 درصد به ترتیب باعث کاهش و افزایش شاخص جذب آب گردید. علاوه بر این، ارتباط بین ضریب انبساط و ریز ساختار نمونه ها توسط روش میکروسکوپ الکترونی روبشی اثبات شد. مطابق نتایج بهینه یابی به منظور تولید فراورده حجیم با ویژگی مطلوب میزان شاخص جذب آب  26/6 درصد،  فعالیت آب 64/0 ، ضریب انبساط 85/1 ، شرایط فرایند شامل نسبت آرد کامل سنجد به آرد کامل جو دوسر10:90، سرعت چرخش مارپیچ180 دور بر دقیقه و میزان رطوبت خوراک ورودی  22درصد تعیین گردید.

    کلید واژگان: غذای فراسودمند، سنجد، غلات صبحانه ای، اکستروژن، ریزساختار
    Shohreh Tatari, Fakhri Shahidi, Mohammad Javad Varidi*, Elnaz Mialni, Mohebat Mohebbi

    In recent years, the individuals' demand for consumption of healthy and useful products has increased. With regard to the specific role of breakfast cereal in today's dietary habit, the incorporation of nutrients into their formulation is considered as a way to produce functional food products. So in this research, the effect of extrusion variables containing feed formulation (whole oleaster flour to whole oat flour (10 to 90, 25 to 75 and 40 to 60%), feed moisture (14, 18 and 22%) and screw speed (120, 150 and 180 rpm) on some properties of snack was investigated. Thus, the central composite design was used to assess the water absorption index (WAI), water activity (aw), expansion ratio. Based on the obtained results, in a constant condition of other variables (feed moisture; 18% and screw speed; 150 rpm), an increase of the whole oleaster flour ratio from 10 to 40% decreased the WAI (from 5.64 to 5.16) and expansion ratio (from 1.72 to 1.48). While, an increase of the feed moisture from 14 to 18% led to an increase in the WAI (from 5.01 to 5.16) and water activity (from 0.33 to 0.63), when replacement level and screw speed were 25% and 150 rpm, respectively. The evaluation results of the screw speed in the moisture of 14 and 22% indicated that increasing the speed resulted in a decrease and increase in WAI, respectively. In addition, the relationship between the expansion ratio and microstructure was proved by scanning electron microscopy method. The optimum condition was found to the blends of whole oleaster flour/whole oat flour (10:90), screw rate of 180 rpm, and feed moisture content of 22% with desirable properties including (0.64%), expansion ratio(1.85), water absorption index(6.26).

    Keywords: Functional food, Oleaster, Breakfast cereal, Extrusion, Microstructure
  • محمد مالکی، فخری شهیدی*، محمدجواد وریدی، الهام آذرپژوه

    در این پژوهش ویژگی های فیزیکوشیمیایی برش های هویج اسمز شده، در طی مرحله خشک کردن تکمیلی با هوای داغ مورد بررسی قرار گرفت. نمونه های برش خورده هویج ابتدا تحت پیش تیمار اسمزی بهینه شده، قرار گرفتند، شرایط بهینه در مرحله ی آبگیری اسمزی، محلول چای ترش با غلظت 60 درصد ساکارز، مدت زمان 60 دقیقه و نسبت 20:1 در نظر گرفته شد. در مرحله خشک کردن هوای داغ، متغیر مستقل دماهای (60، 70 و 80 درجه سانتی گراد) و متغیرهای وابسته میزان رطوبت، چروکیدگی، میزان آبگیری مجدد، میزان ترکیبات فنلی، بافت و ارزیابی حسی بودند. اثر دما بر تمام پاسخ ها معنی دارد بود. با افزایش دما، میزان رطوبت کاهش و به 11/0 رسید. با افزایش دما، میزان چروکیدگی، آبگیری مجدد و بافت افزایش یافت. بیشترین میزان ترکیبات فنلی (ppm400) و ارزیابی حسی مربوط به دمای 70 درجه سانتی گراد بود. در پایان نقطه بهینه بر اساس حداکثر میزان آبگیری مجدد، حفظ بیشترین میزان ترکیبات فنلی و ویژگی های حسی، حداقل میزان رطوبت، چروکیدگی و سفتی بافت تعیین و دمای 70 درجه سانتی گراد انتخاب شد.

    کلید واژگان: اسمز، چای ترش، خشک کردن هوای داغ، هویج
    Mohammad Maleki, Fakhri Shahidi*, Mohammad Javad Varidi, Elham Azarpazhooh

    In this study, the changes in the color and some properties of carrot slices were investigated during hot air drying. The carrot slices first underwent an optimized osmotic pretreatment. The sucrose concentration of 60% and the dehydration time of 60 min were found to be as the optimum conditions of the osmotic dehydration. In hot air drying, temperature (60, 70 and 80°C) was taken into account as the independent variable and moisture content, shrinkage, rehydration ratio, total phenolic content, texture and sensory evaluation were considered as the dependent variables. The results revealed that the lowest reduction in total phenolic content was associated with 70°C and the effect of temperature on all of the responses was significant. With increasing temperature, shrinkage, rehydration ratio and texture increased but the moisture content decreased to (11 gr / gr). At the end, the optimum conditions were selected based on the maximum rehydration rate, phenolic compounds, total acceptance and minimum moisture content, shrinkage and stiffness of the texture were determined and the optimum temperature was 70 ° C.

    Keywords: Carrot, Hot Air Drying, Osmosis Roselle, Ultrasound
  • فاطمه حیدری، محبت محبی*، محمدجواد وریدی، مهدی وریدی

    تاثیر سطوح مختلف (5،10 و 15%) پودر پروتئین ماهی در فرمولاسیون خمیرآبه مورد بررسی قرار گرفت. به منظور دستیابی به مقدار بهینه پودر پروتئین ماهی، خصوصیات فیزیکوشیمیایی ناگت مرغ ارزیابی شدند. رفتار جریان خمیرآبه نشان داد که نمونه خمیرآبه شاهد و نیز نمونه حاوی 5/7 درصد ویسکوزیته بالاتری نسبت به دیگر نمونه ها داشتند. در هر دو روش سرخ کردن (سرخ کردن عمیق و هوا سرخ کن) افت رطوبت و جذب روغن در نمونه شاهد بالاتر از نمونه های حاوی پودر پروتئین ماهی بوده است. پوسته ضخیم تر که نتیجه مقدار بیشتر پودر پروتئین ماهی در خمیرآبه می باشد سبب جذب روغن کمتر طی سرخ کردن شده است. به علاوه، نمونه های حاوی پودر پروتئین ماهی امتیاز بالاتری از نظر بافت و پذیرش کلی کسب کرده است. علی رغم اینکه ناگت های حاوی پودر پروتئین ماهی اولویت های این تحقیق را برآورده کرده اند اما مقادیر حدود 15 درصد سبب ایجاد محدودیت هایی شدند و بر اساس بهینه یابی مطلوبیت مقادیر 8- 5/7 درصد پودر پروتئین ماهی در فرمولاسیون خمیرآبه به عنوان بهترین مقادیر تعیین شدند.

    کلید واژگان: ناگت مرغ، مطلوبیت، پودر پروتئین ماهی، سرخ کردن، کاهش جذب روغن
    Fatemeh Heydari, Mohebbat Mohebbi *, MohammadJavad Varidi, Mahdi Varidi

    The effect of various levels (5, 10 and 15%) of fish protein concentrate (FPC) in batter formulation was investigated. The physicochemical properties of chicken nugget were evaluated in order to find the optimium level of FPC in batter formulation. Flow behavior showed that the control batter and a treatment contains of 7.5% FPC had higher viscosity. Moisture loss and fat uptake in control sample was higher than all treatments contain FPC in both deep fat and air fryer. Thicker crust resulted by higher level of FPC in batter leads less oil uptake during frying. Moreover, the samples contain FPC had the highest score in terms of texture and overall acceptability. In spite the fact that nuggets contain FPC had the high rate of our research priorities, however, the level around 15% considered as a limitation. Using desirability optimization, the range between 7.5- 8% of PFC in batter formulation was selected as the best level.

    Keywords: Chicken nugget, desirability, Fat absorption reduction, FPC, Frying
  • بهاره سالمی، ناصر صداقت*، محمدجواد وریدی، سید محمود موسوی، فریده طباطبایی یزدی

    تنش های ناشی از زخمی شدن  بافت کاهوی برش خورده آماده مصرف معمولا منجر به افزایش سرعت تنفس  در آن می شود. عمر ماندگاری این محصول بستگی به مراحل فرآوری و بسته بندی، نوع فیلم بسته بندی و شرایط محیطی در طی زمان نگهداری دارد. هدف این پژوهش ارزیابی اثر دما و زمان نگهداری، تیمار پوششی و تعداد منافذ فیلم بسته بندی بر تردی بافت و ارزیابی حسی کاهوی برش خورده و بسته بندی شده در شرایط اتمسفر اصلاح شده و همچنین توسعه مدل سینتیکی عمر انبار مانی این محصول می باشد. به این منظور، 250 گرم کاهوی برش خورده شستشو شده و پس از پوشش دهی در دو غلظت متفاوت 5/1/5/0 و 5/1/1/0 درصد لاکتات کلسیم و سیستیین، در بسته هایی از جنس پلی اتیلن (با ضخامت 42 میکرومتر) و با تعداد منافذ 0، 20 و 40 در متر مربع با غلظت اولیه 21% اکسیژن، 0% دی اکسید کربن بسته بندی شدند. این پژوهش در دو دمای 5 و 10 درجه سانتی گراد و طی 12 روز انجام گرفت. شاخص های کیفی نظیر تردی بافت و ارزیابی حسی (پذیرش کلی) در طی این مدت مورد ارزیابی قرار گرفت. علاوه بر این، مدلی ریاضی برای توصیف سینتیک تغییرات تردی بافت و ارزیابی حسی نمونه ها توسعه داده شد و نهایتا زمان ماندگاری نمونه ها بر مبنای پذیرش کلی تخمین زده شد. نتایج نشان داد تغییرات پارامترهای تردی و ارزیابی حسی از معادله سینتیکی درجه صفر تبعیت می کند. نتایج پیش بینی عمر انبارمانی نمونه های  کاهوی برش خورده نشان داد نمونه های دارای پوشش حاوی 5/1% لاکتات کلسیم و 1/0% سیستیین، نگهداری شده در بسته های دارای 20 منفذ در دمای 5 و 10 درجه سانتی گراد و نمونه های دارای پوشش حاوی 5/1% لاکتات کلسیم و 5/0% سیستیین، نگهداری شده در بسته های دارای 20 منفذ در دمای 5 درجه سانتی گراد، به ترتیب عمر ماندگاری معادل 62/12، 59/12 و 59/11 روز را دارند (عدم تفاوت معنی دار در p < 0.05).

    کلید واژگان: مدلسازی سینتیکی، عمر ماندگاری، اتمسفر اصلاح شده، منفذ، کاهوی برش خورده رومین
    Bahareh Salemi, Nasser Sedaghat*, MohammadJavad Varidi, Seyed Mahmoud Mousavi, Farideh Tabatabaei Yazdi

    Mechanical injuries in to the tissue of ready-to-eat fresh-cut ​​lettuce usually cause stresses which leads to increasing respiration rate. The shelf life of this product depends on the processing and packaging steps, the type of packaging film and the environmental conditions during storage. The purpose of this study was to evaluate the effect of storage time, storage temperature, immersion pretreatment and the number of perforations of packing film on the crispness coefficient and sensory evaluation (total acceptance) of fresh-cut packaged lettuce stored under modified atmospheric condition and also development of shelf-life kinetic model of this product. For this purpose, 250 g of the lettuce strips were washed and immersed into two different concentrations (1.5/0.5 and 1.5/0.1) of CaL/Cys, then packed and sealed in low-density polyethylene packaging films (LDPE, 42 μm thickness) with no perforation (N-MAP: 21% O2, 0% CO2) and 20 and 40 perforations per m2, respectively. The study was carried out at two temperatures of 5 and 10 °C, for a storage time of 12 days. Indices of quality maintenance, i.e., crispness coefficient and sensory evaluation (total acceptance) were investigated. Furthermore, a mathematical model was developed to describe the kinetics of changes in crispness coefficient and sensory evaluation. Then, the shelf life of the samples was predicted based on sensory evaluation. The results showed that changes in selected targeted parameters could be best described by a zero-order. The prediction of shelf life of fresh-cut lettuce samples showed that samples treated with 1.5%CaL/0.1% Cys packed in 20-PM-MAP, stored at 5°C and 10 °C and samples treated with 1.5%CaL/0.5% Cys packed in 20-PM-MAP stored at 5°C, had a shelf life of 12.62, 12.59 and 11.59 days (with no significant difference at p < 0.05), respectively.

    Keywords: kinetic model, shelf-life, modified atmosphere packaging, Perforation, fresh-cut ‘Romaine’ lettuce
  • عاطفه سرادقی توپکانلو، فخری شهیدی*، علی جوادمنش، سید علی مرتضوی، محمدجواد وریدی، سحر روشنک

    در حال حاضر یکی از مشکلات مربوط به ماندگاری فراورده های گوشتی، ایجاد لکه زرد ناشی از آلودگی میکروبی در کالباس است. هدف از این پژوهش جداسازی عوامل میکروبی ایجاد کننده لکه زرد از کالباس توسط روش های مبتنی برکشت و مولکولی بوده است. بدین منظور از از نواحی لکه زرد 15 نمونه کالباس مرغ نمونه برداری و جداسازی انجام شد. در مجموع 44 پرگنه که روی محیط های  کشت ,[1] M17 MRS,[2] YGC [3] و PDB [4] رشد کرده بودند، به کالباس های برش خورده قبل از بسته بندی تلقیح و پس از بسته بندی و پدیدار شدن لکه زرد در 9 نمونه، جدایه های مورد نظر با روش مبتنی بر کشت و تعیین توالی دو طرفه ناحیه V3 ژن 16S rRNA و نیز ناحیه ITS4 ژن rRNA  18Sشناسایی شدند. نتایج حاصل از روش مبتنی بر کشت و مولکولی، نشان داد که عامل اصلی ایجاد کننده لکه زرد در کالباس مرغ بسته بندی شده تحت خلاء،   Enterococcus faecium، Enterococcus faecalis ، Streptococcus faecium و  Candida saitoanaبودند. علاوه بر آن یک گونه Enterococcus و یک گونهCandida  نیز در حد جنس شناسایی شدند. همچنین بررسی نمونه های دارای لکه زرد نشان داد که میکروارگانیسم های عامل لکه زرد، باعث تغییر pH ، شاخص های رنگی L* ، a* ، b*  و سینرسیس در مقایسه با نمونه شاهد می گردند، اما میزان تغییرات تنها در  میزان سینرسیس و a* معنی دار بوده است.

    کلید واژگان: جداسازی، شناسایی، لکه زرد، کالباس، تعیین توالی
    Atefeh Soradeghi Toopkanloo, Fakhri Shahidi*, Ali Javadmanesh, Seyed Ali Mortazavi, MohammadJavad Varidi, Sahar Roshanak

    One of the problems with the processed meat products shelf life is the formation of yellow spots in sausages. The aim of this study was to isolate and identify the microbial agents causing yellow stain from sausage by molecular- and culture-based methods. For this purpose, 15 samples from yellow spot and separation areas of chicken sausages were sampled. A total of 44 colonies grown on the MRS, M17, YGC, and PDB culture medium were inoculated into pre-packaged cutting sausages to induce the yellow spot. Yellow spots appearance9 samples and they were characterized by both culture-based methods and sequencing of a 350 bp fragment from 16S rRNA V3 region and a 800bp fragment from 18S rRNA ITS4 region. The results of the culture-based and molecular assay showed that the main causes of the yellow spots in the chicken sausage packaged under vacuum were Enterococcus faecium, Enterococcus faecalis, Streptococcus faecium and Candida saitoana. In addition, one species of Enterococcus and one species of Candida were also identified at the genus level. Examination of yellow spotted samples also showed that the microorganisms that cause yellow spotting cause changes in pH, color indices L*, a* and b*, and syneresis compared to the control sample but the rate of change is only in the syneresis quantity and a* was significant.

    Keywords: Isolation, Identification, Yellow spots, Sausage, Sequencing
  • آسیه قیافه شیرزادی، محمدجواد وریدی*، الناز میلانی

    میان وعده ها به بخش قابل توجهی از رژیم غذایی بسیاری از افراد به ویژه کودکان تبدیل شده اند. همچنین اسنک ها به دلیل تنوع و رنگ های جذاب، ماندگاری بالا و هزینه نسبتا کم طرفداران بسیاری دارند. عمده آن ها از غلات تولید می شوند و مشکل اصلی این میان وعده ها، مواد مغذی ناکافی بوده که  اثر منفی بر سلامتی داشته و باعث افزایش میزان چاقی در افراد، به ویژه کودکان می گردد. با بهره گیری از شبه غله کینوا در محصولات اسنک، باعث ایجاد تنوع در محصولات فعلی شده و همچنین موجب افزایش ارزش غذایی اسنک می گردد. از طرفی امروزه توجه به کاربرد مجدد فراورده های جنبی صنایع غذایی و فرعی نهاده های کشاورزی بیشتر شده است و برگرداندن این محصولات به چرخه تولید باعث افرایش ارزش افزوده می گردد. یکی از این فراورده های جنبی، گندم سن زده می باشد که به دلیل اسیب شبکه گلوتنی مورد استفاده در صنایع پخت نمی باشد و به مصرف خوراک دام می رسد. در این پژوهش اثر متغیرهای مستقل شامل میزان سطوح افزودن کینوا (0،25،50%)، میزان رطوبت (12،15،18 درصد)، سرعت چرخش مارپیچ (200، 120،160 دور در دقیقه) در قالب طرح مرکب مرکزی بود. تاثیر متغیرهای مستقل بر برخی خصوصیات فیزیکی و عملکردی فراورده شامل نسبت انبساط، سختی بافت، شاخص جذب آب، شاخص حلالیت آب، ارزیابی حسی موردبررسی قرار گرفت. نتایج نشان داد که با افزایش کینوا تا 50 درصد، سختی بافت (11/57-4/72 نیوتن)، شاخص حلالیت در آب (28/4-21) و پذیرش کلی محصول اکسترود شده، افزایش پیدا کرد و همچنین باعث کاهش نسبت انبساط (2/86-3/77)، شاخص جذب آب (5/05-5/39) و پذیرش حسی بافت، گردید. نتایج ارزیابی حسی مشخص کرد که شرایط رطوبت 12% و سرعت چرخش 175rpm و سطوح افزودن کینوا (19%)، برای تولید میان وعده مناسب بوده و بیشترین پذیرش کلی را دارد.

    کلید واژگان: میان وعده حجیم شده، کینوا، گندم سن زده، ویژگی عملکردی، اکستروژن
    Asiyeh Ghiafeh Shirzadi, MohammadJavad Varidi*, Elnaz Milani

    Snacks have become a significant part of the diet of many people, especially children. These snacks have many fans due to their attractive objects and colors, high durability and relatively low cost. Most of them are made from cereals, and the main problem with these snacks is insufficient nutrients, which have a negative effect on health and increase obesity in people, especially children. Using quinoa grain in products, it creates diversity in current products and also increases the nutritional value of snack. On the other hand, today, attention has been paid to the re-use of by-product in the food industry and the rate of agriculture inputs, and returning these products to the production cycle will increase the value added. One of these by-product is suni bug damaged wheat, which is used not used in the cooking industry due to the damage of the gluten network and is consumed by livestock feed. In this study, the effect of the independent variables included the percentage of addition of quinoa (0.25%, 50%), moisture content (12, 15, 18%), the screw speed (120,160,200 rpm) was in the form of a central composite design. The influence of the independent variables on some physical and functional properties was investigated, including expansion ratio, hardness, water absorption index, water solubility index, sensory evaluation. The results showed that with increasing quinoa up t0 50%, increased the hardness (4.72-11.57N), water solubility index (21-28.4) and overall acceptability of the extruded product, and also decreased the ratio of expansion (3.77-2.86), water absorption index (5.39-5.05) and sensory acceptability of the texture. Sensory evaluation results showed that 12% humidity conditions, 175rpm screw speed and quinoa addition levels (19%) in the suni- bug wheat were suitable for snack production and had the highest overall acceptability.

    Keywords: Extruded Snacks, Quinoa, Suni -Bug wheat, Functional Properties, Extrusion
  • فاطمه ژانداری، فخری شهیدی*، محمدجواد وریدی، فریده طباطبایی یزدی، محمدرضا عدالتیان دوم، سحر روشنک

    تخمیر، از قدیمی ترین روش های فراوری و نگهداری مواد غذایی بوده و براساس فعالیت زیستی میکروارگانیسم ها در جهت بهبود ویژگی های حسی، ارگانولپتیکی و تغذیه ای مواد غذایی و تولید متابولیت هایی با قابلیت ممانعت کنندگی از رشد فلور میکروبی نامطلوب در مواد غذایی، صورت می گیرد. در نتیجه فراورده های تخمیری معمولا دارای زمان ماندگاری بالاتری نسبت به مواد خام بوده و اثرات مثبتی بر سلامتی دارند. در این پژوهش اثر افزودن زنجبیل در سطوح 4 و 8 درصد و آب ماست به میزان صفر و 3 درصد بر ویژگی های شیمیایی، میکروبی و حسی هویج تخمیری طی زمان های صفر، 4، 8، 16، 24 و 32 روز مورد بررسی قرار گرفت. نتایج نشان داد با افزودن 4 درصد زنجبیل، pH، شمارش کپک و مخمر و شاخص L* کاهش؛ اما میزان اسیدیته، شمارش کلی، شمارش باکتری های اسیدلاکتیک، شاخص های رنگی a* و b* و پذیرش کلی افزایش یافت. در مقابل، افزودن 8 درصد زنجبیل تاثیر منفی بر شاخص های مورد بررسی داشت و سبب کاهش پذیرش کلی و شمارش باکتری های اسیدلاکتیک شد. افزودن آب ماست در سطح 3 درصد، منجر به کاهش pH، شمارش کپک و مخمر و شاخص L*  و افزایش اسیدیته، شمارش کلی، شاخص های رنگی a* و b* و پذیرش کلی شد. در نمونه ی فاقد آب ماست و زنجبیل از ابتدا تا انتهای دوره ی نگهداری، به طور پیوسته میزان pH، شمارش کلی و شمارش کپک و مخمر افزایش و میزان اسیدیته و پذیرش کلی کاهش یافت. در حالی که در نمونه های حاوی زنجبیل و آب ماست، با افزایش زمان تخمیر تا روز شانزدهم میزان pH و شمارش کپک و مخمر کاهش و شمارش کلی، باکتری های اسیدلاکتیک، اسیدیته و پذیرش کلی افزایش یافت. با توجه به نتایج این پژوهش، استفاده از 4 درصد زنجبیل، 3 درصد آب ماست و زمان تخمیر شانزده روز برای افزایش زمان ماندگاری و تعداد باکتری های اسیدلاکتیک و بهبود ویژگی های حسی هویج تخمیری، توصیه می گردد.

    کلید واژگان: هویج، تخمیر، زنجبیل، آب ماست، زمان ماندگاری
    Fatemeh Zhandari, Fakhri Shahidi*, Mohammad Javad Varidi, Farideh Tabatabaei Yazdi, Mohammad Reze Edalatian Dovom, Sahar Roshanak

    Fermentation is one of the oldest techniques in food preservation, this process is defined as the biological activity of microorganisms to improve sensory, organoleptic and nutritional properties and produce a range of metabolites that inhibit the growth of unwanted microbial flora. As a result, fermented products have a shelf life substantially higher than raw materials and also have very beneficial effects on health. In this research, ginger in 4 and 8 % levels  and yogurt whey in 0 and 3 % levels, were added to the carrots and evaluated during of 0,4, 8, 16, 24 and 32 days of fermentation. The results showed that by adding 4% ginger, pH, mold and yeast count and L* index decreased, acidity, total count, lactic acid count, a* and b* color indexes and overall acceptance increased. In contrast, the addition of 8% ginger had a negative effect on the studied parameters and decreased the overall acceptance and enumeration of lactic acid bacteria. Addition of yogurt (3%) decreased pH, mold and yeast count and L* index, but increased acidity, total count also color indices a* and b* and overall acceptance. In the non-yogurt and non-ginger sample from the beginning to the end of the storage period, pH, total count and mold and yeast counts increased steadily, and overall acidity and acceptance decreased. Whereas in the samples containing ginger and yogurt, the pH and count of mold and yeast decreased as the fermentation time increased to the 16th day and overall count increased, lactic acid bacteria, acidity and total acceptance. According to the results of this study, using 4% ginger, 3% yogurt and 16 days fermentation time to increase shelf life and lactic acid bacteria and improve the sensory characteristics of fermented carrots.

    Keywords: Carrots, Fermentation, Ginger, Yogurt Whey, Shelf life
  • مریم اکبریان، فخری شهیدی*، محمد جواد وریدی، آرش کوچکی، سحر روشنک
    زعفران گران ترین محصول کشاورزی جهان می باشد و ایران بزرگترین تولیدکننده زعفران در جهان است، آلوده شدن زعفران در مراحل مختلف فرایند تولید، علاوه بر کاهش کیفیت منجر به کاهش اعتبار در بازار جهانی و صادرات می شود. لذا انتخاب یک روش مناسب جهت غیرفعال سازی فلور میکروبی زعفران ضرورت دارد. در بین روش های مختلفی که برای غیرفعال کردن میکروب ها استفاده می شوند، پلاسمای سرد به علت وجود مزایای بالقوه بی شمار از قبیل طبیعت غیرسمی، هزینه های عملیاتی پایین، کاهش قابل توجه مصرف آب طی فرایند های ضد عفونی، و امکان کاربرد آن برای محصولات غذایی متنوع، توجه زیادی را به خود جلب کرده است. پلاسما حالتی از گاز یونیزه شده شامل یون ها، الکترون، اشعه ماورابنفش و گونه های واکنش مانند رادیکال ها، اتم ها و مولکول های بر انگیخته است که قادر به غیرفعال سازی میکروارگانیسم ها می باشد. در این پژوهش پلاسمای سرد با استفاده از دو نوع گاز شامل نیتروژن و هوا تولید و اثر تابش پلاسما در مدت زمان های صفر، 3، 6، 9 و 12 دقیقه بر ویژگی های شیمیایی و میکروبی (باکتری اشرشیاکلی، انتروکوکوس فکالیس، کپک و مخمر) زعفران بررسی گردید. نتایج حاصل از این پژوهش نشان داد اثر میکروب کشی پلاسمای نیتروژن نسبت به پلاسما هوا کمتر بوده و با افزایش زمان تابش پلاسما میزان غیرفعال سازی میکروارگانیسم ها افزایش یافت. حداکثر کاهش بار میکروبی در زمان 12 دقیقه در ولتاژ 18 کیلوولت مشاهده شد و جمعیت باکتری اشرشیاکلی، انتروکوکوس فکالیس، کپک و مخمر به ترتیب به میزان 2/69، 2/48، 1/95 سیکل لگاریتمی کاهش یافت. نتایج همچنین نشان داد که افزایش زمان تابش پلاسما، میزان کروسین، پیکروکروسین و سافرانال را به طور معنی دار (0/50˂p)  کاهش داد. میزان کاهش کروسین، سافرانال و پیکروکروسین در زمان 12 دقیقه به ترتیب 6/01، 4/04، 5/44 درصد بود.
    کلید واژگان: آلودگی میکروبی زعفران، پلاسمای سرد، پیکروکروسین، سافرانال، کروسین
    Maryam Akbarian, Fakhri Shahidi *, Mohammad Javad Varidi, Arash Koocheki, Sahar Roshanak
    Saffron is the most expensive agricultural product in the world and Iran is the largest saffron producer in the world. Saffron contamination in different stages of the production process, in addition to quality loss leads to reducing credit in the global market and exporting. Therefore, it is necessary to select an appropriate method for inactivation the microbial flora of saffron. Among the common methods that used to inactivation the microorganisms, cold plasma is due to the potential benefits such as non-toxic nature, low operational costs, and a significant reduction in water consumption during decontamination, and the possibility of its use for a variety of food products has attracted much attention. Plasma is a state of ionizing gas, including ions, electrons, ultraviolet rays, and reactive species such as radicals, atoms and molecules that can ignite, which can inactivate microorganisms. in this research, cold plasma was produced using two types of gas including nitrogen and air, and the effect of plasma radiation at 0, 3, 6, 9 and 12 minutes on the chemical and microbial (Escherichia coli, Enterococcus faecalis, Mold and Yeast) properties of saffron were investigated. The results of this study showed that germicidal effect of nitrogen plasma was lower than air plasma and the plasma exposure time had a significant effect on reduction of microbial load and by increasing the time of plasma exposure, the inactivation of microorganisms increased. The maximum microbial reduction was observed in 12 minutes. Maximum reduction in microbial load was observed at 12 minutes and 18 kilovolt voltage, which reduced the population of Escherichia coli, Enterococcus faecalis, mold and yeast by 2/69, 2/48, 1/95 log cycle respectively, However, with increasing radiation time, the amount of crocin, picocrocin and safranal decreased (p˂0.05). Reduction of crocin, safranal and picocrocin in 12 minutes was 6/01, 4/04, 5/44%, respectively.
    Keywords: Microbial contamination of saffron, cold plasma, picocrocin, Safranal, Crocin
  • وحیده سالارکریمی، محمد جواد وریدی*، مهدی وریدی
    در این پژوهش، تاثیر جایگزینی آرد بلوط بر ویژگی های فیزیکوشیمیایی و حسی همبرگر (30 درصد گوشت) موردبررسی قرار گرفت. سطوح آرد بلوط صفر، 3، 6 و 9 درصد بود که جایگزین آرد سوخاری موجود در فرمولاسیون شد. آرد بلوط تمامی ویژگی های پخت تیمارها شامل کاهش قطر، افزایش ضخامت، افت پخت، چروکیدگی و ظرفیت حفظ چربی و نیز شاخص های بافت به جزء چسبندگی را به طور معنی داری (0/05<P) بهبود بخشید. پارامترهای رنگ *L و *b نمونه های تیمارشده به طور معنی داری (0/05<P) بالاتر از نمونه شاهد بود. درحالی که شاخص *a آنها کمتر به دست آمد. در ارزیابی حسی نمونه ها، همه تیمارهای آرد بلوط از لحاظ طعم، بافت، آبداربودن و پذیرش کلی امتیاز بالاتری در مقایسه با نمونه شاهد کسب کردند. اما از لحاظ شاخص رنگ، نمونه شاهد مطلوب تر بود. براساس نتایج به دست آمده، با جایگزینی آرد بلوط در فرمولاسیون همبرگر، می توان تا حد قابل قبولی ویژگی های فیزیکوشیمیایی و حسی این فراورده را بهبود بخشید.
    کلید واژگان: آرد بلوط، ارزیابی حسی، فیزیکوشیمیایی، همبرگر
    Vahideh Salarkarimi, Mohammad Javad Varidi *, Mehdi Varidi
    In this study, the effect of chestnut flour substitution on the physicochemical and sensory properties of burger (30% meat) was investigated. Chestnut flour levels were 0, 3, 6 and 9% that were replaced with toasted flour in the formulation. Chestnut flour improved all the treatments cooking characteristics significantly (P<0.05) including diameter reduction, thickness increase, cooking loss, shrinkage and fat retention capacity and also texture indices except adhesiveness. The color parameters of L* and b* of the treated sample were significantly (P<0.05) higher than control sample whereas its a* was lower. In samples sensory analysis, all of chestnut flour treatments got higher scores compared to control sample in terms of flavor, texture, juiciness and overall accepting. But the control sample was more favorable in terms of color index. According to the obtained results, with chestnut flour replacement in the formulation of burgers, physicochemical and sensory characteristics of this product can improve acceptably.
    Keywords: Burger, Chestnut flour, Physicochemical properties, Sensory Evaluation
  • مهسان ایرجی فر، محمد جواد وریدی *، مهدی وریدی، یونس زاهدی
    در این تحقیق اثر ماریناد اسید لاکتیک ( در چهار غلظت صفر، 5/0، 1 و 5/1 درصد) وکلرید سدیم (2 درصد) طی زمان های غوطه وری صفر، 24، 48 و 72 بر ویژگی های بافتی، حسی و الگوی پروتئولیز عضله دو سر ران (Biceps femoris) شتر یک کوهانه بررسی شد. طول سارکومر، شاخص تجزیه میوفیبریل، نیروی برشی وارنر- براتزلر، میزان کلاژن، آنالیز حسی و الگوی پروتئولیز پروتئین های میوفیبریلی با استفاده ازSDS-PAGE مورد بررسی قرار گرفت. نتایج نشان داد با افزایش غلظت اسید و زمان نگهداری نمونه ها، میزان نیروی برشی و کلاژن کاهش پیدا کرد درحالی که شاخص تجزیه میوفیبریل و طول سارکومر افزایش یافت. همچنین نتایج حاصل از SDS-PAGE نشان داد که اثر زمان بر مساحت باند (به عنوان شاخصی از پروتئولیز) زنجیره سنگین میوزین معنی دار نبود (05/0<p). درحالی که غلظت اسید اثر افزایشی معنی داری بر مساحت زنجیره سنگین داشت (05/0>p). در رابطه با پروتئین های c،α -اکتینین و اکتین هم غلظت و هم زمان اثر معنی دار و افزایشی در مساحت داشتند (05/0>p)، اما بر سایر باندها اثر معنی داری گزارش نشد (05/0<p). ارزیابی حسی نیز حاکی از تاثیر معنی دار ماریناد بر تردی و پذیرش کلی گوشت بود، به طوری که غلظت 5/1 درصد اسید بیشترین پذیرش و تردی را نشان داد (05/0>p). نتایج حاصل از این مطالعه نشان داد که ماریناد اسید لاکتیک می تواند به عنوان یک روش موثر بر ویژگی های بافتی و پروتئولیز عضله دوسر ران شتر به کار رود.
    کلید واژگان: اسید لاکتیک، ویژگی های بافتی، شتر، عضله دوسر ران
    Mahsan Irajifar, Mohammad Javad Varidi *, Mahdi Varidi, Younes Zahedi
    Introduction
    Camel carcasses has lower fat content in comparison with cow, moreover, camel meat has relatively higher polyunsaturated fatty acids and lower cholesterol contents (Kadim et al., 2009a & 2006). However, calcium amount of camel meat is greater than that of cow, and its lower consumption is partly related to this issue. With increasing demand of camel meat, more attention has been paid to the quality and chemical composition of it. Acid marinade can be used through the diffusion of the solution and its propagation over time as an extensive method to improve the meat tenderness (Yusop et al., 2010). Lactic acid is often used in the meat industry as an antimicrobial during carcass slaughter. In addition, lactic acid can improve meat tenderness (Hinkle et al., 2010). The aim of the present study was to determine the influence of lactic acid and sodium chloride on textural and sensory properties, also and proteolysis pattern of biceps femoris muscle of camel.
    Materials and Methods
    Six 4 to 7 years old camels were transported to the slaughterhouse in Mashhad (Iran). Slaughtering and dressing of camels were carried out according to Islamic methods. All chemicals and reagents in the experiments were of analytical grade and purchased from Merck and Sigma-Aldrich companies. Biceps femoris muscle was used as an experimental material, cutting into 2×2×5 cm3 pieces, and laid in lactic acid solutions (0, 0.5, 1, and 1.5% v/v, all accompanied with 2% w/v NaCl) at a ratio of 1 to 4 (meat to marination solution) within plastic bags. Marination process was carried out for 0, 24, 48, 72 h at 4 °C. The meats were then removed from the marinade and dried lightly. After that, moisture, ash, protein and fat contents of the meat were specified by AOAC (2002). Shear force was measured by TA.XT plus texture analyzer (Stable Micro Systems, UK) provided with a Warner-Bratzler shear force blade method in order to evaluation of meat tenderness (Byrne et al., 2000). Myofibrillar fragmentation index (MFI) was determined as described by zahedi et al. (1393). Sarcomere length was measured with the method of Botha et al. (2007). One-dimensional gel electrophoresis was determined as described by zahedi et al. (1393). Collagen content was specified by AOAC (1993). Sensory properties including color, texture, flavor, juiciness and overall acceptance were performed using a 5-point structured hedonic scale (Hoffman et al., 2006 & 2008). One-way analysis of variance (ANOVA) was used to determine the significant differences between treatments using SPSS software (version 19). Duncan’s multiple range test was used to compare the means.
    Results and discussion
    Acid concentration and marination time had a significant effect (p <0.05) on sarcomere length. It was likely due to the fact that the addition of acid led to increase in pure positive charges on myofibrils and cytoskeletal proteins. As a result, more repulsive forces were generated between the protein molecules of myofibrils. Eventually, myofibrils swelling caused distancing Z lines from one another, and increasing the sarcomere length (Ke et al., 2008). The results of analysis of variance showed that the concentration of lactic acid had a significant effect on MFI (p<0.05), and MFI value was less than zero at 0% concentration, however, it was non-significant in relation to the time (p> 0.05). The higher MFI values of the marinated samples may be due to the proteolysis of myofibrile proteins using D-cathepsins which activated at acidic pH (range 3-6). Meat samples marinated in the highest concentration for 72 h showed the lowest WBSF (p<0.05). The tenderising mechanism of acid marinades was believed to be including weakening of structures due to swelling of meat, increasing proteolysis by cathepsins, and conversion of collagen to gelatin at low pH during cooking (Berge et al., 2001; Offer & Knight, 1988). The retention time and acid concentration did not have a significant effect (p> 0.05) on the collagen amount of lactic acid treated samples. It was likely that low acid concentration, although affecting some of the parameters, is not suitable for degradation of connective tissue (Hinkle et al., 2010). Sensory analysis showed that tenderness of the samples marinated at with 1.5% acid received the highest score (p<0.05), which was consistent with the instrumental results. Acid concentration significantly affected (p<0.05) total acceptance of the samples. Higher levels of acid can be used for marinating without adversely affecting the consumer acceptance. Results from SDS-PAGE showed that number of seven bands on gels, on average, were belonged to intact proteins, and other bands were considered as peptides which resulted from proteins proteolysis, especially heavy proteins. Also, time had non-significant effect on band area of myosin heavy chain (p>0.05), while, acid concentration had a significant effect on the area of ​​this protein (p<0.05). The band area of proteins C, α-actinin and actin proteins enhanced as a function of acid concentration and marination time (p<0.05).
    In conclusion, we can claim that lactic acid and sodium chloride can be used as an effective acidic marination to improve biceps femoris muscle of camel meat. This method can be advice as a trick for tenderizing camel meat in household consumptions, restaurants and also meat industry, thereby increasing demand for camel meat in order to gain further healthy benefits of it.
    Keywords: Lactic acid, biceps femoris, Camel
  • شکیبا کیانیانی، محمد جواد وریدی *، مهدی وریدی
    چربی منبعی از انرژی مورد نیاز بدن و ویتامین های محلول در آن بوده و برکیفیت و ویژگی های تکنولوژیک محصول نهایی مانند بافت و عطر و طعم موثر است. اما به دلیل اثرات زیانبار چربی بر سلامتی، امروزه محصولات کم چرب مورد استقبال تولید کنندگان و مصرف کنندگان قرار گرفته است. کاهش چربی سبب افت کیفیت فرآورده های گوشتی می گردد. برای جبران این افت کیفیت می توان از افزودنی هایی نظیر ژل آلوئه ورا استفاده کرد. در این پژوهش ژل آلوئه ورا جایگزین صفر، 50 و 100 درصد چربی حیوانی و روغن گیاهی در فرمولاسیون سوسیس آلمانی شد و خصوصیات فیزیکوشیمیایی، میزان انرژی، رنگ، بافت و خصوصیات حسی نمونه های سوسیس اندازه گیری گردید. بر اساس نتایج حاصله با جایگزینی ژل تفاوت معناداری در میزان خاکستر، پروتئین و pH نمونه ها ایجاد نشد (05/0<p). کاهش چربی و افزودن ژل آلوئه ورا افزایش بسیار معناداری را در میزان رطوبت و کربوهیدرات نمونه ها ایجاد کرد. همچنین مقدار چربی و انرژی فرآورده را کاهش داد (01/0≥p). شاخص زردی نمونه ها با کاهش میزان چربی کاهش یافت (01/0≥p). اثر جایگزینی چربی بر مقدار روشنایی نمونه ها معنادار بود (01/0≥p) و با کاهش چربی حیوانی فرمولاسیون، مقدار روشنایی افزایش یافت، اما با کاهش مقدار روغن گیاهی میزان روشنایی کم شد. جایگزینی چربی با ژل آلوئه ورا بر مقدار قرمزی نمونه ها اثر معناداری نداشت (05/0<p). کاهش چربی، سفتی، قابلیت جویدن، حالت صمغی و چسبندگی را کاهش داد (05/0>p)، اما بر میزان کشسانی و پیوستگی نمونه ها اثرمعنی داری نداشت (05/0<p). از نظر ارزیاب های حسی نمونه فاقد چربی حیوانی بیشترین پذیرش کلی را دارا بود.
    کلید واژگان: جایگزین چربی، ژل آلوئه ورا، سوسیس، فرآورده های کم چرب
    Shakiba Kianiani, Mohammad Javad Varidi *, Mehdi Varidi
    Introduction
    Meat and meat products contribute about 20% to human fat consumption. Fat is the main source of energy and the base of fat soluble vitamins. Besides, it improves cooking yield and water holding capacity, conserves taste and flavor of products and affects the emulsion stability, juiciness, costumer acceptability and structural and rheological properties of meat products. But Animal fat contains a relatively high amount of saturated fatty acids and cholesterol, which can increase the risk of cardiovascular disease, diabetes, cancer types and obesity. Thus, the meat industry is interested in merchandising fat-reduced meat products without neglecting the positive effects of fat on flavor and texture.
    Various researches have shown that the substitution of fat on a polysaccharides base such as fibers, starch, gums, and gels have improved and modified the texture, residual moisture and freeze stability, and decreased the price of the products.
    Aloe vera leaf gel contains about 99 – 99.5 % water and 1 - 0.5 % of the total solid content. On dry matter basis aloe vera gel consists of 55% polysaccharides, 17 % sugar, 16 % mineral, 7% protein, 4% lipids and 1% phenolic compounds (Lawless et al., 2014). The most important carbohydrates of aloe vera gel are the long chain polysaccharides, comprising glucose and mannose, known as the glucomannans [β (1, 4) – linked acetylated mannan]. All the solid content of aloe vera gel are surrounded by polysaccharide mucilage layer.
    Literature review pointed out there have been little investigations into the functionality of aloe vera gel in the emulsion meat products. According to the importance of producing low - fat meat products from one hand as well as the nutritional values and health characteristics of aloe vera gel on the other hand, this study was designed to replace the fat with aloe vera gel in the production of low - fat German sausage.
    Material and Methods
    Sausage samples containing 40% of red meat (German sausage) were produced based on the conventional plants formula. animal fat and vegetable oil replaced by 0, 50 and 100% aloe vera gel in the German sausage formulation. All samples were cooked at 90°C temperature to achieve the core temperature of 70° C, followed by cooling, they were kept in the refrigerator (4°C) until the subsequent experiments. The AOAC (2000) methods were used for measuring the moisture content, the amount of fat, ash and protein. The amount of carbohydrate was calculated based on the calculation of the total weight difference from the sum of ash, protein, fat and moisture (according to the method FAO / WHO). The amount of energy was computed based on the total amount of energy from fats, proteins and carbohydrates. To measure the pH of samples by pH meter, method of choe et al (2013) was followed. The color analysis was done on the surface of sausage cuts by chromometer. The parameters of color include L* (lightness), a* (redness) and b* (yellowness) were measured. Texture parameters include hardness(N), cohesiveness, springiness (cm), gumminess (N), chewiness (N.cm), adhesiveness were determined by texture analyzer as described by Bourne (1978). The sensory attributes were evaluated by 10 trained panelists. A five-point hedonic scale rating (1= very bad, 2=bad, 3= neither bad nor good, 4= good, 5= very good) was carried out.
    Results and Discussion
    Physicochemical properties analysis indicated significant differences among meat products (p ≤.0.01). The addition of aloe vera gel resulted a decrease in fat percentage and amount of energy, an increase in moisture and carbohydrate, but the amount of pH, protein and ash content did not change. This study showed that reducing the fat content and replacing by aloe vera gel caused a significant difference in the amount of energy (p≤.0.01).With respect to the significant contribution of fat in the production of energy, the amount of energy was reduced as expected by reducing the fat of the formulation. The results indicated that the value of L * showed the negative and positive trends with animal fat and vegetable oil changes, respectively (p≤.0.01). b* decreased by reducing the amount of fat and oil (p≤0.01), but the value of a* always remained constant (p˃0.05). The presence of aloe vera gel in sausage caused a reduction in hardness, adhesiveness and gumminess (p<0.05), while it did not affect the amount of adhesiveness and cohesiveness of samples (p˃0.05).
    The substitution of fat with aloe vera gel had a significant effect on the sensory characteristics of German sausage (p≤.0.01). By reducing fat and oil and adding aloe gel to the German sausage formulation, color acceptance score was decreased. In terms of panelists, the blank sample had the best color and the fifth sample color had the lowest score. Juiciness of the samples was increased by increasing the amount of gel. The results also showed that the fifth sample received the maximum score of juiciness. Sausages smell acceptance negatively changed by reducing the fat content and adding aloe vera gel. Third and fourth treatments got the highest texture score. Also, the third sample had the highest scores for taste and general acceptance. Chewiness analyzing showed that by increasing the amount of fat replacement the rate of this factor decreased. as well as the maximum rate of chewiness was related to the blank sample.
    Keywords: Fat replacement, Aloe Vera gel, Sausage, Low fat products
  • فاطمه حیدری، محمد جواد وریدی، مهدی وریدی، محبت محبی
    در این تحقیق، گوشت شتر در نسبت های مختلف (صفر، 25، 50، 75 و 100) جایگزین گوشت گاو موجود در فرمولاسیون برگر شد. تجزیه و تحلیل مولفه اصلی (PCA) برای درک هر چه بیشتر شباهت ها و تفاوت ها میان متغیرهای کیفی ارزیابی شده در 35 نمونه برگر انجام شده است. منحنی امتیاز، تحلیل مولفه های اصلی را برای مجموعه داده های حاصل از اندازه گیری متغیرهای شیمیائی برای 35 نمونه (نمونه کنترل، نمونه های حاوی 25، 50، 75 و 100) نشان می دهد. در مجموع، 6 مولفه اصلی حاصل گردید که مولفه اصلی اول (PC1)، دوم (PC2) و سوم (PC3) در مجموع 8/65% از کل واریانس داده ها را پوشش دادند. مولفه اصلی اول امکان جداسازی درجه روشنایی و زردی نمونه پخته، چروکیدگی، خاصیت ارتجاعی و ویژگی های حسی (طعم، بافت، آبداری، رنگ و پذیرش کلی) را دارد. مولفه اصلی دوم توسط دیگر ویژگی های بافتی و مولفه اصلی سوم توسط درجه قرمزی نمونه پخته و چربی مشخص شده اند. امکان تشخیص چه متغیرهای شاخص و در جداسازی کدام گروه ها وجود داشت، اشاره شود. بررسی منحنی امتیاز نشان می دهد که برگرهای پخته حاوی میزان بالاتر گوشت شتر ( 50، 75 و 100)، میزان رطوبت و چربی بیشتر و امتیاز طعم، بافت، آبداری و پذیرش کلی بالاتر می باشند.
    کلید واژگان: برگر شتر، تحلیل مولفه اصلی، پذیرش کلی
    Fatemeh Heydari, Mohammad Javad Varidi, Mahdi Varidi, Mohebbat Mohebbi
    In the present study the cow meat was replaced with camel meat (0, 25, 50, 75 and 100%) in burger formulation. Principal component analysis (PCA) was performed to understand quality variables differences and similarities of thirty-five sample burgers. Score plot, represents Principal component analysis of datasets derived from evaluated variables of thirty-five samples (samples contain of 0, 25, 50, 75 and 100% camel meat). Overall, six principal component was obtained which 65.8% of the total variance was concentrated into three first PCs. Cooked L*, cooked b* shrinkage, springiness, flavor, texture, juiciness, color and overall acceptability were the variables which separated by the first PC. The PC2 is characterized by the rest of instrumental texture parameters and the third by cooked a* and fat. The evaluation of score plot shows burgers contain higher amount of camel meat (50, 75 and 100%) had the higher moisture and fat content after cooking, higher scores in flavor, texture, juiciness and overall acceptability.
    Keywords: Camel meat burger, Principal component analysis, Overall acceptability
  • الناز قبادی، مهدی وریدی *، محمد جواد وریدی، آرش کوچکی
    پژوهش حاضر با استفاده از روش سطح پاسخ برای تعیین شرایط بهینه استخراج صمغ دانه شنبلیله با هدف دستیابی به حداکثر راندمان استخراج، ویسکوزیته، کربوهیدرات کل و حداقل پروتئین انجام شد. طرح آماری مرکب مرکزی با سه متغیر مستقل شامل دمای استخراج (75-25 درجه سانتی گراد) ، زمان استخراج (4-1 ساعت) و نسبت آب به دانه (60-20 میلی لیتر بر گرم) برای مطالعه متغیرها مورد استفاده قرار گرفت. نتایج آنالیز واریانس نشان داد که مدل چند جمله ای درجه دوم مناسب ترین مدل برای تفسیر رفتار هر چهار پاسخ بود. آنالیز آماری داده ها نشان داد که راندمان استخراج به طور معنی دار )05/0 (p با استفاده از روش بهینه سازی عددی شرایط بهینه استخراج صمغ دانه شنبلیله به صورت دمای استخراج 71/60 درجه سانتی گراد، زمان استخراج 33/3 ساعت و نسبت آب به دانه 6/44 میلی لیتر بر گرم تعیین گردید. در شرایط بهینه، مقادیر راندمان استخراج، ویسکوزیته، کربوهیدرات کل و پروتئین به ترتیب 18/21 درصد، 06/29میلی پاسکال ثانیه، 98/70 درصد و 19/4 درصد به دست آمد. همچنین فعالیت ضد اکسایشی صمغ استخراج شده در نقطه بهینه توسط روش های قدرت مهار کنندگی رادیکال آزاد DPPH، قدرت احیا کنندگی یون آهن سه ظرفیتی و قدرت مهار کنندگی رادیکال هیدروکسیل مورد ارزیابی قرار گرفت. در مجموع نتایج نشان داد صمغ دانه شنبلیله دارای ویژگی ضد اکسایشی قابل توجه و وابسته به غلظت است. در غلظت یک میلی گرم بر میلی لیتر قدرت مهار کنندگی رادیکال آزاد DPPH 23/43 درصد، قدرت احیا کنندگی یون آهن سه ظرفیتی 76/650 میکرومولار و قدرت مهار کنندگی رادیکال هیدروکسیل 95/46 درصد به دست آمد که به ترتیب معادل 50، 67 و 50/53 درصد قدرت ضد اکسایشی اسید آسکوربیک بود.
    کلید واژگان: بهینه سازی استخراج، دانه شنبلیله، صمغ، ضد اکسایشی
    Elnaz Ghobadi, Mehdi Varidi *, Mohammad Javad Varidi, Arash Koocheki
    In the present study, optimization of fenugreek gum extraction for maximum values of yield, viscosity, total carbohydrate and minimum value of protein was done using response surface methodology. A central composite design with three independent variables including extraction temperature (25-75 ℃), extraction time (1-4 hr), and water to seed ratio (20-60 ml/g) was used to study the behaviour of variables. ANOVA results showed that second-order polynomial model was the best for interpretation of responses' behaviour. Statistical analysis revealed that all the variables significantly (p0.05). Applying numerical optimization method, optimum extraction conditions were found to be extraction temperature of 60.71 °C, extraction time of 3.33 hr, and water to seed ratio of 44.6 ml/g. At the optimum point, extraction yield, viscosity, total carbohydrate and protein content were evaluated to be 21.18 %, 29.06 m Pa.s, 70.98%, and 4.19%, respectively. Furthermore, the antioxidant activity of the extracted gum at optimum point was evaluated by determining DPPH radical scavenging activity, Ferric reducing antioxidant power (FRAP) and hydroxyl radical scavenging activity. All the above antioxidant evaluation indicated that fenugreek gum exhibited reasonable antioxidant activity in a concentration dependent manner. The fenugreek gum showed 43.23% DPPH radical scavenging activity, 650.76 μΜ FRAP and 46.95 hydroxyl radical scavenging activity at concentration of 1 mg/ml which were 50, 67 and 53.50% of ascorbic acid, respectively.
    Keywords: Extraction optimization, Fenugreek seed, Gum, Antioxidant
  • بهنام فیوضی *، محمد جواد وریدی، الناز میلانی، فخری شهیدی، محمدحسین حداد خداپرست
    در این تحقیق، از رویه سطح پاسخ جهت بهینه سازی شرایط اکستروژن استفاده شد. متغیرهای مستقل فرایند شامل آرد کنجاله بنه (PDBC) که به طور جزئی چربی گیری شده است، PDBC (10-30 درصد)، میزان رطوبت (18- 12 درصد)، دمای اکستروژن (180-120 درجه سانتی گراد) و سرعت چرخش ماردون اکسترودر (220- 120 دور در دقیقه) بود. تاثیر متغیرهای مستقل بر برخی خصوصیات فیزیکی و عملکردی مورد بررسی قرارگرفت، که شامل چگالی توده، نسبت انبساط، سختی بافت، شاخص جذب آب، شاخص حلالیت در آب و شاخص جذب چربی بودند. نتایج نشان داد که افزایش PDBC خصوصیات فیزیکی و عملکردی اسنک حجیم شده را بهبود بخشید. چگالی توده با افزایش PDBC به طور قابل ملاحظه ای افزایش یافت. جایگزینی بخشی از آرد ذرت توسط PDBC سبب افزایش مقدار فیبر گردیده و میانگین اندازه سلول های هوایی کاهش یافت و حفره ها در دیواره سلولی ایجاد شدند. به علاوه، با افزایش میزان PDBC سختی بافت نیز افزایش یافت. با افزودن PDBC شاخص جذب آب و شاخص انحلال در آب به ترتیب کاهش و افزایش یافتند. شاخص جذب روغن نیز با افزایش PDBC و دمای اکسترودر افزایش یافت. از بین متغیرهای مستقل مورد مطالعه، PDBC معنی دارترین تاثیر را بر تمامی پاسخ ها در سطح اطمینان 95 درصد داشت. شرایط بهینه برای تولید اسنک حاوی PDBC شامل میزان رطوبت 17/45 درصد، PDBC 21/14 درصد، سرعت چرخش ماردون 160 دور در دقیقه و درجه حرارت 133/2 درجه سانتی گراد بود.
    کلید واژگان: اکستروژن، بافت سنجی، چگالی توده، خصوصیات عملکردی، نسبت انبساط
    Behnam Fiuzy, Mohammad Javad Varidi, Elnaz Milani, Fakhri Shahidi, Mohammad Hossein Haddad Khodaparast
    In this study, response surface methodology (RSM) was used to optimize extrusion conditions, including semi-defatted Bene cake (PDBC) content(10-30%), moisture content (12-18%), temperature (120-180 °C), and screw speed (120-220 rpm). The effects of the independent variables were investigated on some physical and functional properties including bulk density(BD), expansion rate, hardness, water absorption index (WAI),water solubility index (WSI), oil absorption index (OAI). Our result revealed that the addition of PDBC improved the functional and physical properties of extruded Bene snack (EBS).BD was remarkably increased by increasing PDBC. The addition of PDBC to cornmeal increased the fiber content contrary to the starch content. It also brought about a reduction in the average size of the cells and creation of holes on the cell wall. Hardness was also increased by adding PDBC. WAI of EBS was remarkably decreased by adding PDBC. WSI of EBS increased as PDBC increased. OAI of EBS increased by increasing PDBC and extrusion temperature. Among the independent variables, bene content had the largest effect on all of the responses. 21.14% PDBC, 17.45% moisture content, 160 rpm screw speed and 133.2 °C were found to be the optimal conditions for PDBC production.
    Keywords: Bulk Density, Expansion Ratio, Extrusion, Functional Properties, Texture Analysis
  • نسترن اکبرزاده، محمد جواد وریدی *، فخری شهیدی، الناز میلانی
    خلر، ماده اولیه سرشار از پروتئین می باشد که موارد استفاده آن در برنامه غذایی کم است. این گیاه در مقایسه با شبدر، یونجه، اسپرس و سایر گیاهان علوفه ای ارزش غذایی یکسانی داشته و پروتئین آن با توجه به مرحله رشد در هنگام برداشت بین 12 تا 22 درصد متغیر می باشد. با استفاده از فرایند پخت اکستروژن می توان تغییرات زیادی در ویژگی های خلر ایجاد نمود و آن را به صورت مستقل یا جایگزین در فرمولاسیون های مختلف به کار برد. در این پژوهش با استفاده از روش سطح پاسخ و نرم افزار Design expert اثر متغیر های اکستروژن شامل میزان رطوبت ورودی( 20-12 درصد )، دما ( 160-120 درجه سانتی گراد ) و سرعت چرخش مارپیچ ( 180-120 دور در دقیقه ) بر برخی خصوصیات فراورده اکسترود شده ( سختی، تخلخل و آزمون حسی ) و آرد حاصل از آن ( رنگ و جذب روغن )مورد ارزیابی قرار گرفت. با افزایش میزان رطوبت سختی افزایش ولی تخلخل، میزان روشنایی، میزان زردی و قرمزی، جذب روغن و پذیرش کلی کاهش یافت. با افزایش دما میزان قرمزی و جذب روغن افزایش و میزان سختی، زردی و پذیرش حسی کاهش نشان داد. با افزایش سرعت مارپیچ میزان قرمزی، جذب روغن، پذیرش کلی افزایش و میزان سختی و زردی کاهش یافت. شرایط فرآیند به منظور تولید محصولی با تخلخل، بافت، رنگ، جذب روغن و پذیرش کلی مناسب شامل رطوبت 12 درصد، دمای 137 درجه سانتی گراد و سرعت چرخش مارپیچ 137دور در دقیقه می باشد. در این شرایط مناسب ترین تخلخل، سختی، رنگ، بیشترین میزان پذیرش کلی و کمترین میزان جذب روغن را خواهیم داشت.
    کلید واژگان: اکستروژن، حسی، خلر، جذب روغن، تخلخل، رنگ
    Nastaran Akbarzade, Mohammad Javad Varidi*, Fakhri Shahidi, Elnaz Milani
    Grass pea is rich protein whereas it not consumed widely. Grass pea has same nutritional value with Clover, Alfalfa, Sainfoin and other forage plants which it has 12-22% protein. Extrusion cooking changes properties of Grass pea. Therefore, extruded Grass pea could use independently or as alternative in various formulations. The objective of this study was to apply response surface methodology by Design expert software to estimate the physicochemical and sensory properties of grass pea extrudate and to evaluate of the extrusion process include feed moisture (12-20%), die temperature (120-160°C) and screw speed (120-180 rpm) on properties of extruded Grass pea ( porosity, hardness, sensory properties) and its flour ( color, oil absorbtion index) were evaluated. By increasing feed moisture hardness increased and porosity, lightness (L*), yellowness (b*), redness (a*), oil absorption index and overall acceptability of extruded Grass pea decreased. Increasing die temperature increased redness, oil absorption index of extruded Grass pea whereas hardness, yellowness and overall acceptability of extruded Green pea decreased. Increasing screw speed increased redness, oil absorption index and overall acceptability of extruded Grass pea whereas hardness and yellowness decreased. Process conditions to produce best porosity, texture, color, oil absorption and overall acceptability were 12% moisture content, 137 ° C temperature and 137 rpm screw speed. In this condition, the best porosity, hardness, color, highest and lowest amounts of oil absorption will be obtain.
    Keywords: extrusion, Sensory, Khollar, oil absorption, Porosity, color
  • فرشته سبزی، محمد جواد وریدی، مهدی وریدی
    این پژوهش به منظور بررسی تاثیر غلظت آبغوره بر ویژگی های فیزیکوشیمیایی و بافتی عضله بایسپس فموریس گاو و با هدف بهبود تردی و افزایش بازارپسندی آن انجام شد. بدین منظور، آبغوره با درصدهای صفر، 30، 70 و 100 درصد به همراه کلرید سدیم 2 درصد (w/w)، به تکه های گوشت با ابعاد 3×15×15 سانتی مترمکعب (به مقدار 10 درصد وزن اولیه آن) تزریق گردید. سپس به منظور یکنواختی توزیع محلول در قسمت های سطحی و عمقی گوشت، نمونه ها در محلول آبغوره (با همان غلظت تزریق شده به آنها و با نسبت 1:4) قرار داده شدند و به مدت 12 ساعت در دمای 4 درجه سانتی گراد نگهداری گردیدند. نتایج نشان داد با افزایش غلظت آبغوره، میزان pH به طور معنی دار کاهش یافت (P<0/05). همچنین نگهداری در محلول آبغوره باعث افزایش معنی دار درصد جذب محلول، افت پخت و میزان WHC گردید (P<0/05). پارامترهای رنگی *L و *b نمونه های تیمارشده به طور معنی داری بیشتر از نمونه شاهد و مقدار *a آنها کمتر از نمونه شاهد به دست آمد (P<0/05) و نمونه های نگه داشته شده در آبغوره 100 درصد به مدت 12 ساعت دارای بالاترین شاخص تخریب میوفیبریل (MFI) و طول سارکومر و نیز کمترین مقدار نیروی برشی وارنر براتزلر (WBSF) بودند. بنابراین نتیجه گرفته شد که محلول آبغوره می تواند به عنوان جایگزینی برای ترد کننده های شیمیایی مورد استفاده در صنعت گوشت بدون تاثیر منفی بر دیگر پارامترهای کیفی آن استفاده گردد.
    کلید واژگان: آبغوره، تردکردن، خصوصیات بافتی، عضله بایسپس فموریس گاو
    Fereshteh Sabzi, Mohammad Javad Varidi, Mehdi Varidi
    This study was performed in order to examine the effect of verjuice concentration on the physicochemical and textural properties of beef Biceps femoris, which aimed at improving its tenderness and enhancing its marketability. To that end, verjuice (0, 30, 70 and 100%) and sodium chloride (2% w/w) were injected into the beef pieces with dimensions of 3×15×15 cm3 (10% of each piece initial weight). Then, for the uniform distribution of the solution on the surface and deep parts of the beef, the samples were immersed in verjuice solution (with the same concentration as was injected and at a ratio of 4:1) and stored at 4 °C for 12 h. The results showed that as verjuice concentration increased, pH decreased significantly (P
    Keywords: Beef Biceps Femoris, Tenderization, Textural Properties, Verjuice
  • نعیمه کاظمی طاسکوه، محمدحسین حدادخداپرست، محمد جواد وریدی، فریده طباطبایی یزدی
    در این پژوهش، تاثیر استفاده از آب ازن دار در غلظت های (2/0، 5/0 و 1) پی پی ام در 3 سطح زمانی (5، 10 و 15) دقیقه و همچنین ترکیب آب ازن دار در غلظت های (2/0، 5/0 و 1) پی پی ام و اسید لاکتیک 1% در زمان ثابت 10 دقیقه روی کاهش باکتری اشریشیاکلی (به عنوان یک باکتری گرم منفی شاخص آلودگی لاشه)، استافیلوکوکوس اورئوس ( به عنوان یک باکتری گرم مثبت شاخص آلودگی و مولد توکسین) و شمارش کلی میکرو ارگانیسم ها، در دمای مشابه سردکن آبی (4-0) درجه سانتی گراد، موردبررسی قرار گرفت و نمونه ها بلافاصله از لحاظ آزمایش های میکروبیولوژیکی موردبررسی قرار گرفتند، نتایج نشان داد که در تمامی سطوح اختلاف معنی داری (05/0>P) بین نمونه های شاهد و نمونه های تیمار دیده وجود داشت، علاوه براین اثر ترکیبی ازن و اسید لاکتیک نسبت به ازن در حالت جداگانه، تاثیر بیشتری بر کاهش باکتری اشریشیاکلی، استافیلوکوکوس اورئوس و شمارش کلی میکروارگانیسم ها داشت، بنابراین استفاده از ازن با غلظت 1 پی پی ام به صورت جداگانه و ترکیب با اسیدلاکتیک 1% می تواند در بخش سردکن آبی لاشه مرغ در کشتارگاه مورد استفاده قرار گیرد.
    کلید واژگان: ازن، استافیلوکوکوس اورئوس، اسیدلاکتیک، اشریشیاکلی، لاشه مرغ
    Naeimeh Kazemi Taskooh, Mohammad Hosein Haddad Khodaparast, Mohammad Javad Varidi, Farideh Tabatabaii Yazdi
    This study evaluated the effects of ozonated water (0.2, 0.5, and 1 ppm) alone with different exposure times (5, 10, and 15 min) and combinations of ozonated water (0.2, 0.5, and 1 ppm) with 1% Lactic acid during 10 min exposure for control of Escherichia coli (As a Gram-Negative food infection bacteria), Staphylococcus aureus (As a Gram-Positive food infection and toxigenic bacteria) and total count of poultry carcass, at the same temperature condition of chiller water (0-4 C) and samples immediately were analyzed for microbiological tests. The results showed that there were significant differences (P
    Keywords: Escherichia coli, Staphylococcus aureus, Lactic acid, Ozone, Poultry carcass
  • محمد فرهادی چیتگر، مهدی وریدی، محمد جواد وریدی، احمد بالندری
    کسب اطلاعات در مورد گیاهان بومی بعنوان منابع غذایی عملگر (فراسودمند) رو به افزایش است. یکی از این گیاهان، گونه های وحشی زرشک(Berberis. spp.) می باشد که بررسی خصوصیات فیزیکی و شیمیایی آنها می تواند زمینه کاربردشان را در صنایع غذایی و دارویی فراهم کند. لذا در این پژوهش به منظور معرفی بیشتر این گیاه ارزشمند بومی، سه ژنوتیپ موجود در باغ کلکسیون زرشک پژوهشکده علوم و صنایع غذایی درسال 1390جمع آوری و برخی از خواص فیزیکی و شیمیایی آنها مورد بررسی قرار گرفت. نتایج حاکی از آن بود که بین خصوصیات فیزیکی بررسی شده فقط در طول میوه سه ژنوتیپ اختلاف آماری معنی داری در سطح 5 درصدوجود داشت. هر سه ژنوتیپ حاوی میزان بالای چربی، پروتئین، کربوهیدرات و خاکستر بودند. ژنوتیپ نوشین دارای بالاترین قند احیاکننده (222/0±03/8) و در نتیجه دارای مزه شیرین تری نسبت به دو ژنوتیپ دیگر بود. هر سه ژنوتیپ در مقایسه با سایر میوه ها رنگی نظیر شاتوتو زغال اخته حاوی مقادیر قابل توجهی آنتوسیانین (60/3927-17/950 میلی گرم/ لیتر) و ترکیبات فنلی (35/12-75/9 گرم/ لیتر) بودند که بیانگر خواص سلامت بخش این میوه های خودرو و بومی می باشد. بلحاظ مواد معدنی هر سه ژنوتیپ غنی از ریزمغذی های مورد نیاز بدن انسان نظیر پتاسیم، کلسیم، منیزیم و روی بودند.
    کلید واژگان: آنتوسیانین، زرشک، خواص فیزیکوشیمیایی، فراسودمند
    Mohammad Farhadi Chitgar, Mehdi Varidi, Mohammad Javad Varidi, Ahmad Balandari
    Introduction
    Extensive researches into native plants as a source of functional food have been conducted over the resent years. Meanwhile, barberry has been utilized as one of the main medicinal plants in Iran and many other countries, from the past decades. Currently, it has been known pharmaceutical active ingredients like berberin have wide application in pharmaceutical industry. The genus of Berberis includes about 450–500 species of deciduous or evergreen shrubs in which four species B.integerrima, B.crataegina, B.vulgaris and B.orthobotrys are found in Iran. Iran is the first largest producer of barberry (B.vulgaris) in the world. Apart from that, other species in different parts of Iran grow in wild conditions. B. Integerrima is a thorny shrub with fragile branches to a height of 1 to 3 meters. Its fruits are small and red with a mild sour taste. There are 1-4 small oblong seeds inside. The changes in this species are important and can produce hybrid with other species. B. Integerrima fruits are consumed fresh or used in the preparation of traditional foods. Barberry fruit, which contains large amount of anthocyanins, can be used as an alternative to synthetic colorants. In addition, aqueous extract of barberry has beneficial effects on both cardiovascular and neural system suggesting a potential use for treatment of hypertension, tachycardia and some neuronal disorders, such as epilepsy and convulsion. The physical properties of barberry genotype are important to design the equipment for sorting, transportation, separation, processing and packaging. Identification of the chemical characteristics of Berberis genotype can lead in using them in the pharmaceutical or food industries. Therefore, in order to introduce these native species, physicochemical characteristics of three wild barberries were evaluated
    Materials And Method
    Three native seed genotypes from Semnan province were manually collected from Research Institute of Food Science and Technology (Mashhad). The harvested fruits were instantly stored inside ice box to minimize damages and transported to the laboratory. Over ripened and damaged fruits were separated. Some physical properties (size, geometric mean diameter, sphericity, area, mass and the weight ratio of seeds to fruit) of fruits were determined using 100 repetitions at the natural moisture content of fruits. Chemical properties of samples were determined as follows: total anthocyanin content by the pH differential, total phenolic content by modified Folin–Ciocalteu method, mineral elements amounts such as Potassium(K), Sodium (Na) and Calcium (Ca) by Flame Photometer and microelements (Fe, Cu, Mg, and Zn) by Atomic Absorption Spectrophotometer, Moisture, crude oil, crude protein, ash, reducing sugar, water-soluble extract, pH and acidity were determined according to Indrayan et al,1989 and Iranian National Standard No. 2685. All experiments (except physical properties) were repeated at least three times and results were expressed as mean ± SD. The significant differences between mean values of juice samples were determined by analysis of variance (one way-ANOVA) using Duncan’s test at a significance level of p
    Results And Discussion
    Results showed that in physical properties such as, fruit length there was statistically difference between genotypes. The number of seeds in the three genotypes varied between 1 and 4 numbers. The weight ratio of seeds to fruit was 11.88%, 10.84% and 10.68 in Noshin, Negarin and Parchin genotypes, respectively. All three genotypes contained high amount of protein, total carbohydrate, fat and ash (3.82-5.255%, 21.68-23.97%, 2.04-2.70% and 0.94-1.27%). Noshin contained the highest reduced sugar (8.03±0.222). So, it is sweeter taste than others. In accordance with result, the amount of anthocyanins (950.17-3927.60mg/L) and total phenol (9.75-12.35gr/L) were higher than these fruits in comparison to the other fruits like mulberry and blueberry that represents the health benefits of these wild plants. All the three genotype emerged as good source of minerals, especially K, Ca, Mg and Zn.
    Keywords: Anthocyanin, Barberry, Functional, Physical, Chemical Properties
  • سمیرا فیضی، مهدی وریدی، فاطمه زارع، محمد جواد وریدی
    در این پژوهش ترکیب شیمیایی، پارامترهای رنگ و اثر تغییر pH بر ویژگی های عملکردی ایزوله پروتئین دانه شنبلیله مورد بررسی قرار گرفت. ایزوله پروتئین شنبلیله حاصل دارای 1/89% پروتئین، 66/6% چربی و 33/4% کربوهیدرات بر مبنای وزن خشک بود. تغییر pH بر میزان حلالیت، ظرفیت کف کنندگی و پایداری آن و ظرفیت امولسیون کنندگی و پایداری آن تاثیرگذار بود. کمترین میزان حلالیت، ظرفیت ایجاد کف و امولسیون در pH برابر 5/4 مشاهده شد که نشان دهنده نقطه ایزوالکتریک ایزوله پروتئین شنبلیله بود. بیشترین ظرفیت ایجاد کف(136%) و امولسیون(39%) به ترتیب در pHهای برابر 8 و 3 حاصل شد. میزان جذب آب و روغن در ایزوله پروتئین شنبلیله به ترتیب 7/2 و 6/6 میلی لیتر به ازای هر گرم ایزوله پروتئین و میزان پروتئین کوآگوله آن %77/3 بود.
    کلید واژگان: ایزوله پروتئین دانه شنبلیله، پارامتر رنگ، ترکیب شیمیایی، ویژگی های عملکردی، pH
    Samira Feyzi, Mahdi Varidi, Fatemeh Zare, Mohammad Javad Varidi
    Introduction
    Plant proteins play a significant role in the human diet, and among which legumes are excellent foods with several nutritional and functional advantages and low price. Among legumes, fenugreek (Trigonella foenum graecum) seed, belonging to the Fabaceae family, is a great source of plant proteins, with a total protein content of about 25.00 – 38.60%. Functional properties are defined as physical and chemical properties, which could be altered due to the protein source and procedures used for flour preparation, protein concentrate and isolate extraction. Physiochemical parameters such as pH, temperature, salt and ionic strength can also highly affect proteins, functional properties.Therefore, in this study color parameters and functional properties of fenugreek protein isolate (FPI) were investigated. Also, the effect of pH changes on protein solubility, foaming capacity (FC) and stability (FS), emulsifying capacity (EC) and stability (ES) was studied.
    Materials And Methods
    Fenugreek seeds were obtained from a retail market in Isfahan, Iran. All chemicals were of analytical grade, and were purchased from Sigma Chemical Co. (St Louis, MO, USA), and Merck KGaA (Darmstadt, Germany).
    Protein Isolation: Protein from 10g defatted fenugreek flour (DFF) was extracted with 0.33M sodium chloride solution; the ratio of DFF to NaCl solution was set at 1:20 (w/v) and pH was adjusted to 9.25. The stirring period was 2 h, during which pH was also adjusted. Aliquots were then centrifuged and supernatants were adjusted to pH 4.5 (isoelectric pH of fenugreek protein). Again, the protein solution was centrifuged in order to precipitate the protein. Protein precipitate was washed twice with deionized water, followed by centrifugation and resolubiliztion by adjusting the pH to 7.2. The extraction process was carried out at room temperature (25°C).
    Color parameters: A digital colorimeter was used to measure the color of full fat and defatted fenugreek flours, and FPI samples. Color parameters were recorded in L*a*b* space.
    Protein solubility: Protein solubility of FPI at pH 2-10 was determined. A 1.5% (w/v) solution of sample was made in deionized water for each pH. The solutions were treated with either 0.5M HCl or 0.5M NaOH to obtain certain pH (2-10), while stirring. The slurry was centrifuged to separate the supernatant. Protein content was determined by the Biuret method using spectrophotometer at 540nm wavelength. Calibration was done using bovine serum albumin (BSA) as external standard.
    Viscosity: A suspension of 5% (w/v) FPI in distilled water was prepared. Viscosity of sample was determined using a programmable Brookfeildrheometer, using spindle ULA at room temperature.
    Coagulated protein: Percent of coagulated protein was measured by preparing 0.2g of FPI in 10mL of 0.025M citrate-phosphate buffer (pH 7.0). The solution was stirred, followed by centrifugation. The remaining supernatant was heated for 15min in a 100°C water bath, after cooling the same procedure was repeated. The absorbance of both samples, before heating (A1) and after heating (A2), was measured at 540nm according to Biuret method. The percent of coagulated protein was calculated by the following equation: Coagulated protein = (A1 – A2 / A1) × 100 (1)
    Foaming capacity and stability: FC and FS were determined using 2% (w/v) FPI solution in distilled water. For each sample solution, the pH was adjusted to desired level (2, 3, 4.5, 6, 8, and 10). The solution was stirred slightly for 5min and then was whipped vigorously by a disperser. The volume of solution before whipping, also the total volume of solution and foam after whipping were recorded as V0 and V1, respectively. The foam capacity percentage was calculated as: FC (%) = (V1- V0/V0) × 100 (2)
    Foam stability was determined as the total volume of solution and foam at 30, 60, 90 and 120 min at room temperature and it was recorded as V2. Foam stability (FS) was calculated as: FS (%) = (V2 - V0) × 100/ (V1 - V0) (3)
    Emulsifying capacity and stability:For EC and ES, a 1% (w/v) FPI solution in distilled water was prepared. The pH was adjusted to desirable level (2, 3, 4.5, 6, 8, and 10) followed by stirring for 5min, then sunflower oil was added. The mixture was homogenized to make emulsion, followed by centrifugation. Then the height of both emulsified layer after centrifugation (H1) and the total height of content before centrifugation (H0) were measured. Emulsion capacity was calculated as: EC (%) = (H1/H0) × 100 (4)
    The ES (%) was calculated at 0, 30, 60, 90 and 120 min by measuring height changes (H2).
    ES (%) = (H2/ H1) × 100 (5)
    Results And Discussion
    FPI with 89.1% protein content had significantly (p
    Keywords: color parameters, fenugreek protein isolate, functional properties, pH, proximate chemical composition
  • یونس زاهدی، محمد جواد وریدی، مهدی وریدی*

    در این پژوهش تاثیر جنسیت، نوع عضله (دو سر ران (BF) و طویل سینه ای (LT)) و زمان 14 روز بر الگوی پروتئولیز پروتئین های میوفیبریلی گوشت شتر با استفاده از SDS-PAGE بررسی شد. شدت پروتئولیز زنجیره سنگین میوزین (MHC) و اکتین خیلی جزئی و در جنس ماده MHC بیشتر از جنس نر تجزیه شد (05/ 0>P). پروتئولیز پروتئین C تحت تاثیر زمان، جنسیت و نوع عضله قرار گرفت (05/ 0>P).
    α-اکتینین در هفته دوم پس از کشتار توسط کاتپسین ها تخریب و شدت پروتئولیز در عضله LT کمتر از BF بود (05/ 0>P). قسمت عمده تخریب دسمین در هفته اول نگهداری انجام و در عضله LT بیشتر از عضله BF بود (05/ 0>P). تروپونین T تا روز پنجم نگهداری حدود 80% تجزیه شد و هر دو زمان و نوع عضله تاثیر معنی داری بر شدت پروتئولیز ایجاد نمود. باند 30 کیلو دالتون 24 ساعت پس از کشتار پدیدار شده و شدت باند آن در مدت 14 روز نگهداری افزایش معنی داری داشت (05 /0>P). نتایج نشان داد زمان مهم ترین فاکتور تاثیرگذار بر تجزیه پروتئین های میوفیبریلی گوشت در مدت نگهداری بوده و بجز اکتین و میوزین پروتئولیز سایر پروتئین ها تحت تاثیر زمان نگهداری قرار گرفت. نوع عضله نیز در تجزیه دسمین و پروتئین-های تنظیم کننده (α-اکتینین و تروپونین T) نقش معنی داری ایفا نمود.

    کلید واژگان: پروتئولیز، دوسر ران، طویل سینه ای، گوشت شتر، SDS، PAGE
    Younes Zahedi, Mohammad Javad Varidi, Mehdi Varidi

    In this study, effect of gender, muscle type (biceps femoris (BF) and longissimus thoracis (LT)) and storage time (14 days) on the proteolytic pattern of camel meat myofibrillar proteins was investigated using SDS-PAGE. Heavy chain myosin (MHC) and actin changed little during postmortem aging of muscles. Proteolysis intensity of MHC in female camels was significantly more than male ones (p<0.05). Degradation of C-protein was influenced by storage time, gender and muscle type (p<0.05). α-actinin was proteolyzed by catepsins at the second week of aging, and its breakdown was more pronounced in BF than LT muscle (p<0.05). Principal degradation of desmin occurred at the first week of storage. Troponin-T was proteolyzed by about 80% up to 5 days of storage, and muscle type and aging time significantly affected its proteolysis. The30 kDapolypeptideas a main product of Troponin-T degradation began to appear 24 h postmortem, and its band intensity increased significantly during 14 days of storage (p 0.05). In conclusion, storage time was the most important factor affecting degradation of myofibrillar proteins during storage at 4oC. Also, muscle type was a main factor at proteolysis of desmin cytoskeletal protein and some regulating proteins (α-actinin and Troponin-T).

    Keywords: Biceps femoris, Camel meat, Longissimus thoracis, Proteolysis, SDS, PAG
  • محمد فرهادی چیتگر، محمد جواد وریدی، مهدی وریدی، فخری شهیدی

    زرشک بیدانه یکی از محصولات کشاورزی است که در دنیا فقط در ایران به صورت انبوه کشت میشود. تولید فراورده های جانبی این محصول رو به گسترش است. یکی از کاربردهای این محصول می تواند استفاده از آنتوسیانینهای موجود در آن به عنوان رنگ طبیعی در فرآورده های غذایی باشد. این ترکیبات در عین مفید بودن برای سلامتی انسان، ارزش افزودهی بسیار بالایی نیز دارند. دما و زمان حرارتدهی تاثیر بسزایی بر پایداری آنتوسیانینها دارد. ساختمان آنتوسیانینها تحت تاثیر دما تخریب می شود و شدت تخریب به حضور اکسیژن، pH و ساختار شیمیایی آنها بستگی دارد. در این پژوهش اثر دما و ماده جامد بر سینتیک پایداری آنتوسیانینهای زرشک بیدانه در دامنه دمایی 90-70 درجه سانتیگراد مورد بررسی قرار گرفت. نتایج نشان داد که تجزیه حرارتی آنتوسیانینها در عصاره و کنسانتره زرشک از معادله سینتیکی درجه اول پیروی میکند. مقادیر نیمه عمر به دست آمده در دماهای70، 80 و 90 درجه سانتیگراد به ترتیب 02/6، 32/3 و 06/1 ساعت برای عصاره(حاوی 96/18درصد ماده جامد)، 32/3، 84/1 و 76/0 ساعت برای کنسانتره حاوی 30 درصد ماده جامد و 19/3، 31/1، 49/0ساعت برای کنسانتره حاوی 50 درصد ماده جامد بودند. وابستگی دمایی تجزیه آنتوسیانینها در عصاره و کنسانتره زرشک با استفاده از معادله آرنیوس مدل سازی شد. با افزایش ماده جامد مقدار انرژی فعالسازی افزایش و مقادیر اندیس D و اندیس Z کاهش یافتند. این نتیجه موید این است که تخریب آنتوسیانینها در کنسانتره زودتر از عصاره رخ میدهد.میزان تخریب آنتوسیانینها در عصاره و کنسانتره ها با افزایش دما افزایش یافت.

    کلید واژگان: آنتوسیانین، سینتیک پایداری، عصاره زرشک، کنسانتره
    Mohammad Farhadi Chitgar, Mohammad Javad Varidi, Mahdi Varidi, Fakhri Shahidi

    Barberry is an agricultural product، which is cultivated in large amounts، only in Iran. Its popularity as an ingredient for many by-products has grown recently. It contains anthocyanins which can be used as natural food colorants. These compounds are useful for human health and have high economic value. Magnitude and duration of heating has a strong influence on anthocyanin stability. Temperature degrades the anthocyanins and the rates of degradation depend on the presence of oxygen، pH and their chemical structure. In this study the effect of temperature and solid content on degradation kinetic of anthocyanins in Berberis vulgaris var asperma were determined over a temperature range of 70-90◦C. Analysis of kinetic data suggested a first-order reaction for the degradation of barberry juice and concentrate anthocyanins. The half-life values were calculated 6. 02، 3. 32 and 1. 06h for juice، 3. 32، 1. 84 and 0. 76h for concentrate of 30 Brix and 3. 19، 1. 31 and 0. 49h for concentrate of 50 Brix between 70 and 90◦C، respectively. The temperature-dependent degradation was modeled using Arrhenius equation. By increasing solid content، the activation energy value was increased but D-value and Z-values were reduced. The results shows that the degradation of anthocyanins in concentrates occurred at a faster rate than in juice. By increasing the temperature degradation rates were increased both in juice and concentate.

    Keywords: Anthocyanins, Degradation kinetics, Berberis juice, Concentrate
نمایش عناوین بیشتر...
بدانید!
  • در این صفحه نام مورد نظر در اسامی نویسندگان مقالات جستجو می‌شود. ممکن است نتایج شامل مطالب نویسندگان هم نام و حتی در رشته‌های مختلف باشد.
  • همه مقالات ترجمه فارسی یا انگلیسی ندارند پس ممکن است مقالاتی باشند که نام نویسنده مورد نظر شما به صورت معادل فارسی یا انگلیسی آن درج شده باشد. در صفحه جستجوی پیشرفته می‌توانید همزمان نام فارسی و انگلیسی نویسنده را درج نمایید.
  • در صورتی که می‌خواهید جستجو را با شرایط متفاوت تکرار کنید به صفحه جستجوی پیشرفته مطالب نشریات مراجعه کنید.
درخواست پشتیبانی - گزارش اشکال